---

---

With dressing unit, good condition!

---

With dressing unit, good condition!

---

F I S C H E R (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year 1986 Serial No. 199 ________________________________________________________ Distance between centres/ Length of workpiece 50 – 1,000 mm Max. Workpiece Ø in clamping device/clamping range 5 - 120 mm Bore of workpiece clamping device 125 mm Workpiece swing Ø over Clamping vice approx.. 400 mm Max. Weight of workpiece 150 kg Max. centre hole dia. up to 300 mm Max. centre hole taper angle 45 ° Angle adjustment of grinding head up to 45 ° Angle adjustment of Grinding spindle carrier up to 45 ° Cross travel of grinding head slide 200 mm Stroke of grinding tool on workpiece 10 mm Grinding tool Ø max. 12 mm Grinding spindle speeds pneumatically driven up to 60.000 rpm Workpiece drive/ Tailstock approx. 0 - 350 rpm Total electrical load, approx. 1,0 kW - 400 V - 50 Hz Weight, approx. 900 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. The workpiece remains stationary, enabling the procuction of perfect centre holes. Infeed to center hole by fine cross movement of grinding head slide * The clamping device (chuck) is motorized as well as the tailstock ! * To clamp cylindrical Workpieces one uses a height adjustable 3 jaw chuck which gives three point contact and assures hi accuracy also if outside concentricity on workpiece is not highly accurate. * Motorized Diamond Tool dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Handwheel to lift-off the grinding tool from workpiece, also for compensation. * On machinery side it is available a Gauge holder bar for quick alignment of Workpiece., * Pneumatic Oil Lubrification of grinding spindle by oil-mist, also pressure valve for steplessly adjustable grinding tool speed up to 60.000 rpm * Plexi glas safety cover on working area , height adjustable. Light Condition : Very good / Can be inspected under power, comes out from a Swiss Company. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

---

---

H E N N I N G E R (Germany) Centre Hole Grinding Machine Model ZS 100 - 1000 Year 1988 Serial No. 88 365 ________________________________________________________ Distance between centres/Length of Workpiece approx. 1,200 mm Height of tailstock centre over guideways 95 mm Height of tailstock centre over clamping jaws 125 mm Max. Ø of centre hole 70 mm Max. taper angle of centre hole 45 – 120 ° Clamping range of vice 5 – 100 mm Max. weight of workpiece 100 kg Stroke of grinding head 100 mm Grinding pin diameter 10/20/32 mm Grinding spindle speeds (2) 13,000 – 27,000 rpm Speed of excentric/orbital movement of spindle 40 rpm Workpiece drive approx.. 100 rpm Total electrical drive, approx. 1 kW - 380 V – 50 Hz Weight approx. 450 kg Accessories / Special Features * Built-on switch cabinet for starting and setting all functions and equipped with a * VISUCONT Digital Display for exact depth grinding of centres. Depth settings are via a hand wheel with fine settings. * Motorized tailstock for highest centre precision on already cyl. ground workpieces. * Manual setting/clamping of workpiece vice allows exact centric clamping. With carbide jaws. * Pneumatic lift-up of grinding head, approx. 25 mm stroke. Foot pedal release. * Manual dressing device for the grinding pin tools, mounted on the right-hand side of machine with adjustable cone angle settings for 45/60,75,90 and 120 degree * Adjustable Plexiglas safety shield with safety switch. * Working lamp, control light for grinding process, etc. * Air controlled central Oil lubrication for all bearings with service unit * No dust exhaust unit available. Condition : Very good to excellent. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

---

Smallest / largest sandable center 2 - 50 mm. Machine dealer with own stock of 2500 m².

---

Machine was used very little, very good condition! The Henninger center grinders excel in the processing of the Workpieces through high precision, excellent roundness, improved concentricity and long durability ZS 100 SERIES FOR WORKPIECES UP TO: 100 KG | 1160MM | 58 MM CENTER Ø The center grinding machines of the ZS 100 series have the highest spindle speed. This makes it possible to create very small and filigree tips ribbons. The machine is available in 2 heights: 600 and 1,200 mm.

---

control panel Dressing device

---

Very nice condition, including exhausting unit.