,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Double Column Drawing Press -Hydr.

          Machinelist: Double Column Drawing Press -Hydr.


          Double Column Drawing Press -Hydr.

          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 1000-40.3.3


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163054A · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 1000-40.3.3 - - 2005 - Siemens S 7

          Technical details
          Pressure 1000 t︱distance between columns 4100 mm︱stroke 1200 mm︱Distance table/ram, stroke up 2100 mm︱Table surface area 4000 x 2200 mm︱pressure of drawing cushion in table 360 t︱Die cushion stroke in table 300 mm︱Die cushion area in table 3500 x 1600 mm︱Die cushion pressure in ram 100 t︱Die cushion stroke in ram 160 mm︱Die cushion area in ram 3250 x 1600 mm︱Ram surface 4000 x 2200 mm︱Side window 1300 mm︱Oil volume 8000 l︱Power capacity 300,0 kW︱Weight t︱Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m︱Height above floor 7,7 m︱
          year of manufacture 1973 modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available
            Pressure 1000 t
            distance between columns 4100 mm
            stroke 1200 mm
            Distance table/ram, stroke up 2100 mm
            Table surface area 4000 x 2200 mm
            pressure of drawing cushion in t. 360 t
            Die cushion stroke in table 300 mm
            Die cushion area in table 3500 x 1600 mm
            Die cushion pressure in ram 100 t
            Die cushion stroke in ram 160 mm
            Die cushion area in ram 3250 x 1600 mm
            Ram surface 4000 x 2200 mm
            Side window 1300 mm
            Oil volume 8000 l
            Power capacity 300,0 kW
            Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m
            Height above floor 7,7 m
            Description :
            year of manufacture 1973
            modernization 2005
            with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning
            stored in dismantled condition
            Video at seller’s site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 600 25.4.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163064A · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 600 25.4.1 - - 2005 - Siemens S 7

          Technical details
          Pressure 600 t︱distance between columns 2600 mm︱stroke 900 mm︱Distance table/ram, max. stroke up, adjustment up 1600 mm︱Table surface area 2500 x 1730 mm︱pressure of drawing cushion in table 250 t︱Die cushion stroke in table 400 mm︱Die cushion area in table 2300 x 1300 mm︱Die cushion pressure in ram 63 t︱Die cushion stroke in ram 160 mm︱Die cushion area in ram 1900 x 1300 mm︱Ram surface 2500 x 1730 mm︱Side window 1100 mm︱Oil volume 3500 l︱Power capacity 200,0 kW︱Weight t︱Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m︱Height above floor 6,4 m︱
          year of manufacture 1974 overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available
            Pressure 600 t
            distance between columns 2600 mm
            stroke 900 mm
            Distance table/ram, max. stroke . 1600 mm
            Table surface area 2500 x 1730 mm
            pressure of drawing cushion in t. 250 t
            Die cushion stroke in table 400 mm
            Die cushion area in table 2300 x 1300 mm
            Die cushion pressure in ram 63 t
            Die cushion stroke in ram 160 mm
            Die cushion area in ram 1900 x 1300 mm
            Ram surface 2500 x 1730 mm
            Side window 1100 mm
            Oil volume 3500 l
            Power capacity 200,0 kW
            Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m
            Height above floor 6,4 m
            Description :
            year of manufacture 1974
            overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz
            with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning
            stored in dismantled condition - Video at seller’s site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER BZE 800-25.3.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163063A · Double Column Drawing Press -Hydr.

          MÜLLER - BZE 800-25.3.1 - - 2005 - Siemens S 7

          Technical details
          Pressure 800 t︱distance between columns 2560 mm︱stroke 1050 mm︱Distance table/ram, stroke up 1870 mm︱Table surface area 2500 x 1730 mm︱pressure of drawing cushion in table 300 t︱Die cushion stroke in table 395 mm︱Die cushion area in table 2300 x 1300 mm︱Ram surface 2500 x 1730 mm︱Die cushion pressure in ram 63 t︱Die cushion stroke in ram 150 mm︱Side window 1000 mm︱Oil volume 4300 l︱Power capacity 200,0 kW︱Weight t︱Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m︱Height above floor 7,0 m︱
          year of manufacture 1974 overhaul 2005 mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available
            Pressure 800 t
            distance between columns 2560 mm
            stroke 1050 mm
            Distance table/ram, stroke up 1870 mm
            Table surface area 2500 x 1730 mm
            pressure of drawing cushion in t. 300 t
            Die cushion stroke in table 395 mm
            Die cushion area in table 2300 x 1300 mm
            Ram surface 2500 x 1730 mm
            Die cushion pressure in ram 63 t
            Die cushion stroke in ram 150 mm
            Side window 1000 mm
            Oil volume 4300 l
            Power capacity 200,0 kW
            Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m
            Height above floor 7,0 m
            Description :
            year of manufacture 1974
            overhaul 2005
            mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel
            stored in dismantled condition - Video at seller’s site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 800-35.2.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163069A · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-35.2.1 - - 1998 - konventionell

          Technical details
          Pressure 800 t︱distance between columns 3550 mm︱stroke 1100 mm︱Distance table/ram, max. stroke up, adjustment up 1900 mm︱Table surface area 3500 x 1800 mm︱pressure of drawing cushion in table 350 t︱Die cushion stroke in table 280 mm︱Die cushion pressure in ram 80 t︱Die cushion stroke in ram 160 mm︱Ram surface 3500 x 1800 mm︱Side window 1900 mm︱Power capacity kW︱Weight 100,0 t︱Floor Space (WxD) 5,3 x 4,3 m︱Height above floor 7,3 m︱Height below floor 5,0 - 6,0 m︱
          year of manufacture 1970 overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available
            Pressure 800 t
            distance between columns 3550 mm
            stroke 1100 mm
            Distance table/ram, max. stroke . 1900 mm
            Table surface area 3500 x 1800 mm
            pressure of drawing cushion in t. 350 t
            Die cushion stroke in table 280 mm
            Die cushion pressure in ram 80 t
            Die cushion stroke in ram 160 mm
            Ram surface 3500 x 1800 mm
            Side window 1900 mm
            Weight 100,0 t
            Floor Space (WxD) 5,3 x 4,3 m
            Height above floor 7,3 m
            Height below floor 5,0 - 6,0 m
            Description :
            year of manufacture 1970
            overhaul 1998
            with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table)
            Height beneath floor approx. 5 - 6 m
            stored in dismantled condition - Video at seller’s site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 1500.50.4.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-203030V · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 1500.50.4.1 - - 1993 - konventionell

          Technical details
          Pressure 1500 t︱distance between columns 5050 mm︱stroke 1100 mm︱Distance table/ram, stroke up 2300 mm︱Table surface area 5000 x 2700 mm︱pressure of drawing cushion in table 320 t︱Die cushion stroke in table 300 mm︱Die cushion area in table 4300 x 1830 mm︱Die cushion pressure in ram 120 t︱Die cushion stroke in ram 200 mm︱Die cushion area in ram 3410 x 1650 mm︱Ram surface 5000 x 2400 mm︱Speed down 360 mm/s︱Speed up 168 - 505 mm/s︱Working speed 19 - 86 mm/s︱Oil volume 10500 l︱Power capacity 450,0 kW︱Weight 400,0 t︱Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m︱Height above floor 8,21 m︱
          year of manufacture 1983 overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning, controllabel dependant on pressure/time and way machine can be inspected under power as is where is, WITHOUT dismantling, WITHOUT loading
            Pressure 1500 t
            distance between columns 5050 mm
            stroke 1100 mm
            Distance table/ram, stroke up 2300 mm
            Table surface area 5000 x 2700 mm
            pressure of drawing cushion in t. 320 t
            Die cushion stroke in table 300 mm
            Die cushion area in table 4300 x 1830 mm
            Die cushion pressure in ram 120 t
            Die cushion stroke in ram 200 mm
            Die cushion area in ram 3410 x 1650 mm
            Ram surface 5000 x 2400 mm
            Speed down 360 mm/s
            Speed up 168 - 505 mm/s
            Working speed 19 - 86 mm/s
            Oil volume 10500 l
            Power capacity 450,0 kW
            Weight 400,0 t
            Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m
            Height above floor 8,21 m
            Description :
            year of manufacture 1983
            overhaul 1993
            with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning, controllabel dependant on pressure/time and way
            machine can be inspected under power
            as is where is, WITHOUT dismantling, WITHOUT loading


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER KEZ 315-16/6.5.1 (UVV)


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-15647 · Double Column Drawing Press -Hydr.

          MÜLLER - KEZ 315-16/6.5.1 (UVV) - - 1983 -

          Technical details
          pressure 315 t︱distance between columns 1620 mm︱stroke 600 mm︱distance table/ram, max. stroke up, adjustment up 1000 mm︱table surface area 1600 x 1100 mm︱pressure of drawing cushion in ram 20 t︱stroke of drawing cushion in ram 100 mm︱drawing cushion surface in pusher 300 x 300 mm︱side window 600 x 1100 mm︱table height over floor 750 mm︱ram surface 1600 x 1100 mm︱oil volume 1500 l︱height over floor 5,05 mm︱height over floor 0,45 mm︱power requirement 110 kW︱weight 35,0 t︱dimensions (WxDxH) 4,65 x 2,61 x 5,50 m︱
          unser Listenpreis versteht sich inklusive Inbetriebnahme der Maschine in unserem Lager, sowie Demonstration der Lauffunktionen ohne Werkzeug, im Übrigen wie die Presse steht und liegt, frei LKW verladen mit ölhydr. Antrieb, hydr. und elektr. Steuerung nach UVV, KEIN! Ziehkissen im Tisch, hydr. Ziehkissen im Stößel, obere und untere Hubbegrenzung, druck-, zeit- und wegabhängig steuerbar, pneum. Stößelverriegelung, hydr. Schnittschlagdämpfung, Zweihandbedienung, Schaltschrank
            pressure 315 t
            distance between columns 1620 mm
            stroke 600 mm
            distance table/ram, max. stroke . 1000 mm
            table surface area 1600 x 1100 mm
            pressure of drawing cushion in r. 20 t
            stroke of drawing cushion in ram 100 mm
            drawing cushion surface in pushe. 300 x 300 mm
            side window 600 x 1100 mm
            table height over floor 750 mm
            ram surface 1600 x 1100 mm
            oil volume 1500 l
            height over floor 5,05 mm
            height over floor 0,45 mm
            power requirement 110 kW
            weight 35,0 t
            dimensions (WxDxH) 4,65 x 2,61 x 5,50 m
            Description :
            unser Listenpreis versteht sich inklusive Inbetriebnahme der Maschine in unserem Lager, sowie Demonstration der Lauffunktionen ohne Werkzeug, im Übrigen wie die Presse steht und liegt, frei LKW verladen
            mit ölhydr. Antrieb, hydr. und elektr. Steuerung nach UVV, KEIN! Ziehkissen im Tisch, hydr. Ziehkissen im Stößel, obere und untere Hubbegrenzung, druck-, zeit- und wegabhängig steuerbar, pneum. Stößelverriegelung, hydr. Schnittschlagdämpfung, Zweihandbedienung, Schaltschrank


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 600 25.4.2


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17171 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 600 25.4.2 - - 1974 -

          Technical details
          pressure 600 t︱distance between columns 2600 mm︱stroke 900 mm︱distance table/blankh.,max. stroke up,adjustm. up 1600 mm︱table surface area 2500 x 1730 mm︱die-cushion pressure inside the table 250 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 63 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 2500 x 1730 mm︱column travel -side 1100 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          overhauled in 2005
            pressure 600 t
            distance between columns 2600 mm
            stroke 900 mm
            distance table/blankh.,max. stro. 1600 mm
            table surface area 2500 x 1730 mm
            die-cushion pressure inside the . 250 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 63 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 2500 x 1730 mm
            column travel -side 1100 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Description :
            overhauled in 2005


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 600 25.4.3


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17172 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 600 25.4.3 - - 1974 -

          Technical details
          pressure 600 t︱distance between columns 2600 mm︱stroke 900 mm︱distance table/blankh.,max. stroke up,adjustm. up 1600 mm︱table surface area 2500 x 1730 mm︱die-cushion pressure inside the table 250 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 63 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 2500 x 1730 mm︱column travel -side 1100 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          overhauled in 2005
            pressure 600 t
            distance between columns 2600 mm
            stroke 900 mm
            distance table/blankh.,max. stro. 1600 mm
            table surface area 2500 x 1730 mm
            die-cushion pressure inside the . 250 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 63 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 2500 x 1730 mm
            column travel -side 1100 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Description :
            overhauled in 2005


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 600 25.4.4


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17173 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 600 25.4.4 - - 1974 -

          Technical details
          pressure 600 t︱distance between columns 2600 mm︱stroke 900 mm︱distance table/blankh.,max. stroke up,adjustm. up 1600 mm︱table surface area 2500 x 1730 mm︱die-cushion pressure inside the table 250 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 63 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 2500 x 1730 mm︱column travel -side 1100 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          overhauled in 2005
            pressure 600 t
            distance between columns 2600 mm
            stroke 900 mm
            distance table/blankh.,max. stro. 1600 mm
            table surface area 2500 x 1730 mm
            die-cushion pressure inside the . 250 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 63 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 2500 x 1730 mm
            column travel -side 1100 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Description :
            overhauled in 2005


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 1000-40.3.2


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17159 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 1000-40.3.2 - - 1973 - Siemens S7

          Technical details
          pressure 1000 t︱distance between columns 4150 mm︱stroke 1200 mm︱distance table/blankh.,max. stroke up,adjustm. up 2100 mm︱table surface area 4000 x 2200 mm︱die-cushion pressure inside the table 360 t︱stroke of drawing cushion in table 300 mm︱die-cushion pressure in pusher 100 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 4000 x 2200 mm︱column travel -side 1300 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱Cut Shock absorption hydraulic ︱Control Siemens S7 ︱height over floor 7,7 m︱total power requirement 300 kW︱weight of the machine ca. 280 t︱dimensions of the machine ca. 5,75 x 4,3 x 9,55 m︱
          Year of construction 1973 Modernization 2005 with oil-hydraulic drive, hydraulically controlled drawing cushion in the table and Ram, hydraulic cutting impact damping stored dismantled - short video available from the seller before dismantling
            pressure 1000 t
            distance between columns 4150 mm
            stroke 1200 mm
            distance table/blankh.,max. stro. 2100 mm
            table surface area 4000 x 2200 mm
            die-cushion pressure inside the . 360 t
            stroke of drawing cushion in tab. 300 mm
            die-cushion pressure in pusher 100 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 4000 x 2200 mm
            column travel -side 1300 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Cut Shock absorption hydraulic
            Control Siemens S7
            height over floor 7,7 m
            total power requirement 300 kW
            weight of the machine ca. 280 t
            dimensions of the machine ca. 5,75 x 4,3 x 9,55 m
            Description :
            Year of construction 1973
            Modernization 2005
            with oil-hydraulic drive, hydraulically controlled drawing cushion in the table
            and
            Ram, hydraulic cutting impact damping
            stored dismantled - short video available from the seller before dismantling


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 1000-40.3.3


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17160 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 1000-40.3.3 - - 1973 -

          Technical details
          pressure 1000 t︱distance between columns 4150 mm︱stroke 1200 mm︱distance table/blankh.,max. stroke up,adjustm. up 2100 mm︱table surface area 4000 x 2200 mm︱die-cushion pressure inside the table 360 t︱stroke of drawing cushion in table 300 mm︱die-cushion pressure in pusher 100 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 4000 x 2200 mm︱column travel -side 1300 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱Cut Shock absorption hydraulic ︱total power requirement kW︱weight of the machine ca. 280 t︱dimensions of the machine ca. m︱
          The machine was overtaken 1999.
            pressure 1000 t
            distance between columns 4150 mm
            stroke 1200 mm
            distance table/blankh.,max. stro. 2100 mm
            table surface area 4000 x 2200 mm
            die-cushion pressure inside the . 360 t
            stroke of drawing cushion in tab. 300 mm
            die-cushion pressure in pusher 100 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 4000 x 2200 mm
            column travel -side 1300 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Cut Shock absorption hydraulic
            weight of the machine ca. 280 t
            Description :
            The machine was overtaken 1999.


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 1000-40.3.5


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17162 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 1000-40.3.5 - - 1973 -

          Technical details
          pressure 1000 t︱distance between columns 4150 mm︱stroke 1200 mm︱distance table/blankh.,max. stroke up,adjustm. up 2100 mm︱table surface area 4000 x 2200 mm︱die-cushion pressure inside the table 360 t︱stroke of drawing cushion in table 300 mm︱die-cushion pressure in pusher 100 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 4000 x 2200 mm︱column travel -side 1300 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱Cut Shock absorption hydraulic ︱total power requirement kW︱weight of the machine ca. 280 t︱dimensions of the machine ca. m︱
          The machine was overtaken 1999.
            pressure 1000 t
            distance between columns 4150 mm
            stroke 1200 mm
            distance table/blankh.,max. stro. 2100 mm
            table surface area 4000 x 2200 mm
            die-cushion pressure inside the . 360 t
            stroke of drawing cushion in tab. 300 mm
            die-cushion pressure in pusher 100 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 4000 x 2200 mm
            column travel -side 1300 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Cut Shock absorption hydraulic
            weight of the machine ca. 280 t
            Description :
            The machine was overtaken 1999.


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER BZE 1600-40.7.1


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17163 · Double Column Drawing Press -Hydr.

          MÜLLER - BZE 1600-40.7.1 - - 1973 -

          Technical details
          pressure 1600 t︱distance between columns 3160 mm︱ram stroke 1450 mm︱distance table/blankh.,max. stroke up,adjustm. up 2250 mm︱table surface area 4000 x 2200 mm︱ram pressure 1000 t︱pressure of blank holder 600 t︱stroke of blankholder at the bottom 1000 mm︱stroke of blankholder with adjustment 0-100 mm 1450 mm︱blank holder size 4000 x 2200 mm︱die-cushion pressure inside the table 360 t︱stroke of drawing cushion in table 275 / 400 mm︱ram surface 4000 x 2200 mm︱column travel -side 1100 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱oil volume 9000 l︱total power requirement 390 kW︱weight of the machine ca. 250 t︱dimensions of the machine ca. 6,0 x 4,3 x 10,5 m︱
          Head press (1600 tons) of a press line with five subsequent presses (800 tons)
            pressure 1600 t
            distance between columns 3160 mm
            ram stroke 1450 mm
            distance table/blankh.,max. stro. 2250 mm
            table surface area 4000 x 2200 mm
            ram pressure 1000 t
            pressure of blank holder 600 t
            stroke of blankholder at the bot. 1000 mm
            stroke of blankholder with adjus. 1450 mm
            blank holder size 4000 x 2200 mm
            die-cushion pressure inside the . 360 t
            stroke of drawing cushion in tab. 275 / 400 mm
            ram surface 4000 x 2200 mm
            column travel -side 1100 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            oil volume 9000 l
            total power requirement 390 kW
            weight of the machine ca. 250 t
            dimensions of the machine ca. 6,0 x 4,3 x 10,5 m
            Description :
            Head press (1600 tons) of a press line with five subsequent presses (800 tons)


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER BZE 1600-40.7.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163057A · Double Column Drawing Press -Hydr.

          MÜLLER - BZE 1600-40.7.1 - - 1973 - Siemens S 5

          Technical details
          Pressure 1600 t︱distance between columns 4100 mm︱slide stroke 1450 mm︱Distance table/ram, stroke up 2750 mm︱distance table/blank holder, stroke up 2200 ︱Table surface area 4000 x 2200 mm︱ram pressure 1000 t︱Pressure of blank holder 600 t︱stroke of blankholder 1000 mm︱blank holder surface 4050 x 2200 mm︱Ram surface 3200 x 1650 mm︱pressure of drawing cushion in table 360 t︱Die cushion stroke in table 300 mm︱die cushion area 3500 x 1600 mm︱Side window 1100 mm︱Oil volume 9000 l︱Power capacity 390,0 kW︱Weight 250,0 t︱Dimensions (WxDxH) 5,95 x 4,3 x 10,5 m︱Height above floor 8,6 m︱
          with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram stored in dismantled condition - Video at seller’s site before dismantling available
            Pressure 1600 t
            distance between columns 4100 mm
            slide stroke 1450 mm
            Distance table/ram, stroke up 2750 mm
            distance table/blank holder, str. 2200
            Table surface area 4000 x 2200 mm
            ram pressure 1000 t
            Pressure of blank holder 600 t
            stroke of blankholder 1000 mm
            blank holder surface 4050 x 2200 mm
            Ram surface 3200 x 1650 mm
            pressure of drawing cushion in t. 360 t
            Die cushion stroke in table 300 mm
            die cushion area 3500 x 1600 mm
            Side window 1100 mm
            Oil volume 9000 l
            Power capacity 390,0 kW
            Weight 250,0 t
            Dimensions (WxDxH) 5,95 x 4,3 x 10,5 m
            Height above floor 8,6 m
            Description :
            with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram
            stored in dismantled condition - Video at seller’s site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.5


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17168 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-31.1.5 - - 1972 - Siemens S5

          Technical details
          pressure 800 t︱distance between columns 3160 mm︱stroke 1100 mm︱control Siemens S5 ︱distance table/blankh.,max. stroke up,adjustm. up 1900 mm︱table surface area 3100 x 1900 mm︱die-cushion pressure inside the table 300 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 80 t︱stroke of drawing cushion in table 150 mm︱ram surface 3100 x 1900 mm︱die-cushion in pusher hydraulic, controlled ︱die-cushion inside the table hydraulic, controlled ︱total power requirement 200 kW︱weight of the machine ca. 150 t︱dimensions of the machine ca. 4,95 x 3,3 x 10,2 m︱
            pressure 800 t
            distance between columns 3160 mm
            stroke 1100 mm
            control Siemens S5
            distance table/blankh.,max. stro. 1900 mm
            table surface area 3100 x 1900 mm
            die-cushion pressure inside the . 300 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 80 t
            stroke of drawing cushion in tab. 150 mm
            ram surface 3100 x 1900 mm
            die-cushion in pusher hydraulic, controlled
            die-cushion inside the table hydraulic, controlled
            total power requirement 200 kW
            weight of the machine ca. 150 t
            dimensions of the machine ca. 4,95 x 3,3 x 10,2 m


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.1


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17164 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-31.1.1 - - 1972 -

          Technical details
          pressure 800 t︱distance between columns 3160 mm︱stroke 1100 mm︱distance table/blankh.,max. stroke up,adjustm. up 1900 mm︱table surface area 3100 x 1900 mm︱die-cushion pressure inside the table 300 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 80 t︱stroke of drawing cushion in table 150 mm︱ram surface 3100 x 1900 mm︱die-cushion in pusher hydraulic, controlled ︱die-cushion inside the table hydraulic, controlled ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            pressure 800 t
            distance between columns 3160 mm
            stroke 1100 mm
            distance table/blankh.,max. stro. 1900 mm
            table surface area 3100 x 1900 mm
            die-cushion pressure inside the . 300 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 80 t
            stroke of drawing cushion in tab. 150 mm
            ram surface 3100 x 1900 mm
            die-cushion in pusher hydraulic, controlled
            die-cushion inside the table hydraulic, controlled


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.2


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17165 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-31.1.2 - - 1972 - Siemens S5

          Technical details
          pressure 800 t︱distance between columns 3160 mm︱stroke 1100 mm︱control Siemens S5 ︱distance table/blankh.,max. stroke up,adjustm. up 1900 mm︱table surface area 3100 x 1900 mm︱die-cushion pressure inside the table 300 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 80 t︱stroke of drawing cushion in table 150 mm︱ram surface 3100 x 1900 mm︱die-cushion in pusher hydraulic, controlled ︱die-cushion inside the table hydraulic, controlled ︱total power requirement 200 kW︱weight of the machine ca. 150 t︱dimensions of the machine ca. 4,95 x 3,3 x 10,2 m︱
            pressure 800 t
            distance between columns 3160 mm
            stroke 1100 mm
            control Siemens S5
            distance table/blankh.,max. stro. 1900 mm
            table surface area 3100 x 1900 mm
            die-cushion pressure inside the . 300 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 80 t
            stroke of drawing cushion in tab. 150 mm
            ram surface 3100 x 1900 mm
            die-cushion in pusher hydraulic, controlled
            die-cushion inside the table hydraulic, controlled
            total power requirement 200 kW
            weight of the machine ca. 150 t
            dimensions of the machine ca. 4,95 x 3,3 x 10,2 m


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.3


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17166 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-31.1.3 - - 1972 - Siemens S5

          Technical details
          pressure 800 t︱distance between columns 3160 mm︱stroke 1100 mm︱control Siemens S5 ︱distance table/blankh.,max. stroke up,adjustm. up 1900 mm︱table surface area 3100 x 1900 mm︱die-cushion pressure inside the table 300 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 80 t︱stroke of drawing cushion in table 150 mm︱ram surface 3100 x 1900 mm︱die-cushion in pusher hydraulic, controlled ︱die-cushion inside the table hydraulic, controlled ︱total power requirement 200 kW︱weight of the machine ca. 150 t︱dimensions of the machine ca. 4,95 x 3,3 x 10,2 m︱
            pressure 800 t
            distance between columns 3160 mm
            stroke 1100 mm
            control Siemens S5
            distance table/blankh.,max. stro. 1900 mm
            table surface area 3100 x 1900 mm
            die-cushion pressure inside the . 300 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 80 t
            stroke of drawing cushion in tab. 150 mm
            ram surface 3100 x 1900 mm
            die-cushion in pusher hydraulic, controlled
            die-cushion inside the table hydraulic, controlled
            total power requirement 200 kW
            weight of the machine ca. 150 t
            dimensions of the machine ca. 4,95 x 3,3 x 10,2 m


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.4


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17167 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-31.1.4 - - 1972 - Siemens S5

          Technical details
          pressure 800 t︱distance between columns 3160 mm︱stroke 1100 mm︱control Siemens S5 ︱distance table/blankh.,max. stroke up,adjustm. up 1900 mm︱table surface area 3100 x 1900 mm︱die-cushion pressure inside the table 300 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 80 t︱stroke of drawing cushion in table 150 mm︱ram surface 3100 x 1900 mm︱die-cushion in pusher hydraulic, controlled ︱die-cushion inside the table hydraulic, controlled ︱total power requirement 200 kW︱weight of the machine ca. 150 t︱dimensions of the machine ca. 4,95 x 3,3 x 10,2 m︱
            pressure 800 t
            distance between columns 3160 mm
            stroke 1100 mm
            control Siemens S5
            distance table/blankh.,max. stro. 1900 mm
            table surface area 3100 x 1900 mm
            die-cushion pressure inside the . 300 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 80 t
            stroke of drawing cushion in tab. 150 mm
            ram surface 3100 x 1900 mm
            die-cushion in pusher hydraulic, controlled
            die-cushion inside the table hydraulic, controlled
            total power requirement 200 kW
            weight of the machine ca. 150 t
            dimensions of the machine ca. 4,95 x 3,3 x 10,2 m


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163058A · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-31.1.1 - - 1972 - Siemens S 5

          Technical details
          Pressure 800 t︱distance between columns 3250 mm︱stroke 1100 mm︱Distance table/ram, stroke up 1900 mm︱Table surface area 3100 x 1900 mm︱pressure of drawing cushion in table 300 t︱Die cushion stroke in table 300 mm︱Die cushion area in table 2500 x 1800 mm︱Die cushion pressure in ram 80 t︱Die cushion stroke in ram 200 mm︱Die cushion area in ram 2200 x 1000 mm︱Ram surface 3100 x 1900 mm︱Side window 900 mm︱Oil volume 4700 l︱Power capacity 200,0 kW︱Weight t︱Dimensions (WxDxH) 4,95 x 3,3 x 10,2 m︱Height above floor 7,05 m︱
          with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available
            Pressure 800 t
            distance between columns 3250 mm
            stroke 1100 mm
            Distance table/ram, stroke up 1900 mm
            Table surface area 3100 x 1900 mm
            pressure of drawing cushion in t. 300 t
            Die cushion stroke in table 300 mm
            Die cushion area in table 2500 x 1800 mm
            Die cushion pressure in ram 80 t
            Die cushion stroke in ram 200 mm
            Die cushion area in ram 2200 x 1000 mm
            Ram surface 3100 x 1900 mm
            Side window 900 mm
            Oil volume 4700 l
            Power capacity 200,0 kW
            Dimensions (WxDxH) 4,95 x 3,3 x 10,2 m
            Height above floor 7,05 m
            Description :
            with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning
            stored in dismantled condition - Video at seller’s site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •