,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Bandsaw - Horizontal

          Machinelist: Bandsaw - Horizontal


          Bandsaw - Horizontal

          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 218 Eco AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66202 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 218 Eco AutoCut - - -NEU- -

          Technical details
          cutting diameter 220 mm︱saw band length 2455 mm︱table height 850 mm︱cutting width 230 mm︱cutting speed 35 + 70 m/min︱dimensions of saw-band 2455 x 27 x 0,9 mm︱ 90 mm︱ 90 mm︱ 90 x 100 mm︱ 150 ︱Impact energy 150 ︱Air consume per blow 150 x 210220 mm︱stroke back stop 210 mm︱cross-slide 230 x 185 ︱total power requirement 1,2 kW︱weight of the machine ca. 0,24 t︱dimensions of the machine ca. 1,2 x 0,6 x 1,7 m︱
          SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR
            cutting diameter 220 mm
            saw band length 2455 mm
            table height 850 mm
            cutting width 230 mm
            cutting speed 35 + 70 m/min
            dimensions of saw-band 2455 x 27 x 0,9 mm
            90 mm
            90 mm
            90 x 100 mm
            150
            Impact energy 150
            Air consume per blow 150 x 210
            220 mm
            stroke back stop 210 mm
            cross-slide 230 x 185
            total power requirement 1,2 kW
            weight of the machine ca. 0,24 t
            dimensions of the machine ca. 1,2 x 0,6 x 1,7 m
            Description :
            SPECIAL PRICE!!!
            -Miter cuts up to 60° left
            -Cutting speed 35 / 70 m / min.
            - Vice with quick release device
            -Carbide saw band guide
            -Tape tension control
            -Electr. automatic cooling

            Auto-Cut-System = 3 step system
            -Automatic saw frame lowering via the hydraulic cylinder
            -Infinitely adjustable feed
            -with limit switch
            - rapid lowering of the saw frame from the rest position to the workpiece,
            then switch to normal saw feed
            -Manual mode

            Share of freight costs 85 EUR


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 242 DG HA-I


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66211 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 242 DG HA-I - - -Neu- -

          Technical details
          capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 210 mm︱ 290 x 210 mm︱saw band length 2.965 x 27 x 0,9 mm mm︱table height 940 mm︱band speed 35 / 70 m/min︱total power requirement 1,1/1,3 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 1,3 x 0,8 x 1,5 m︱
          SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 210 mm
            290 x 210 mm
            saw band length 2.965 x 27 x 0,9 mm mm
            table height 940 mm
            band speed 35 / 70 m/min
            total power requirement 1,1/1,3 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 1,3 x 0,8 x 1,5 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw hydraulic semi-automatic with:
            - Hydraulic vice
            - Material height button
            - Cut monitoring by ammeter
            - Cutting pressure feed regulator

            - Belt speed 34 / 74 m/min
            - Miter cuts up to 60° left and 45° right
            - Patented, ball-bearing turntable for easy miter adjustment
            - Adjustable quick-release vise
            - Quick release lever
            - Automatic cooling
            Share of freight costs 120 EUR


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID X-tech 900


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66255 · Bandsaw - Horizontal

          BERG & SCHMID - X-tech 900 - - -neu- -

          Technical details
          900 mm︱ 900 mm︱ 900x900 mm︱saw band length 9300 x 67 x 1,1 mm︱table height 790 mm︱band speed 14 - 60 m/min︱total power requirement 11 kW︱weight of the machine ca. 8,45 t︱dimensions 4,485 x 1,68 x 3,15 m︱
          The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.
            900 mm
            900 mm
            900x900 mm
            saw band length 9300 x 67 x 1,1 mm
            table height 790 mm
            band speed 14 - 60 m/min
            total power requirement 11 kW
            weight of the machine ca. 8,45 t
            dimensions 4,485 x 1,68 x 3,15 m
            Description :
            The semi-automatic, hydraulic saws from the X-tech line offer the best
            Saw technology and best performance when cutting special steels
            • The electro-welded machine frame and the steel saw frame meet requirements
            all cutting needs and eliminate vibration and noise.
            • The chip conveyor is hydraulically driven and the speed is
            adjustable
            • All movements of the machine (saw frame, vice, feed,
            Saw band guides) are carried out thanks to modern linear guides with high
            static and dynamic load performance, which also has very low sliding friction
            to guarantee.
            • Another characteristic feature is the roles for the
            Positioning of the material by a hydraulic motor
            are driven. They move at right angles to the material, and
            thus allowing optimal clamping of the material.
            • Thanks to the height control of the saw band position, the operator can place
            the band in
            place near the top edge of the material. After the cut is finished, the tape
            automatically raised back to the previous position. Alternatively you can
            also
            “Remain” can be selected in the lower position. During the
            The software compares the cutting load with the cutting cycle
            Default. This means that the sawing system can be stopped in the event of
            irregularities
            become.
            • The saw band is cleaned by two adjustable steel brushes. The drive
            takes place hydraulically.
            • The hydraulic unit including filter and pressure gauge guarantees one
            particularly quiet operation at constant pressure.
            • Finely ground carbide inserts that clamp the saw blade, complete with
            lateral, hardened and adjustable guide rollers. The adjustable one
            The tape guide automatically moves as close as possible to the material.
            • The saw band is tensioned via a hydraulic cylinder, which is carried out by
            the
            Machine software is controlled. The voltage is set according to a given
            Time automatically delimbed when the machine is idle or after
            a cycle has been carried out.
            • Automatic version with CNC control in the X-TECH 900 / 1200 models
            a feed length of 500 mm for the series for high production rates.
            • The material is carried by a table with seven rollers. These will
            driven by a hydraulic orbital motor through which the material
            can be placed precisely even under maximum load.
            • All guided movements are carried out by four recirculating ball guides with
            one
            high capacity for static and dynamic loading; strong
            reduced feed friction. Tempered and ground prismatic
            Guides.
            Price on request.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID X-Rock 1250


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66256 · Bandsaw - Horizontal

          BERG & SCHMID - X-Rock 1250 - - -neu- -

          Technical details
          1000 mm︱ 1000 mm︱ 1200x1000 mm︱saw band length 11300 x 80 x 1,3 mm︱table height 790 mm︱band speed 14 - 60 m/min︱total power requirement 18 kW︱weight of the machine ca. 9,0 t︱dimensions 5,0 x 1,68 x 3,15 m︱
          The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.
            1000 mm
            1000 mm
            1200x1000 mm
            saw band length 11300 x 80 x 1,3 mm
            table height 790 mm
            band speed 14 - 60 m/min
            total power requirement 18 kW
            weight of the machine ca. 9,0 t
            dimensions 5,0 x 1,68 x 3,15 m
            Description :
            The semi-automatic, hydraulic saws from the X-tech line offer the best
            Saw technology and best performance when cutting special steels
            • The electro-welded machine frame and the steel saw frame meet requirements
            all cutting needs and eliminate vibration and noise.
            • The chip conveyor is hydraulically driven and the speed is
            adjustable
            • All movements of the machine (saw frame, vice, feed,
            Saw band guides) are carried out thanks to modern linear guides with high
            static and dynamic load performance, which also has very low sliding friction
            to guarantee.
            • Another characteristic feature is the roles for the
            Positioning of the material by a hydraulic motor
            are driven. They move at right angles to the material, and
            thus allowing optimal clamping of the material.
            • Thanks to the height control of the saw band position, the operator can place
            the band in
            place near the top edge of the material. After the cut is finished, the tape
            automatically raised back to the previous position. Alternatively you can
            also
            “Remain” can be selected in the lower position. During the
            The software compares the cutting load with the cutting cycle
            Default. This means that the sawing system can be stopped in the event of
            irregularities
            become.
            • The saw band is cleaned by two adjustable steel brushes. The drive
            takes place hydraulically.
            • The hydraulic unit including filter and pressure gauge guarantees one
            particularly quiet operation at constant pressure.
            • Finely ground carbide inserts that clamp the saw blade, complete with
            lateral, hardened and adjustable guide rollers. The adjustable one
            The tape guide automatically moves as close as possible to the material.
            • The saw band is tensioned via a hydraulic cylinder, which is carried out by
            the
            Machine software is controlled. The voltage is set according to a given
            Time automatically delimbed when the machine is idle or after
            a cycle has been carried out.
            • Automatic version with CNC control in the X-TECH 900 / 1200 models
            a feed length of 500 mm for the series for high production rates.
            • The material is carried by a table with seven rollers. These will
            driven by a hydraulic orbital motor through which the material
            can be placed precisely even under maximum load.
            • All guided movements are carried out by four recirculating ball guides with
            one
            high capacity for static and dynamic loading; strong
            reduced feed friction. Tempered and ground prismatic
            Guides.
            Price on request.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 240 AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66204 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 240 AutoCut - - -NEU- -

          Technical details
          cutting diameter 240 mm︱dimensions of saw-band 2730 x 27 x 0,9 mm︱table height 920 mm︱cutting speed 35 + 70 m/min︱ 240 mm︱stroke back stop 230 mm︱cross-slide 270x230210 ︱Impact energy 200 ︱Air consume per blow 200x210130 mm︱ 130 mm︱ 130x160 mm︱total power requirement 1,2 kW︱weight of the machine ca. 0,26 t︱dimensions of the machine ca. 0,9 x 1,6 x 1,74 m︱
          • miter left 60° • Quick-release vise with quick-release device a. • Quick release lever for easy handling • Frame and gear made from one piece, very quiet cut and very low vibration • Electrical monitoring of band tension and band breakage, saw band cover. • Carbide saw band guide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering via the hydraulic Cylinder, continuously adjustable feed, with limit switch at the end of the cut. Rapid lowering of the saw frame from the rest position to the workpiece, then toggle to normal saw feed (e.g. for scribing). Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for notching). Through the brake cylinder the saw can be positioned in any position during the return stroke.
            cutting diameter 240 mm
            dimensions of saw-band 2730 x 27 x 0,9 mm
            table height 920 mm
            cutting speed 35 + 70 m/min
            240 mm
            stroke back stop 230 mm
            cross-slide 270x230
            210
            Impact energy 200
            Air consume per blow 200x210
            130 mm
            130 mm
            130x160 mm
            total power requirement 1,2 kW
            weight of the machine ca. 0,26 t
            dimensions of the machine ca. 0,9 x 1,6 x 1,74 m
            Description :
            • miter left 60°
            • Quick-release vise with quick-release device a.
            • Quick release lever for easy handling
            • Frame and gear made from one piece, very quiet cut and very low vibration
            • Electrical monitoring of band tension and band breakage, saw band cover.
            • Carbide saw band guide
            • Large machine bed
            • Machine base (disassembled) with automatic cooling
            The AutoCut system consists of:
            Hydraulic cylinder, feed control, spring assembly, limit switch
            Automatic saw frame lowering via the hydraulic
            Cylinder, continuously adjustable feed, with limit switch
            at the end of the cut. Rapid lowering of the saw frame
            from the rest position to the workpiece, then toggle
            to normal saw feed (e.g. for scribing).
            Manual operation: The hydraulic cylinder works as a brake cylinder
            (e.g. for notching). Through the brake cylinder
            the saw can be positioned in any position during the return stroke.




        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 242 DG HA-I


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66214 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 242 DG HA-I - - -Neu- -

          Technical details
          capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 210 mm︱ 290 x 210 mm︱saw band length 2.965 x 27 x 0,9 mm mm︱table height 940 mm︱band speed 25 - 90 m/min︱total power requirement 1,1/1,3 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 1,3 x 0,8 x 1,5 m︱
          SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 210 mm
            290 x 210 mm
            saw band length 2.965 x 27 x 0,9 mm mm
            table height 940 mm
            band speed 25 - 90 m/min
            total power requirement 1,1/1,3 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 1,3 x 0,8 x 1,5 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw hydraulic semi-automatic with:
            - Hydraulic vice
            - Material height button
            - Cut monitoring by ammeter
            - Cutting pressure feed regulator
            - Belt speed 25 - 90 m/min
            - Miter cuts up to 60° left and 45° right
            - Patented, ball-bearing turntable for easy miter adjustment
            - Adjustable quick-release vise
            - Quick release lever
            - Automatic cooling



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 242 DG AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66212 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 242 DG AutoCut - - -Neu- -

          Technical details
          capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 210 mm︱ 290 x 210 mm︱saw band length 2.965 x 27 x 0,9 mm mm︱table height 940 mm︱band speed 35 + 70 m/min︱total power requirement 1,1 / 1,3 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 1,3 x 0,8 x 1,5 m︱
          ATTENTION SPECIAL PRICE!!! Double miter metal band saw with: - Belt speed 35 + 70 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 210 mm
            290 x 210 mm
            saw band length 2.965 x 27 x 0,9 mm mm
            table height 940 mm
            band speed 35 + 70 m/min
            total power requirement 1,1 / 1,3 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 1,3 x 0,8 x 1,5 m
            Description :
            ATTENTION SPECIAL PRICE!!!
            Double miter metal band saw with:
            - Belt speed 35 + 70 m/min
            - Miter cuts up to 60° left and 45° right
            - Ball-bearing rotary table for quick miter adjustment
            - Quick-action clamping stick can be moved
            - Quick release lever
            - Automatic cooling


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 242 DG AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66213 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 242 DG AutoCut - - -Neu- -

          Technical details
          capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 210 mm︱ 290 x 210 mm︱saw band length 2.965 x 27 x 0,9 mm mm︱table height 940 mm︱band speed 25 - 90 m/min︱total power requirement 1,1 / 1,3 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 1,3 x 0,8 x 1,5 m︱
          ATTENTION SPECIAL PRICE!!! (20347) Double miter metal band saw with: - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 210 mm
            290 x 210 mm
            saw band length 2.965 x 27 x 0,9 mm mm
            table height 940 mm
            band speed 25 - 90 m/min
            total power requirement 1,1 / 1,3 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 1,3 x 0,8 x 1,5 m
            Description :
            ATTENTION SPECIAL PRICE!!! (20347)
            Double miter metal band saw with:
            - Belt speed 25 - 90 m/min
            - Miter cuts up to 60° left and 45° right
            - Ball-bearing rotary table for quick miter adjustment
            - Quick-action clamping stick can be moved
            - Quick release lever
            - Automatic cooling


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 218 Eco AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66203 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 218 Eco AutoCut - - -NEU- -

          Technical details
          cutting diameter 220 mm︱saw band length 2455 mm︱table height 850 mm︱cutting width 230 mm︱cutting speed 25 - 80 m/min︱dimensions of saw-band 2455 x 27 x 0,9 mm︱ 90 mm︱ 90 mm︱ 90 x 100 mm︱ 150 ︱Impact energy 150 ︱Air consume per blow 150 x 210220 mm︱stroke back stop 210 mm︱cross-slide 230 x 185 ︱total power requirement 1,2 kW︱weight of the machine ca. 0,24 t︱dimensions of the machine ca. 1,2 x 0,6 x 1,7 m︱
          SPECIAL PRICE!!! -Miter cuts up to 60° left - Cutting speed 25 - 80m/min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode
            cutting diameter 220 mm
            saw band length 2455 mm
            table height 850 mm
            cutting width 230 mm
            cutting speed 25 - 80 m/min
            dimensions of saw-band 2455 x 27 x 0,9 mm
            90 mm
            90 mm
            90 x 100 mm
            150
            Impact energy 150
            Air consume per blow 150 x 210
            220 mm
            stroke back stop 210 mm
            cross-slide 230 x 185
            total power requirement 1,2 kW
            weight of the machine ca. 0,24 t
            dimensions of the machine ca. 1,2 x 0,6 x 1,7 m
            Description :
            SPECIAL PRICE!!!
            -Miter cuts up to 60° left
            - Cutting speed 25 - 80m/min.
            - Vice with quick release device
            -Carbide saw band guide
            -Tape tension control
            -Electr. automatic cooling

            Auto-Cut-System = 3 step system
            -Automatic saw frame lowering via the hydraulic cylinder
            -Infinitely adjustable feed
            -with limit switch
            - rapid lowering of the saw frame from the rest position to the workpiece,
            then switch to normal saw feed
            -Manual mode




        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 310/400 HA-I Easy


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66224 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 310/400 HA-I Easy - - - neu - -

          Technical details
          capacity 90 degrees: round 310 mm︱capacity 90 degrees: square 280 mm︱ 400x250 ︱saw band length 4020x34x1,1 mm︱band speed 37 + 74 m/min︱table height 940 mm︱total power requirement 1,8/2,2 kW︱weight of the machine ca. 0,68 t︱dimensions of the machine ca. 1,5 x 1,78 x 1,3 m︱
          ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise
            capacity 90 degrees: round 310 mm
            capacity 90 degrees: square 280 mm
            400x250
            saw band length 4020x34x1,1 mm
            band speed 37 + 74 m/min
            table height 940 mm
            total power requirement 1,8/2,2 kW
            weight of the machine ca. 0,68 t
            dimensions of the machine ca. 1,5 x 1,78 x 1,3 m
            Description :
            ACTION PRICE !!!
            Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy
            • miter left 60° + right 45°
            • Industrial hydraulics, powerful 18 bar
            • Best access to the material
            • Ammeter to check a.
            - Optimization of cutting force
            - Tape life
            - cutting course
            • Vise closes/opens hydraulically
            • Chip removal brush
            • Material turntable with ball bearings b.
            • Adjustable quick-release c.
            • Material height sensor (automatic cut start detection)
            Semi-automatic function:
            1. Clamp material
            2. Saw starts
            3. Rapid lowering to the start of the material or the same for series cutting
            cut
            4. Saw band off
            5. Raise the frame to just above the material
            6. Open the vise


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 305 AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66225 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 305 AutoCut - - - neu - -

          Technical details
          capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350 x 200 ︱saw band length 3375 x 27 x 0,9 mm︱band speed 37 + 74 m/min︱table height 940 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,61 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱
          Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.
            capacity 90 degrees: round 305 mm
            capacity 90 degrees: square 260 mm
            350 x 200
            saw band length 3375 x 27 x 0,9 mm
            band speed 37 + 74 m/min
            table height 940 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,61 t
            dimensions of the machine ca. 1,5 x 1,75 x 1,9 m
            Description :
            Double miter metal band saw with AutoCut function
            - Miter cuts up to 60° left and 45° right
            - Ball bearing turntable
            - Vice can be moved sideways
            - Massive, large material support
            - Automatic cooling

            Figure is semi-automatic.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 185 Eco AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66207 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 185 Eco AutoCut - - - neu - -

          Technical details
          cutting diameter 185 mm︱saw band length 2.085 x 20 x 0,90 mm︱table height 920 mm︱band speed 30 - 80 m/min︱connected load frequency 400 V︱total power requirement 2,5 kW︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 870 x 1.550 x 1.740 mm mm︱
          ACTION PRICE !!! Berg & Schmid - Metal band saw GBS 185 Eco AutoCut Order no. 20332 Extremely fast and quiet sawing thanks to improved drive technology - Miter cuts up to 60° left - Suitable for dry and wet cutting - Saw band speed 30 - 80 m/min. - Cooling device - Machine base
            cutting diameter 185 mm
            saw band length 2.085 x 20 x 0,90 mm
            table height 920 mm
            band speed 30 - 80 m/min
            connected load frequency 400 V
            total power requirement 2,5 kW
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 870 x 1.550 x 1.740 mm mm
            Description :
            ACTION PRICE !!!
            Berg & Schmid - Metal band saw GBS 185 Eco AutoCut Order no. 20332
            Extremely fast and quiet sawing thanks to improved drive technology
            - Miter cuts up to 60° left
            - Suitable for dry and wet cutting
            - Saw band speed 30 - 80 m/min.
            - Cooling device
            - Machine base




        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 305 AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66227 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 305 AutoCut - - - neu - -

          Technical details
          capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350 x 200 ︱saw band length 3375 x 27 x 0,9 mm︱band speed 18 - 110 m/min︱table height 940 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,61 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱
          Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.
            capacity 90 degrees: round 305 mm
            capacity 90 degrees: square 260 mm
            350 x 200
            saw band length 3375 x 27 x 0,9 mm
            band speed 18 - 110 m/min
            table height 940 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,61 t
            dimensions of the machine ca. 1,5 x 1,75 x 1,9 m
            Description :
            Double miter metal band saw with AutoCut function
            - Miter cuts up to 60° left and 45° right
            - Ball bearing turntable
            - Vice can be moved sideways
            - Massive, large material support
            - Automatic cooling

            Figure is semi-automatic.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 250 Super AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66215 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 250 Super AutoCut - - - neu - -

          Technical details
          capacity 90 degrees: round 255 mm︱capacity 90 degrees: square 240 mm︱ 300 x 180 ︱saw band length 2.765 x 27 x 0,9 mm mm︱table height 950 mm︱band speed 35 + 70 m/min︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,42 t︱dimensions of the machine ca. 1,23 x 1,7 x 1,75 m︱
          SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling
            capacity 90 degrees: round 255 mm
            capacity 90 degrees: square 240 mm
            300 x 180
            saw band length 2.765 x 27 x 0,9 mm mm
            table height 950 mm
            band speed 35 + 70 m/min
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,42 t
            dimensions of the machine ca. 1,23 x 1,7 x 1,75 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw hydraulic semi-automatic with:
            - Hydraulic vice
            - Material height button
            - Cut monitoring by ammeter
            - Cutting pressure feed regulator
            - Belt speed 25 - 90 m/min
            - Miter cuts up to 60° left and 45° right
            - Patented, ball-bearing turntable for easy miter adjustment
            - Adjustable quick-release vise
            - Quick release lever
            - Automatic cooling



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 250 Super HA -I Easy


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66222 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 250 Super HA -I Easy - - - Neu - -

          Technical details
          cutting diameter 255 mm︱saw band length 2765x 0,9 x 27 mm︱cutting width 300 x 180 mm︱turning speeds 35 + 70 U/min︱total power requirement 1,8 kW︱weight of the machine ca. 450 t︱dimensions of the machine ca. 1,7 x 1,23 x 1,75 m︱
          SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise
            cutting diameter 255 mm
            saw band length 2765x 0,9 x 27 mm
            cutting width 300 x 180 mm
            turning speeds 35 + 70 U/min
            total power requirement 1,8 kW
            weight of the machine ca. 450 t
            dimensions of the machine ca. 1,7 x 1,23 x 1,75 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw, frequency converter hydraulic semi-automatic GBS
            250
            Super HA-I Easy
            • miter left 60° + right 45°
            • Material height sensor (automatic cut start detection)
            • Frame and gear made from one piece, very quiet cut and very low vibration
            • Hydraulic vice can be moved sideways a.
            • Guided, high quality industrial bearings
            • Solid vice + machine casting
            • Large machine bed
            • Machine base with tool compartment and chip drawer
            • Cut monitoring by ammeter
            • Cutting pressure feed regulator
            • Support roller (infeed side)
            • Ball bearing turntable

            Semi-automatic function:
            1. Clamp material
            2. Saw starts
            3. Rapid lowering to the start of the material or the same for series cutting
            cut
            4. Saw band off
            5. Raise the frame to just above the material
            6. Open the vise


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 250 Super AutoCut


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66216 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 250 Super AutoCut - - - neu - -

          Technical details
          capacity 90 degrees: round 255 mm︱capacity 90 degrees: square 240 mm︱ 300 x 180 ︱saw band length 2.765 x 27 x 0,9 mm mm︱table height 950 mm︱band speed 18 - 110 m/min︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,42 t︱
          Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling
            capacity 90 degrees: round 255 mm
            capacity 90 degrees: square 240 mm
            300 x 180
            saw band length 2.765 x 27 x 0,9 mm mm
            table height 950 mm
            band speed 18 - 110 m/min
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,42 t
            Description :
            Double miter metal band saw, GBS 250 Super AutoCut
            - Miter cuts up to 60° left and 45° right
            - Ball bearing turntable
            - Quick release vice
            - Massive, large material support
            - Automatic cooling



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID K-tech DG 50/33 HA-I


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66239 · Bandsaw - Horizontal

          BERG & SCHMID - K-tech DG 50/33 HA-I - - - neu - -

          Technical details
          capacity 90 degrees: round 350 mm︱capacity 90 degrees: square 330 mm︱ 500 x 310 ︱band speed 15 - 100 m/min︱table height 844 mm︱dimensions of saw-band 4250 x 34 x 1,1 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 1,4 x 2,4 x 1,935 m︱
          ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise
            capacity 90 degrees: round 350 mm
            capacity 90 degrees: square 330 mm
            500 x 310
            band speed 15 - 100 m/min
            table height 844 mm
            dimensions of saw-band 4250 x 34 x 1,1 mm
            total power requirement 2,2 kW
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 1,4 x 2,4 x 1,935 m
            Description :
            ACTION PRICE!!!
            2-column double miter band saw K-tech DG 50/33 HA-I
            • 2-column miter saw
            • Solid, yet easy to use
            • Material height sensor (automatic cut start detection)
            • Smooth running thanks to bevel cut, feed controller + cutting pressure
            controller
            • Massive material infeed roller
            • Removable chip tray (disinfection)
            • Energy-saving and low-vibration thanks to bevel cut
            • Ergonomic, safe and free-standing control panel
            • Frequency-controlled saw drive 15 -100 m/min.
            • Hydraulic cutting pressure control valve
            • Hydraulic control of saw frame and vice
            • LEDs for monitoring all safety functions
            • Large dimensioned wheels (520 mm) a.
            • Clear miter setting up to 60°

            Semi-automatic function:
            1. Clamp material
            2. Saw starts
            3. Rapid lowering to the start of the material or the same for series cutting
            cut
            4. Saw band off
            5. Raise the frame to just above the material
            6. Open the vise


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID DGS 350/450 HA-I Easy 34


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66228 · Bandsaw - Horizontal

          BERG & SCHMID - DGS 350/450 HA-I Easy 34 - - - neu - -

          Technical details
          capacity 90 degrees: round 350 mm︱capacity 90 degrees: square 330 mm︱ 450x320 ︱saw band length 4250x34x1,1 mm︱band speed 40 + 80 m/min︱table height 845 mm︱saw band width 34 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,985 t︱dimensions of the machine ca. 1,4 x 2,0 x 2,2 m︱
          Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use
            capacity 90 degrees: round 350 mm
            capacity 90 degrees: square 330 mm
            450x320
            saw band length 4250x34x1,1 mm
            band speed 40 + 80 m/min
            table height 845 mm
            saw band width 34 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,985 t
            dimensions of the machine ca. 1,4 x 2,0 x 2,2 m
            Description :
            Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I
            · miter left + right 60° without machine conversion
            · 34 mm saw blade width
            · Large material support turntable, ball bearings
            · To position the saw blade guides using a very wide linear guide
            · Strong, robust transmission
            · Large chipboards
            · Infeed and outfeed roller
            Removable chip tray (disinfection)
            · Free-standing control panel, safe and ergonomic
            · Storage space for tapes, consumables
            · Cutting pressure regulator Feed regulator
            · Fully hydraulic vise
            Preload super fast (front loading)
            · Material height sensor (automatic cut start detection)

            Semi-automatic function:
            1. Clamp material
            2. Saw starts
            3. Rapid lowering to the start of the material or the same for series cutting
            cut
            4. Saw band off
            5. Raise the frame to just above the material
            6. Open the vise
            Optimum, material-independent cutting result through fine adjustment of the
            saw frame by means of:
            *Pressure Control Valve (Cutting Pressure Force)
            *Feed Control Valve (Speed)
            *Switch with pictogram, easy and clear to use


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID K-tech DG 62/45 HA-I


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66241 · Bandsaw - Horizontal

          BERG & SCHMID - K-tech DG 62/45 HA-I - - - neu - -

          Technical details
          capacity 90 degrees: round 510 mm︱capacity 90 degrees: square 450 mm︱ 650x450 ︱band speed 15 - 100 m/min︱table height 844 mm︱dimensions of saw-band 5320 x 34 x 1,1 mm︱total power requirement 3,0 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 1,9 x 2,87 x 1,3 m︱
          PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens
            capacity 90 degrees: round 510 mm
            capacity 90 degrees: square 450 mm
            650x450
            band speed 15 - 100 m/min
            table height 844 mm
            dimensions of saw-band 5320 x 34 x 1,1 mm
            total power requirement 3,0 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 1,9 x 2,87 x 1,3 m
            Description :
            PROMOTIONAL PRICE!!!
            2-column double miter band saw K-tech DG 62/45 HA-I
            • 2-column miter saw
            • Solid, yet easy to use
            • Material height sensor (automatic cut start detection)
            • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure
            regulator
            • Solid material inlet roller
            • Removable chip tray (disinfection)
            • Energy-saving and low-vibration thanks to diagonal cutting
            • Control panel ergonomic, safe and free-standing
            • Frequency-controlled saw drive 15 -100 m/min.
            • Hydraulic cutting pressure control valve
            • Hydraulic control of saw frame and vice
            • LEDs for monitoring all safety functions
            • Large-sized wheels (520 mm) a.
            • Clear miter adjustment up to 60°

            Semi-automatic function:
            1. Tension the material
            2. Saw starts
            3. Lowering in rapid traverse to the beginning of the material or the same for
            series cutting cut
            4. Saw blade off
            5. Raise the frame until it is just above the material
            6. Vice opens


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 250 Super HA-I Easy


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66219 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 250 Super HA-I Easy - - - neu - -

          Technical details
          capacity 90 degrees: round 255 mm︱capacity 90 degrees: square 240 mm︱ 300 x 180 ︱saw band length 2.765 x 27 x 0,9 mm mm︱table height 950 mm︱band speed 18 - 110 m/min︱total power requirement 1,5 kW︱weight of the machine ca. 0,42 t︱dimensions of the machine ca. 1,23 x 1,7 x 1,75 m︱
          SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise
            capacity 90 degrees: round 255 mm
            capacity 90 degrees: square 240 mm
            300 x 180
            saw band length 2.765 x 27 x 0,9 mm mm
            table height 950 mm
            band speed 18 - 110 m/min
            total power requirement 1,5 kW
            weight of the machine ca. 0,42 t
            dimensions of the machine ca. 1,23 x 1,7 x 1,75 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw, frequency converter hydraulic semi-automatic
            GBS 250 Super HA-I Easy
            • miter left 60° + right 45°
            • Material height sensor (automatic cut start detection)
            • Frame and gear made from one piece, very quiet cut and very low vibration
            • Hydraulic vice can be moved sideways a.
            • Guided, high quality industrial bearings
            • Solid vice + machine casting
            • Large machine bed
            • Machine base with tool compartment and chip drawer
            • Cut monitoring by ammeter
            • Cutting pressure feed regulator
            • Support roller (infeed side)
            • Ball bearing turntable

            Semi-automatic function:
            1. Clamp material
            2. Saw starts
            3. Rapid lowering to the start of the material or the same for series cutting
            cut
            4. Saw band off
            5. Raise the frame to just above the material
            6. Open the vise


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 305 HA-I Easy


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66221 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 305 HA-I Easy - - - neu - -

          Technical details
          capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350x200 ︱saw band length 3375x27x0,9 mm︱band speed 18 - 100 m/min︱table height 940 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,65 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱
          SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling
            capacity 90 degrees: round 305 mm
            capacity 90 degrees: square 260 mm
            350x200
            saw band length 3375x27x0,9 mm
            band speed 18 - 100 m/min
            table height 940 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,65 t
            dimensions of the machine ca. 1,5 x 1,75 x 1,9 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy
            - Miter cuts up to 60° left and 45° right
            - Material height button
            - Ball bearing turntable
            - hydraulic Vice, laterally displaceable
            - Massive, large material support
            - Automatic cooling


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID GBS 305 HA-I Easy


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66220 · Bandsaw - Horizontal

          BERG & SCHMID - GBS 305 HA-I Easy - - - neu - -

          Technical details
          capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350x200 ︱saw band length 3375x27x0,9 mm︱band speed 37 + 74 m/min︱table height 940 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,65 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱
          SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling
            capacity 90 degrees: round 305 mm
            capacity 90 degrees: square 260 mm
            350x200
            saw band length 3375x27x0,9 mm
            band speed 37 + 74 m/min
            table height 940 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,65 t
            dimensions of the machine ca. 1,5 x 1,75 x 1,9 m
            Description :
            SPECIAL PRICE!!!
            Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy
            - Miter cuts up to 60° left and 45° right
            - Material height button
            - Ball bearing turntable
            - hydraulic Vice, laterally displaceable
            - Massive, large material support
            - Automatic cooling


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Bandsaw - Horizontal BERG & SCHMID DGS 500/600 HA-I


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66230 · Bandsaw - Horizontal

          BERG & SCHMID - DGS 500/600 HA-I - - - neu - -

          Technical details
          capacity 90 degrees: round 500 mm︱capacity 90 degrees: square 420 mm︱ 600x400 ︱saw band length 5320x34x1,1 mm︱band speed 15 - 100 m/min︱table height 805 mm︱total power requirement 3,0 kW︱weight of the machine ca. 1,45 t︱dimensions of the machine ca. 1,72 x 2,5 x 2,5 m︱
          Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise
            capacity 90 degrees: round 500 mm
            capacity 90 degrees: square 420 mm
            600x400
            saw band length 5320x34x1,1 mm
            band speed 15 - 100 m/min
            table height 805 mm
            total power requirement 3,0 kW
            weight of the machine ca. 1,45 t
            dimensions of the machine ca. 1,72 x 2,5 x 2,5 m
            Description :
            Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I
            • miter left + right 60°
            • Frequency-controlled saw drive
            • 34 mm saw band height
            • Wear-free material support turntable, ball-bearing
            • To position the saw blade guides using a very wide linear guide
            • Strong, robust gearbox
            • Large chipboards
            • 2 integrated support rollers left and right
            • Removable chip tray (disinfection)
            • Free-standing control panel, safe and ergonomic
            • Storage space for tapes, consumables
            • Hydraulic cutting pressure control valve
            • Material height sensor (automatic cut start detection)
            • Preload super fast (front loading)
            • Hydraulic control of saw frame and vice
            • LEDs for monitoring all safety functions
            • Minimum cutting range from around 10 mm

            Semi-automatic function:
            1. Clamp material
            2. Saw starts
            3. Rapid lowering to the start of the material or the same for series cutting
            cut
            4. Saw band off
            5. Raise the frame to just above the material
            6. Open the vise


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          A horizontal bandsaw is the right tool for you
          Experience versatility and reliability with a horizontal bandsaw

          Bandsaws are extremely versatile machines in the world of metalworking. They can be used to cut a wide variety of materials at varying speeds. They come in several different sizes meaning you can find the perfect one for home or business use based on your needs. A horizontal bandsaw is a great investment as it can be used for a variety of project sizes from metalworking to woodworking. Find your next horizontal bandsaw at LagerMaschinen.

          Find used metalworking machines at LagerMaschinen

          Bandsaws offer operators a variety of advantages over other cutting methods. The uniform distribution of teeth on the cutting blade makes a horizontal bandsaw particularly useful for cutting curved and irregular shapes in metal or wood. Bandsaws offer a high level of consistency in their cuts. If you're looking to invest in a horizontal bandsaw or any other industrial equipment why not check out the variety of used equipment available at LagerMaschinen your source for the best in used machinery.

          Investing in used machinery is a smart move for any business

          When buying equipment for your home or business budgetary concerns always play a role. Optimizing both your time and money is a smart plan and can be easily done by shopping online for used equipment. Buying used machines doesn't mean sacrificing quality for affordability. If you're looking for a horizontal bandsaw or any other cutting machines you can search for products by price or location using LagerMaschinen's user-friendly platform. Save yourself time money and hassle using LagerMaschinen for your next purchase.


          Find your next automatic horizontal band saw here!
          An automatic horizontal band saw for all your needs

          Band saws are classic cutting tools that can be used on a number of different materials. Their versatility makes them perennial favorites among both hobbyists and industry specialists alike. An automatic horizontal band saw can be used both in a home workshop or in a larger factory setting. It is capable of cutting metals as well as timber. When the cutting process is complete the saw blade is automatically stopped ensuring the safety of the operator.

          Bandsaws are functional and practical for home or business

          Band saws are typically categorized into vertical and horizontal machines. Vertical band saws have a stationary blade while an automatic horizontal band saw has a mobile blade that moves through a stationary cutting surface. You can find an automatic horizontal band saw in a variety of sizes making it one of the more versatile cutting tools available. It is useful for cutting a wide variety of materials too. If you're in the market for a band saw check the selection of used machinery available at LagerMaschinen.

          Buying used machinery online is a smart investment

          Nowadays both time and money are things that scarcely anyone can afford to waste. LagerMaschinen looks to help you make the most of both by making the process of shopping for used machinery online as quick and easy as possible. For example you can search for a used automatic horizontal band saw and filter your results by price model or location to find the best machine to suit your needs. Visit LagerMaschinen to see all the advantages of online shopping!