Transfer Press
Machinelist: Transfer Press
Transfer Press
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-18366 · Transfer Press
FAGOR - TLE 4-1500 - - 2002 - Siemens S7
Technical details
- Siemens S7 Control - Complete double cassette blank feeder - 2 bolsters onto t-track - hydraulic clamping on slide - manual clamping on bolster - Servo Transfer 3-Axis - Blank feeder -De-Stacker: Max sheet dimensions: 1850 mm x 750 mm Max sheet dimensions: 500 mm x 200 mm Sheet thickness: 0.5 - 4.0 mm Max sheet weight: 30 kgs Max weight on de-stack table: 5000 kgs Max pack height w/out pallet: 500 mm Max de-stack speed: 20 spm (front) 18 spm (back)
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-18044 · Transfer Press
HITACHI ZOSEN - K2 (2400 TR) - - 1996 -
Technical details
TRANSFER PRESS Capacity: • No.1 Slide spec 1600(1000/600)ton • No.2 Slide spec 800(400/400)ton • Die height: 1200mm • Slide adjustment: 200mm • Slide Stroke • No.1 Slide spec 900mm • No.2 Slide spec 800mm Bolster area • No.1 Slide spec 3600x2400mm • No.2 Slide spec 5400x2400mm Slide area • No.1 Slide spec 3600x2400mm • No.2 Slide spec 5400x2400mm • Stroke per/min: 8~18 SPM • TRANSFER • Feed stroke: 1800mm • Clamp stroke: 400mm • Lift stroke: 200mm • DIE CUSHION • Capacity: 200ton • Stroke: 300mm
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-18043 · Transfer Press
HITACHIZOSEN - K1 (3550 TR) - - 1996 -
Technical details
• Blank Size: • Length(Feed Direction): 400(500)-1800mm • Width: 900-3200mm • Thickness: 0.45-2.3mm • Capacity: 2300+1200ton (15000/800, 600/600) • Die Height: 1250mm • Slide Adjustment: 200mm • Slide Stroke: 1000mm • Bolster Area: 4000x3600, 6100x3600mm • Slide Area: 4200x3600, 6300x3600mm • Clear distance: 4450, 6550mm • M/B Carriage Capacity: 50.57ton • Feed Level(From Bolster Top Face): 700mm(Feed Bar Top Face Height) • Slide Clamper Position: 300, 600mm (8 Sets) • Clamper Travelling Stroke: 1300(L-R)mm • Lift Stroke: 250mm • Feed Stroke: 2100mm • Clamp Stroke: 500mm • Feed Bar Inside Distance: 1800, 1900, 2100, 2400, 2700, 3000, 3300, 3600mm • Scrap Chute Direction: F-B & L-R Direction • Die Cushion Device: Stroke Locking 200ton Air Cushion 300mm • Line Production Speed: 8~16(5) SPM • Tri-axis transfer unit • Type of feed: Tri-axis feed (Clamp-Lift-Feed-Lower-Unclamp-return) • Type of drive: Cam mechanism driven by power take off shaft • Number of stamping stages: Five(5) • Feed stroke: 2100mm constant • Clamp stroke: 500mm constant(each side) • Lift stroke: 250mm constant • Feed bar inner distance(at clamp position) 3600, 3300, 3000, 2700, 2400, 2100, 1900, 1800mm (8 steps) • Feed bar height: 700mm constant(Feed bar top face to bolster top face at “Lower” position) • Feed direction: Left to right • Location of cam box: Exit side of the press • Sectional dimension of feed bar: Width 340mm x Height 240mm
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-18552 · Transfer Press
KOMATSU - E2T 800 - - 1990 -
Technical details
• Capacity:: 800 tons • Drive type: Top drive • Type of operation: Acentric drive • Number of points: Attaching 2 point Plunger guide • Number of strokes: 2D 12-25, 3D 12-20 • Stroke Length: 500mm • Die height (from top of Bolster to bottom of slide): 900mm • Slides Adjusted: 150mm • Slide size (left and right) 4800x1400mm • Bolster size: 4800x1400x300mm • Main motor: SCR90(kw) • Electrical: 400V • Station: 5 • Maximum depth: 2D 160mm, 3D 125mm
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-18533 · Transfer Press
KOMATSU - E4S 1200.05,90-MF D - - 1982 -
Technical details
• Capacity: 1200 tons • Maximum station capacity: 450 tons • Slide stroke: 600mm • Slide Adjustment: 150mm • Number of slide strokes: 5 • 2D 10 ~ 22s.p.m • 3D 10 ~ 22 s.p.m • Type Distance (Feed Stroke): 900mm • Day height (from top to top of ballstar): 1020mm • Feed Heat (from top of Ballstar) - 2 Dimensional: 495mm - 3 Dimensional: 500mm • Slide size (left and right x before and after): 4,800mm x 1,900mm • Ballstar size (left and right x front and back x thickness): 4,500mm x 1,700mm x 300mm • Height from floor to top of bolster: 730mm • Maximum Workload: - In the range of 10 ~ 15s.p.m: Max 20 t.m - From 16 to 22s.p.m range: Max 30 t,m • Spindle motor output: SCR Max 160kW • Product Lift Stroke (3D): 100mm • Cramp Stroke: 250mm • Transfer width: 900mm. 1,100 mm, 1,300 mm 1,500 mm, 1,700 mm • Die cushion device: - Type: Pneumatic - Capacity: First, station 80 tons, Station 2 to 5: 35 tons - Stroke (effective) Each station 250 mm • Part size (left and right x before and after): Each station 800mm x 1,420mm • Locking device: None
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-19119 · Transfer Press
KOMATSU - E4T 2500.07.70-MF-D - - 1990 -
Technical details
• CAPACITY : 2500ton • Point pressure capacity: • - Upper 1600t • - Down 900ton • Slide stroke: 650mm • Slide adjustment: 225mm • Slide stroke number: continue 9~25spm • Die-height: 1250mm • Slid size(LxR ,FxB): 5400x2400mm • Bolster size(LxR, FxB, T): 5200x2300x200mm • Balance capacity: 30ton • Main motor: DC 355kw • Feed back(bolster upper side): 700,780mm • Feed back stroke : 550,700,1000mm • Cramp stroke : 0-250mm • Lift stroke: 0~150mm • Transfer inner size(cramp): 650~2200mm • Die cushion capacity • No.1 station 120ton • No.2 station 80ton • No.3 station 60ton • No.5,6,7 station: 5ton • Stroke: 200mm • Bed size: 480x1780mm • Stop time: 430ms
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-17868 · Transfer Press
KOMATSU - LE8T3500.05.210-MF.D - - 1990 -
Technical details
Maximum capacity (Total) 3500 metric ton Upper stream capacity: 2300 metric ton Lower stream capacity: 1200 metric ton Slide stroke Upper stream Lower stream: 1000mm Die height: 1250mm (from bolster top face to slide bottom face) Slide adjustment: 200mm Number of slide strokes: 5&6~14spm Bolster dimensions (U-LO x R-L x Thickness) Upper stream bolster 4000 x 3600 x 300mm Lower stream bolster 6100 x 3600 x 300mm Slide dimensions (U-LO x R-L x Thickness) Upper stream slide 4200 x 3600mm Lower stream slide 6300 x 3600mm Balancer capacity Upper stream balancer 24 metric ton Lower stream balancer 36 metric ton Main motor output: DC. 280kw Working energy (at 10~14 spm) 90 t-m (at 6~9 spm) 55 t-m Bolster height 810mm (from floor to top face of bolster) Transfer feeder Feed height (from top face of bolster) 700mm Feed stroke (distance between dies) 2100mm Clamp stroke ( on each side) 500mm Lift stroke: 250mm Bar closed 1800, 1900, 2100, 2400, 2700, 3000. 3300. 3600mm Station: 5 Capacity of die cushion (Pneumatic type) 200 metric ton Stroke (effective) 300mm Pad dimensions (U-LO x R-L) 1700 x 3200mm Remark: Press type: Top Drive (Upper: Rink, Lower: Eccentric) Point of suspension: 8points Press Capacity (Ton): 3,500Ton (1,500/800/600/600) Slide Capacity: Upper: Max. 15000Ton / Lower: Max. 800Ton Station Capacity.(Allowable): W3: Max. 400Ton/ W4: Max. 400Ton/ W5: Max. 400Ton Slide stroke: Upper: 1,019mm/Lower: 1,000mm Max. Allowable weight of M/B: Upper: 50Ton/ Lower: 75Ton Upper Die weight (Balance Capacity.): Upper: 24Ton/ Lower:36Ton Die cushion Type: Pneumatic & Hydraulic Damper Capacity: Max. 200Ton Stroke: 300mm Locking device: Not equipped
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403328 · Transfer Press
MÜLLER - ZE 400 - - 1992 -
Technical details
HYDRAULICALLY TRANSFER PRESS with tape arrangement Constr.: Müller-Weingarten Machine type: ZE 400 Year: 1992 Working hours Press: 31604 Working hours Coiling machine 26675 Control: CNC The press is combined with a Coiling machine constr. SCHLEICHER Press " ram force: 4.000 kN " back tension force 750 kN " ram dimension: 2.000 x 1.300 mm " installation height: max 1.000 mm " distance table/ram Upper stroke : 1.000 mm Lower stroke: 300 mm " die cushion Die cushion force: 1.600 kN Die cushion stroke: 200 mm " table size: 2.000 x 1.300 mm " ram stroke: 700 mm " table height above ground: 900 mm " total height above ground:: 5.700 mm " slowing-down time: 140 ms " security distance: 224 mm " control system press-: Müller PBS1 " installed wattage: 110 kW " Machine weight Press: 48 t " required space: 5,0 m x 3,5 m x 5,7 m -L x W x H " oil filling: ca. 2.100 ltr. Coiling machine " Coil-outer- Ø: max. 1.600 mm " Coil-inner- Ø: 500 - 600 mm " Coil-weight: 12,5 t " strip width: 200 - 1600 mm " strip thickness stainless stee up to 3 mm. " strip thickness steel: up to 4 mm " strip thickness Alu: up to 4 mm " control: Siemens S5 " required space: 10.5 m x 4.74 m x ca.3 m L x W x H Loop hole: 2.55 m x 2.1 m x 1.5 m L x W x H Additional information " The line is equipped with light barriers. " Equipment according to current Prevention of Accidents requirements. " Advance rollers can be lightened by springs, so the line can also treat Aluminium without any difficulties. Total weight. approx. 62 to. MORE PHOTOS ARE AVAILABLE UPON REQUEST.
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-18367 · Transfer Press
ROVETTA - S4-16000 /E / ET3 - - 1997 - Siemens S5
Technical details
Siemens S5 Control Coil feed, 2 bolsters F-B onto t-track, hydraulic clamping on slide, manual clamping on bolster Coil Feed: - Coil Width: 475- 1800mm - Coil Thickness 0,6 - 3,2mm - Coil Weight : 10t - max Coil Outer Diameter: 1800mm
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-18368 · Transfer Press
ROVETTA - S4-18000 /LD /ET3 - - 1999 - Siemens S5 Control
Technical details
Siemens S5 Control Complete with coil feed 2 moving bolsters on t-track, hydraulic clamping on the slide, manual clamping on the bolster Coil Feed: - Coil Width: 475- 1800mm - Coil Thickness 0,6 - 3,2mm - Coil Weight : 10t - max Coil Outer Diameter: 1800mm
Perfil del comerciante: Prodeq Trading
Ltd.
Contactar con el comerciante
Comercio Prodeq
Ltd.
Reckholder 1
9527 - Niederhelfenschwil
Suiza
(0041) 71 - 948 7060 "> (0041) 71 - 948 7060
(0041) 71 - 948 7069
info@prodeq.ch
www.prodeq.ch
Ltd.
Reckholder 1
9527 - Niederhelfenschwil
Suiza
(0041) 71 - 948 7060 "> (0041) 71 - 948 7060
(0041) 71 - 948 7069
info@prodeq.ch
www.prodeq.ch
Perfil del comerciante
Grupo ProdEq - Socio de la industria.
Comercio al por mayor de maquinaria metalmecánica.
Comercio al por mayor de maquinaria metalmecánica.
Vendemos y compramos:
- Herramientas de máquina
- maquinaria de fabricación de metal
- equipo industrial usado
- plantas completas
Internacionalidad:
Nuestro red de ventas internacional Proporciona acceso a los mercados globales de maquinaria usada / segunda mano.
Nuestro red de ventas internacional Proporciona acceso a los mercados globales de maquinaria usada / segunda mano.
Directorio de maquinaria en línea:
Busque y encuentre el equipo y la máquina herramienta que desee (CNC o no CNC) en nuestro directorio en línea. Todas las máquinas en venta se publican con información completa.
Grandes proyectos - pequeños proyectos:
Realizamos subastas y liquidaciones y realizamos las ventas de sus equipos excedentes. Por favor, póngase en contacto con nosotros sobre cualquier próxima venta de activos excedentes. Nosotros intercambiamos máquinas individuales al igual que plantas industriales completas.
Especialidad:
Independientemente si usted vende o compra máquinas o equipos usados. Base su decisión de venta en nuestra tasación y su decisión de compra en nuestro asesoramiento técnico.
Más que de segunda mano:
También negociamos una cartera seleccionada de Nuevo equipamiento, No dude en preguntarnos.
Comercio y servicio:
Pregunte por servicios postventa como desmontaje, revisiones, transporte, importación y exportación y financiación.
Equipo de maquinaria:
ProdEq Trading GmbH Reckholder 1, 9527 Niederhelfenschwil, Suiza |
ProdEq Maschinenhandel GmbH Unterdorf 34, 6532 Ladis, Austria |
ProdEq Germany GmbH Weberweg 2, 42499 Hückeswagen, Alemania |
Post-Venta Carreras SA Pol. Ind. Els Plans d'Arau, C / Nicolau Copèrnic 2, 08787 La Pobla de Claramunt, España |
Guerrieri srl Piazza Giosuè Carducci 6, 21100 Varese (VA), Italia |
ProdEq doo Trgovina z industrijskimi stroji Opekarniska 4, 2327 Race, Eslovenia |
Oficina de representación ProdEq Maschinenhandel GmbH 16110 Nilüfer / Bursa, Türkei |
Otras oficinas de representación: Mexico Póngase en contacto con una de las oficinas de ProdEq anteriores para obtener más información. |
TOP Manufacturer:
KOMATSU -
Prodeq Trading GmbH
Reckholder 1
Contact Trader
Prodeq Trading GmbH
Reckholder 1
9527 - Niederhelfenschwil
Schweiz
(0041)71 - 948 7060
(0041)71 - 948 7069
info@prodeq.ch
www.prodeq.ch
Contact person:
Reckholder 1
9527 - Niederhelfenschwil
Schweiz
(0041)71 - 948 7060
(0041)71 - 948 7069
info@prodeq.ch
www.prodeq.ch
Contact person: