,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Universal Milling Machine

          Machinelist: Universal Milling Machine


          milling machining centers - universal

          used Milling machines milling machining centers - universal HERMLE C800U


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4936 · milling machining centers - universal

          HERMLE - C800U - - 2001 - HEIDENHAIN TNC-430

          Technical details
          control HEIDENHAIN TNC-430 ︱for axes 5 ︱x-travel 800 mm︱y-travel 600 mm︱z-travel 500 mm︱b-axis 22(+/-110) °︱c-axis 360 °︱table diameter 280 mm︱tool magazin: 30 ︱spindle taper: HSK 63 ︱spindle turning speed range -16000 U/min︱rapid motion -longitudinal/cross/vertical 36 m/min︱rapid traverse feeds rotary table 36 U/min︱voltage 400 V︱dimensions of the machine ca. 3.8x3.6x3.0 m︱weight of the machine ca. 8.5 t︱with electronic hand wheel ︱Coolant through spindle: pressure 40 bar︱3D measuring tracer RENISHAW ︱Chip conveyor
            control HEIDENHAIN TNC-430
            for axes 5
            x-travel 800 mm
            y-travel 600 mm
            z-travel 500 mm
            b-axis 22(+/-110) °
            c-axis 360 °
            table diameter 280 mm
            tool magazin: 30
            spindle taper: HSK 63
            spindle turning speed range -16000 U/min
            rapid motion -longitudinal/cross. 36 m/min
            rapid traverse feeds rotary tabl. 36 U/min
            voltage 400 V
            dimensions of the machine ca. 3.8x3.6x3.0 m
            weight of the machine ca. 8.5 t
            Coolant through spindle: pressur. 40 bar
            3D measuring tracer RENISHAW


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal HERMLE C600U


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-91 · milling machining centers - universal

          HERMLE - C600U - - 2001 - HEIDENHAIN TNC 430

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 450 mm︱spindle turning speed range 16000 U/min︱control HEIDENHAIN TNC 430 ︱Number of axles 5 simultan︱table rotating 360 °︱table - swivable Grad︱table - swivable Grad︱taper ISO SK-40 ︱table diameter 280 mm︱rapid traverse 30wer m/min︱tool change unit 30 -fach︱total power requirement kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3100 x 2400 x 2500 m︱
          his HERMLE C600U is in very good condition and available immediately. Hours on: - Machine ON: 65'656h - Spindle ON: 28'281h Equipment & Description: - Coolant outside with 6bar 3 nozzles - Manual canopy - Electr. heat compensation - Electr. handwheel iTNC - Measuring probe HEIDENHAIN - Blum tool breakage control - Documentation / Operating instructions - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012 never in use) Option: - Div. tool holders ISO SK-40, 109 pcs.
            x-travel 600 mm
            y-travel 450 mm
            z-travel 450 mm
            spindle turning speed range 16000 U/min
            control HEIDENHAIN TNC 430
            Number of axles 5 simultan
            table rotating 360 °
            taper ISO SK-40
            table diameter 280 mm
            rapid traverse 30wer m/min
            tool change unit 30 -fach
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3100 x 2400 x 2500 m
            Description :
            his HERMLE C600U is in very good condition and available immediately.

            Hours on:
            - Machine ON: 65'656h
            - Spindle ON: 28'281h

            Equipment & Description:
            - Coolant outside with 6bar 3 nozzles
            - Manual canopy
            - Electr. heat compensation
            - Electr. handwheel iTNC
            - Measuring probe HEIDENHAIN
            - Blum tool breakage control
            - Documentation / Operating instructions
            - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012
            never in use)

            Option:
            - Div. tool holders ISO SK-40, 109 pcs.



        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal HERMLE C 600 U


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03742 · milling machining centers - universal

          HERMLE - C 600 U - - 2000 -

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 450 mm︱total power requirement 22 kW︱weight of the machine ca. 6.5 t︱dimensions of the machine ca. m︱
          CNC control Heidenhain TNC 430 NC-swivel-rotary table (4. & 5- axis) electrical hand wheel 30 automatic tool changer minimal amount lubrication device measuring feeler Technische Daten / technical details: X-Weg längs / X-travel longitudinal 600 mm Y-Weg quer / Y-travel cross 450 mm Z-Weg senkrecht / Z-travel vertical 450 mm Spindelaufnahme / spindle taper HSK 63 Drehzahlbereich / spindle speed 20 - 16000 UpM /rpm Vorschubbereich / feed range 1-30000 mm/min Eilgang / rapid feed 35 m/min Anzahl der Werkzeugplätze / no. of tool places ATC 30 Schwenkrundtischdurchmesser / swivel-rotary table diameter 280 mm Schwenkbereich A-Achse / swivel range A-axis +20 / - 90 ° Schwenkbereich C-Achse / swivel range C-axis 360 ° Gesamtanschlusswert / drive capacity 22 kW Gewicht der Maschine ca. / weight 6500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            x-travel 600 mm
            y-travel 450 mm
            z-travel 450 mm
            total power requirement 22 kW
            weight of the machine ca. 6.5 t
            Description :
            CNC control Heidenhain TNC 430
            NC-swivel-rotary table (4. & 5- axis)
            electrical hand wheel
            30 automatic tool changer
            minimal amount lubrication device
            measuring feeler

            Technische Daten / technical details:
            X-Weg längs / X-travel longitudinal 600 mm
            Y-Weg quer / Y-travel cross 450 mm
            Z-Weg senkrecht / Z-travel vertical 450 mm
            Spindelaufnahme / spindle taper HSK 63
            Drehzahlbereich / spindle speed 20 - 16000 UpM /rpm
            Vorschubbereich / feed range 1-30000 mm/min
            Eilgang / rapid feed 35 m/min
            Anzahl der Werkzeugplätze / no. of tool places ATC 30
            Schwenkrundtischdurchmesser / swivel-rotary table diameter 280 mm
            Schwenkbereich A-Achse / swivel range A-axis +20 / - 90 °
            Schwenkbereich C-Achse / swivel range C-axis 360 °
            Gesamtanschlusswert / drive capacity 22 kW
            Gewicht der Maschine ca. / weight 6500 Kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal HERMLE C800U


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-J676 · milling machining centers - universal

          HERMLE - C800U - - 1999 - HEIDENHAIN TNC-430

          Technical details
          Control HEIDENHAIN TNC-430 ︱x-travel 800 mm︱y-travel 600 mm︱z-travel 500 mm︱B-axis (table) 280 mm︱table swivelabel +/- 220 (+/-110) °︱-C-axis table rotating 360 °︱tool magazin: 30 ︱spindle taper HSK63 ︱spindle turning speed - stepless -15000 U/min︱rapid traverse feeds rotary table 36 U/min︱rapid travel x/y/z 36 m/min︱Overall size 3800X3600X3000 mm︱weight of the machine ca. 8.5 t︱Coolant through spindle: pressure 40 Bar︱3D measuring tracer RENISHAW ︱Chip conveyor ︱Coolant installation
          SIEMENS 840D www.marcels-maschinen.ch
            Control HEIDENHAIN TNC-430
            x-travel 800 mm
            y-travel 600 mm
            z-travel 500 mm
            B-axis (table) 280 mm
            table swivelabel +/- 220 (+/-110) °
            -C-axis table rotating 360 °
            tool magazin: 30
            spindle taper HSK63
            spindle turning speed - stepless -15000 U/min
            rapid traverse feeds rotary tabl. 36 U/min
            rapid travel x/y/z 36 m/min
            Overall size 3800X3600X3000 mm
            weight of the machine ca. 8.5 t
            Coolant through spindle: pressur. 40 Bar
            3D measuring tracer RENISHAW
            Description :
            SIEMENS 840D

            www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact

          Universal Milling Machine

          used Milling machines Universal Milling Machine HERMLE U 630 T


          • Glaub Werkzeugmaschinen GmbH
          • Industriestraße 36
          • 74194 Neuenstadt am Kocher
          • Deutschland

          • +49 (0) 7139 9366 744
            +49 (0) 7139 9365 794
          • service@gwg-maschinen.com
            www.gwg-maschinen.com
          #2029-1185 · Universal Milling Machine

          HERMLE - U 630 T - - 1999 - Heidenhain TNC 426

          Technical details
          x-travel 630 mm︱y-travel 500 mm︱z-travel 500 mm︱Control Heidenhain TNC 426 ︱total power requirement 7,5 kW︱weight of the machine ca. 4,3 t︱dimensions of the machine ca. 2390x2030x2110 mm︱
          Milling machine Hermle AG - Axes (X/Y/Z): 630 / 500 / 500 mm - Feed rate: 1-15.000 mm/min - Spindle speed range: 20-7,000 rpm - Spindle motor power: 7.5 kW - Max. table load: 400 kg - Dimensions: 2390 x 2030 x 2100 mm - Weight: 4300 kg - Tool changer 16 places - Control: Heidenhain TNC 426
            x-travel 630 mm
            y-travel 500 mm
            z-travel 500 mm
            Control Heidenhain TNC 426
            total power requirement 7,5 kW
            weight of the machine ca. 4,3 t
            dimensions of the machine ca. 2390x2030x2110 mm
            Description :
            Milling machine Hermle AG
            - Axes (X/Y/Z): 630 / 500 / 500 mm
            - Feed rate: 1-15.000 mm/min
            - Spindle speed range: 20-7,000 rpm
            - Spindle motor power: 7.5 kW
            - Max. table load: 400 kg
            - Dimensions: 2390 x 2030 x 2100 mm
            - Weight: 4300 kg
            - Tool changer 16 places
            - Control: Heidenhain TNC 426


        • Glaub Werkzeugmaschinen GmbH
        • Industriestraße 36
        • 74194 Neuenstadt am Kocher
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Universal Milling Machine HERMLE UWF 900


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15164 · Universal Milling Machine

          HERMLE - UWF 900 - - 1997 - Heidenhain TNC 407

          Technical details
          x-travel 600 mm︱y-travel 400 mm︱z-travel 420 mm︱Control Heidenhain TNC 407 ︱quill stroke 75 mm︱table surface area 900x458 mm︱Tool bore SK 40 DIN 2080 oder DIN 6 ︱turning speed range - stepless 20-4500 U/min︱transmission ratio 3 ︱feed stepless 1-5000 mm/min︱rapid motion -longitudinal/cross/vertical 7-7-6 m/min︱total power requirement 13 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 4x3,8x2,0 m︱
            x-travel 600 mm
            y-travel 400 mm
            z-travel 420 mm
            Control Heidenhain TNC 407
            quill stroke 75 mm
            table surface area 900x458 mm
            Tool bore SK 40 DIN 2080 oder DIN 6
            turning speed range - stepless 20-4500 U/min
            transmission ratio 3
            feed stepless 1-5000 mm/min
            rapid motion -longitudinal/cross. 7-7-6 m/min
            total power requirement 13 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 4x3,8x2,0 m


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Universal Milling Machine HERMLE UWF 1001


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-01825 · Universal Milling Machine

          HERMLE - UWF 1001 - - 1991 - Heidenhain 415

          Technical details
          x-travel 700 mm︱y-travel 630 mm︱z-travel 500 mm︱control Heidenhain 415 ︱tool taper SK 40 (DIN 69871) ︱table clamping surface: 1000 x 490 mm︱spindle turning speed - gearbox stage 1 25 - 400 1/min.︱spindle turning speed - gearbox stage 2 401 - 1260 1/min.︱spindle turning speed - gearbox stage 3 1261 - 4200 1/min.︱feed 5 m/min︱rapid traverse 10 m/min︱slewability of milling head + / - 90 °︱diameter of quill 110 mm︱quill stroke 95 mm︱total power requirement 18 kW︱weight of the machine ca. 5 t︱
          HEIDENHAIN TNC 415
            x-travel 700 mm
            y-travel 630 mm
            z-travel 500 mm
            control Heidenhain 415
            tool taper SK 40 (DIN 69871)
            table clamping surface: 1000 x 490 mm
            spindle turning speed - gearbox . 25 - 400 1/min.
            spindle turning speed - gearbox . 401 - 1260 1/min.
            spindle turning speed - gearbox . 1261 - 4200 1/min.
            feed 5 m/min
            rapid traverse 10 m/min
            slewability of milling head + / - 90 °
            diameter of quill 110 mm
            quill stroke 95 mm
            total power requirement 18 kW
            weight of the machine ca. 5 t
            Description :
            HEIDENHAIN TNC 415


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Milling machines Universal Milling Machine HERMLE UWF 802 M


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-3631 · Universal Milling Machine

          HERMLE - UWF 802 M - - 1991 -

          Technical details
          x-travel 500 mm︱y-travel 430 mm︱z-travel 400 mm︱total power requirement - kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 2 x 2 x 2,2 m︱
          Universal Milling Machine speed range 71 - 3550 min-1Spindle SK 40quill stroke vertical 75 mmfeed rate steplessly in all 3 axismeasurements 2,00 x 1,40 x 1,90 mweight 1750 kgPlease note: Control card is defective. Must be repaired or exchanged.Machine currently not ready for operation (tinker machine) Universal-working table, plate 650 x 395 mmmechanical hand wheels for each linear axle for manuel operating Workspace: 500 x 430 x 400 Control: Hermle HS 401
            x-travel 500 mm
            y-travel 430 mm
            z-travel 400 mm
            total power requirement - kW
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 2 x 2 x 2,2 m
            Description :
            Universal Milling Machine

            speed range 71 - 3550 min-1Spindle SK 40quill stroke vertical 75 mmfeed rate steplessly in all 3 axismeasurements 2,00 x 1,40 x 1,90 mweight 1750 kgPlease note: Control card is defective. Must be repaired or exchanged.Machine currently not ready for operation (tinker machine)
            Universal-working table, plate 650 x 395 mmmechanical hand wheels for each linear axle for manuel operating
            Workspace: 500 x 430 x 400

            Control: Hermle HS 401


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Universal Milling Machine HERMLE UWF 600 CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-736032 · Universal Milling Machine

          HERMLE - UWF 600 CNC - - 1990 -

          Technical details
          x-travel 400 mm︱y-travel 330 mm︱z-travel 350 mm︱total power requirement 6,3 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 736 m︱
            x-travel 400 mm
            y-travel 330 mm
            z-travel 350 mm
            total power requirement 6,3 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 736 m


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Universal Milling Machine HERMLE UWF 1000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03030 · Universal Milling Machine

          HERMLE - UWF 1000 - - 1988 - Heidenhain

          Technical details
          x-travel 700 mm︱y-travel 550 mm︱z-travel 500 mm︱spindle taper ISO 40 ︱control Heidenhain ︱type TNC 155 ︱milling-head swivable +/- ︱boring spindle ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 700 mm
            y-travel 550 mm
            z-travel 500 mm
            spindle taper ISO 40
            control Heidenhain
            type TNC 155


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Universal Milling Machine HERMLE fp  1000


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03692 · Universal Milling Machine

          HERMLE - fp 1000 - - 1988 - heidenhain 355

          Technical details
          x-travel 700 mm︱y-travel 630 mm︱z-travel 500 mm︱control heidenhain 355 ︱tool taper SK 40 (DIN 69871) ︱table clamping surface: 1000 x 490 mm︱spindle turning speed - gearbox stage 1 25 - 400 1/min.︱spindle turning speed - gearbox stage 2 401 - 1260 1/min.︱spindle turning speed - gearbox stage 3 1261 - 4200 1/min.︱feed 5 m/min︱rapid traverse 10 m/min︱slewability of milling head + / - 90 °︱diameter of quill 110 mm︱quill stroke 95 mm︱total power requirement 18 kW︱weight of the machine ca. 5 t︱
          HEIDENHAIN TNC 355
            x-travel 700 mm
            y-travel 630 mm
            z-travel 500 mm
            control heidenhain 355
            tool taper SK 40 (DIN 69871)
            table clamping surface: 1000 x 490 mm
            spindle turning speed - gearbox . 25 - 400 1/min.
            spindle turning speed - gearbox . 401 - 1260 1/min.
            spindle turning speed - gearbox . 1261 - 4200 1/min.
            feed 5 m/min
            rapid traverse 10 m/min
            slewability of milling head + / - 90 °
            diameter of quill 110 mm
            quill stroke 95 mm
            total power requirement 18 kW
            weight of the machine ca. 5 t
            Description :
            HEIDENHAIN TNC 355


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Milling machines Universal Milling Machine HERMLE UWF 801


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-3999 · Universal Milling Machine

          HERMLE - UWF 801 - - 1988 -

          Technical details
          x-travel 500 mm︱y-travel 430 mm︱z-travel 400 mm︱total power requirement 4 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
          Universal tool milling machine Spindle SK 40Speed range 50 - 2500 min-1Space required approx. 3 x 3 x 2 mWeight approx. 1400 kgFor further data, please refer to the attached data sheet. Rigid table 800 x 390 mmChip trayDocumentation Workspace: 500 x 430 x 400 Drive: 3 Control: Heidenhain TNC 135
            x-travel 500 mm
            y-travel 430 mm
            z-travel 400 mm
            total power requirement 4 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 2 x 2 x 2 m
            Description :
            Universal tool milling machine

            Spindle SK 40Speed range 50 - 2500 min-1Space required approx. 3 x 3 x 2 mWeight approx. 1400 kgFor further data, please refer to the attached data sheet.
            Rigid table 800 x 390 mmChip trayDocumentation
            Workspace: 500 x 430 x 400
            Drive: 3
            Control: Heidenhain TNC 135


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Universal Milling Machine HERMLE UWF 700


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3151 · Universal Milling Machine

          HERMLE - UWF 700 - - 1984 -

          Technical details
          x-travel 410 mm︱y-travel 310 mm︱z-travel 400 mm︱tool taper ISO 40 ︱spindle turning speed range 40 - 2000 U/min︱table-size 700 x 280 mm︱surface area 830 x 224 mm︱total power requirement 2,2 kW︱dimensions of the machine ca. 1,4 x 2,1 x 2,0 m︱Control Heidenhain TNC 145
            x-travel 410 mm
            y-travel 310 mm
            z-travel 400 mm
            tool taper ISO 40
            spindle turning speed range 40 - 2000 U/min
            table-size 700 x 280 mm
            surface area 830 x 224 mm
            total power requirement 2,2 kW
            dimensions of the machine ca. 1,4 x 2,1 x 2,0 m
            Control Heidenhain TNC 145
            Description :



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Universal Milling Machine HERMLE UWF 801


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-2392 · Universal Milling Machine

          HERMLE - UWF 801 - - 1983 -

          Technical details
          x-travel 500 mm︱y-travel 400 mm︱z-travel 400 mm︱total power requirement 3 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
          Universal tool milling machine Spindle ISO-40,18 speedranges 40 - 2000 1/minreed rate x, y 4 - 1600 1/min z 4 - 1000 1/minmeasurements 2,3 x 2,3 x 1,7 m, weight 1350 kg With manual control: 520 x 450 x 410table 800 x 400 mm Workspace: 500 x 430 x 400 Drive: 3 Control: TNC 135
            x-travel 500 mm
            y-travel 400 mm
            z-travel 400 mm
            total power requirement 3 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2 x 2 x 2 m
            Description :
            Universal tool milling machine

            Spindle ISO-40,18 speedranges 40 - 2000 1/minreed rate x, y 4 - 1600 1/min z 4 - 1000 1/minmeasurements 2,3 x 2,3 x 1,7 m, weight 1350 kg
            With manual control: 520 x 450 x 410table 800 x 400 mm
            Workspace: 500 x 430 x 400
            Drive: 3
            Control: TNC 135


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Universal Milling Machine HERMLE UWF 801


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9131203 · Universal Milling Machine

          HERMLE - UWF 801 - - -

          Technical details
          x-travel 510 mm︱y-travel 450 mm︱z-travel 410 mm︱taper in main spindle MAS BT 45° (SK40) ︱table surface area 800 x 395 mm︱T-slots 6 ︱turning speeds 50 - 2500 U/min︱feed stepless 4-1600/4-1000 mm/min︱voltage 400 V︱total power requirement 5,0 kW︱weight of the machine ca. 1400 kg︱range L-W-H 2300 x 2300 x 1800 mm︱
          ** from a training workshop ** maintained condition (!!) Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9131203
            x-travel 510 mm
            y-travel 450 mm
            z-travel 410 mm
            taper in main spindle MAS BT 45° (SK40)
            table surface area 800 x 395 mm
            T-slots 6
            turning speeds 50 - 2500 U/min
            feed stepless 4-1600/4-1000 mm/min
            voltage 400 V
            total power requirement 5,0 kW
            weight of the machine ca. 1400 kg
            range L-W-H 2300 x 2300 x 1800 mm
            Description :
            ** from a training workshop
            ** maintained condition (!!)

            Furnishing :
            - robust universal milling machine
            - swiveling control panel, right front
            - rotatable universal milling head (re/li = 90°)
            * with hydraulic tool clamping
            - manual milling spindle feed, with locking
            - swiveling milling spindle protection
            - Stable T-slot clamping/angle table
            - Axis feeds with rapid traverse
            - Central lubrication unit
            - Control cabinet, installed on the left

            * Digital display - without function

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9131203


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Universal Milling Machine HERMLE UWF801


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-003 · Universal Milling Machine

          HERMLE - UWF801 - - -

          Technical details
          x-travel 510 mm︱y-travel 450 mm︱z-travel 410 mm︱table surface area 800 x 220 mm︱Spindle taper ISO40 0︱turning speed range 45-2000 U/min︱DRO: Heidenhain ︱total power requirement kW︱weight of the machine ca. 1,4 t︱required space 2,3 x 2,3 x 1x7 m︱
            x-travel 510 mm
            y-travel 450 mm
            z-travel 410 mm
            table surface area 800 x 220 mm
            Spindle taper ISO40 0
            turning speed range 45-2000 U/min
            DRO: Heidenhain
            weight of the machine ca. 1,4 t
            required space 2,3 x 2,3 x 1x7 m


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Purchase one of several universal milling machines
          Used Universal Milling Machines from LagerMaschinen

          When choosing a machine for your newly opened or expanding business it can sometimes be overwhelming to find that new machines are far out of your price range. However production growth sometimes depends on purchasing new equipment tools and machines. In this case a used machine may be the perfect solution for you. LagerMaschinen provides a platform for buyers and sellers to have their business and budgetary needs met in an efficient manner. By purchasing universal milling machines through LagerMaschinen you'll not only be saving yourself time and money you'll also be forming connections in your field. Additionally LagerMaschinen's delivery and installation services mean your universal milling machines can be up and running in no time.

          Universal Milling Machines for every production branch.

          Universal milling machines are used in a variety of different branches of production industry. Milling machines are useful for planing drilling and keyway and slot cutting. Whether your particular industry requires a horizontal mill or vertical mill LagerMaschinen will find something within your specifications. Search in your area for the most immediate solutions and communicate with sellers to find the universal milling machines that best fit your needs. Are you looking for a CNC mill? LagerMaschinen's delivery and installation services mean you won't need to install and route computer hardware to your new universal milling machine. Search for computers and software corresponding to the CNC universal milling machines rather than purchasing these items new and spending a fortune. Find your next machine at an affordable price with LagerMaschinen.