,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Band Straightening Machine

          used Sheet metal working / shaeres / bending Band Straightening Machine SCHULER SMG


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-742130 · Band Straightening Machine

          SCHULER SMG - - - 2004 -

          Technical details
          band width 1050 mm︱plate thickness 8 mm︱number of rolls 8 ︱----------------------------------- ︱DECOILER . ︱ - design : single coil . ︱ - sheet width max 1050 mm︱ - sheet width (min) 150 mm︱ - max. weight of coil 22 to︱ - max. diameter of coil 2000 mm︱ - min. internal diameter of coil 570 mm︱FEEDERS . ︱ - feeder: type : roll feeder . ︱ - sheet width max 1050 mm︱ - sheet thickness max 150 mm︱LEVELER UNIT . ︱ - sheet width max 1050 mm︱ - sheet width (min) 150 mm︱ - sheet thickness max 8 mm︱ - sheet thickness (min) 2.5 mm︱
          Technical description : Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of: - LAWECO COIL LOADING CAR - HSK-280-1050 DECOILER HASP - SHF 8-96 / 160-1050 SHEET METAL STRAIGHTENER - ADCH 1050-8 TRANSVERSE CUTTING UNIT This unit does not require any BENDING PIT, because of being of short structural form .
            band width 1050 mm
            plate thickness 8 mm
            number of rolls 8
            DECOILER .
            - design : single coil .
            - sheet width max 1050 mm
            - sheet width (min) 150 mm
            - max. weight of coil 22 to
            - max. diameter of coil 2000 mm
            - min. internal diameter of co. 570 mm
            FEEDERS .
            - feeder: type : roll feeder .
            - sheet width max 1050 mm
            - sheet thickness max 150 mm
            LEVELER UNIT .
            - sheet width max 1050 mm
            - sheet width (min) 150 mm
            - sheet thickness max 8 mm
            - sheet thickness (min) 2.5 mm
            Description :
            Technical description :

            Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of:

            - LAWECO COIL LOADING CAR
            - HSK-280-1050 DECOILER HASP
            - SHF 8-96 / 160-1050 SHEET METAL STRAIGHTENER
            - ADCH 1050-8 TRANSVERSE CUTTING UNIT

            This unit does not require any BENDING PIT, because of being of short structural form .


          Datasheet
          Request / Contact

          coil line

          used Sheet metal working / shaeres / bending coil line AMTEC PBS 24/24


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-729197 · coil line

          AMTEC - PBS 24/24 - - 1994 -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - total power consumption 30 kW︱ - mains voltage 500 V︱ - mains frequency 50 Hz︱
          Technical description : This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks. The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed. The effluence rate of the spray valves for top and bottom side can be adjusted individually. A heating device facilitates the processing with high viscosity lubricants. - Year of Manufacture: December 1994 - Max. Blank length: 1800mm - Max. Blank width: 2500mm - Medium emulsion, oil, grease
            - total power consumption 30 kW
            - mains voltage 500 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks.
            The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed.
            The effluence rate of the spray valves for top and bottom side can be adjusted individually.
            A heating device facilitates the processing with high viscosity lubricants.

            - Year of Manufacture: December 1994
            - Max. Blank length: 1800mm
            - Max. Blank width: 2500mm
            - Medium emulsion, oil, grease


          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line SCHARF WESTFALIA


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-739033 · coil line

          SCHARF WESTFALIA - - - -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - clamping surface (left-right) 4000 mm︱ - clamping surface (front-back) 2050 mm︱ - rotation 360 °︱ - - rotation speed 1.3 /min︱ELECTRICAL SPECIFICATIONS . ︱ - mains voltage 380 V︱ - mains frequency 50 Hz︱
          Technical description : Blank Pallet Turnover Device / Blank Handlling (needs retrofit)
            - clamping surface (left-right. 4000 mm
            - clamping surface (front-back. 2050 mm
            - rotation 360 °
            - - rotation speed 1.3 /min
            ELECTRICAL SPECIFICATIONS .
            - mains voltage 380 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            Blank Pallet Turnover Device / Blank Handlling (needs retrofit)


          Datasheet
          Request / Contact

          Strip Straightening Machine

          used Sheet metal working / shaeres / bending Strip Straightening Machine MÜLLER WEINGARTEN


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-740263 · Strip Straightening Machine

          MÜLLER WEINGARTEN - - - - SIEMENS S7

          Technical details
          sheet width 2000 mm︱plate thickness 1.8 mm︱cutting lenght mm︱Controls SIEMENS S7 ︱----------------------------------- ︱PRESS DESIGN . ︱ - frame design : H-frame . ︱ - openings in uprights : yes . ︱ - opening in table : yes . ︱ - moving bolster : yes . ︱PRESS TABLE . ︱ - clamping surface (left-right) 2800 mm︱ - clamping surface (front-back) 2800 mm︱ - height above floor level 375 mm︱RAM . ︱ - ram force 800 to︱ - clamping surface (left-right) 2800 mm︱ - clamping surface (front-back) 2800 mm︱ - stroke 350 mm︱ - number of strokes max 55 /min︱
          Technical description : SCOPE OF DELIVERY/ COMPONENTS: - Coil carrier with separate crop shear - single sided de-coiler, - max coil width 2000mm, max weight 30tons - Two exchangeable straightening units ( cassette type ) with 13 straightening rolls, max blank thickness 1.8mm, max. blank width 2000mm - Loop pit - Roll feeder with roll diameter 220 mm, feed length max 4000mm - Monitoring of oil film thickness via scanner - Mechanical Blanking Press MUELLER WEINGARTEN VK 800.28.35 ( 1983) * with max. 55 strokes per minute * Table dimensions (clamping surface 2800 x 2800 mm * 2 Changing tables and 350mm stroke travel - FIRST NSM Blank de-stacker unit with 2 unloading stations - Max. blank dimensions 4000 x 2000mm - Conveyance speed 30 - 150 meters per minute - Packet weight max. 12000 kgs - Packet height max. 650 mm. (On this part finishing for side panel cutouts via controlled dies) - SECOND NSM unloading and stacking unit (90° towards flow through) - for smaller blanks and form blanks. - max. size 1650 x 800 mm - max. heigth with pallet = 450 mm. PERFORMANCE: 240 to 270 tons cut blanks per day in a 3 shift operation Description of condition : Blanking system for OUTER SKIN PANELS, with straightening machine cassettes to change. This system is "COIL CUT" capable. Video at: https://www.youtube.com/watch?v=1_gz2WxMMO0&feature=youtu.be The complete conveyor system was revised in 2011: - SEW and Siemens components electronically synchronized: NEW - Cardan shafts of the straightening system: NEW - Hinge side guide: Optimized - Complete electrics and electronics (S7): NEW - Drive block of the press: • BEFORE: grease lubrication • NOW: Circulating oil lubrication Also: NSM destacking system with two stations each up to 4000 mm in length and a side NSM destacking system with max. blank dimensions of 1650 x 800 mm. = COIL CUT CAPABLE SYSTEM !! - 1 HUB = max. 4 PARTS through nesting and removal in longitudinal and transverse directions.
            sheet width 2000 mm
            plate thickness 1.8 mm
            Controls SIEMENS S7
            PRESS DESIGN .
            - frame design : H-frame .
            - openings in uprights : yes .
            - opening in table : yes .
            - moving bolster : yes .
            PRESS TABLE .
            - clamping surface (left-right. 2800 mm
            - clamping surface (front-back. 2800 mm
            - height above floor level 375 mm
            RAM .
            - ram force 800 to
            - clamping surface (left-right. 2800 mm
            - clamping surface (front-back. 2800 mm
            - stroke 350 mm
            - number of strokes max 55 /min
            Description :
            Technical description :

            SCOPE OF DELIVERY/ COMPONENTS:
            - Coil carrier with separate crop shear
            - single sided de-coiler,
            - max coil width 2000mm, max weight 30tons
            - Two exchangeable straightening units ( cassette type ) with 13 straightening rolls,
            max blank thickness 1.8mm, max. blank width 2000mm
            - Loop pit
            - Roll feeder with roll diameter 220 mm, feed length max 4000mm
            - Monitoring of oil film thickness via scanner
            - Mechanical Blanking Press MUELLER WEINGARTEN VK 800.28.35 ( 1983)
            * with max. 55 strokes per minute
            * Table dimensions (clamping surface 2800 x 2800 mm
            * 2 Changing tables
            and 350mm stroke travel

            - FIRST NSM Blank de-stacker unit with 2 unloading stations
            - Max. blank dimensions 4000 x 2000mm
            - Conveyance speed 30 - 150 meters per minute
            - Packet weight max. 12000 kgs
            - Packet height max. 650 mm.
            (On this part finishing for side panel cutouts via controlled dies)

            - SECOND NSM unloading and stacking unit (90° towards flow through) - for smaller blanks and form blanks.
            - max. size 1650 x 800 mm
            - max. heigth with pallet = 450 mm.

            PERFORMANCE:
            240 to 270 tons cut blanks per day in a 3 shift operation


            Description of condition :

            Blanking system for OUTER SKIN PANELS, with straightening machine cassettes to change. This system is "COIL CUT" capable.

            Video at: https://www.youtube.com/watch?v=1_gz2WxMMO0&feature=youtu.be

            The complete conveyor system was revised in 2011:
            - SEW and Siemens components electronically synchronized: NEW
            - Cardan shafts of the straightening system: NEW
            - Hinge side guide: Optimized
            - Complete electrics and electronics (S7): NEW
            - Drive block of the press:
            • BEFORE: grease lubrication
            • NOW: Circulating oil lubrication

            Also:
            NSM destacking system with two stations each up to 4000 mm in length and a side NSM destacking system with max. blank dimensions of 1650 x 800 mm.

            = COIL CUT CAPABLE SYSTEM !! - 1 HUB = max. 4 PARTS through nesting and removal in longitudinal and transverse directions.


          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.

          Goedicke Werkzeugmaschinenhandels GmbH   74172 - Neckarsulm Heinz-Nixdorf-Str. 2 Deutschland
          Goedicke Werkzeugmaschinenhandels GmbH

          Heinz-Nixdorf-Str. 2



          Contact Trader


            Goedicke Werkzeugmaschinenhandels GmbH
           Heinz-Nixdorf-Str. 2
            74172 - Neckarsulm
            Deutschland
            +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
            info@goedicke.com
            www.goedicke.com
            Contact person:

           




          Machine category


          Aufspanntisch · Aufspannwürfel · Bandanlage · Bandricht- und Abschneideanlage · Bandrichtmaschine · Betriebseinrichtung · CNC Drehmaschine · Coilhebeverrichtung · Einstellgerät · Elektronik / SPS-Steuerungen · Fahrständerfräsmaschine · Förderband · Industrieroboter · Industriesauger · Plattenfeld · Portalfräsmaschine · Radialbohrmaschine · Roboter - Handling · Robotersteuerungen · Traktor · Transportwagen · Tuschierpresse · Werkzeugschrank ·