,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Milling machines

          Machinelist: Milling machines


          Bed Type Milling Machine - Universal

          used Milling machines Bed Type Milling Machine - Universal SACHMAN T10GP


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-168 · Bed Type Milling Machine - Universal

          SACHMAN - T10GP - - 2001 - HEIDENHAIN TNC 426

          Technical details
          x-travel 2000 mm︱y-travel 800 mm︱z-travel 800 mm︱Control HEIDENHAIN TNC 426 ︱total power requirement kW︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱
          This SACHMAN is in good condition and is available immediately.
            x-travel 2000 mm
            y-travel 800 mm
            z-travel 800 mm
            Control HEIDENHAIN TNC 426
            weight of the machine ca. 15 t
            Description :
            This SACHMAN is in good condition and is available immediately.
          Datasheet
          Request / Contact

          Milling Machine - Vertical

          used Milling machines Milling Machine - Vertical MAHO MH 2000


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-111 · Milling Machine - Vertical

          MAHO - MH 2000 - - 1986 - PHILIPS 432

          Technical details
          x-travel 1600 mm︱y-travel 1000 mm︱z-travel 650 mm︱quill stroke 125 mm︱spindle turning speed range 40 - 2000 U/min︱tool taper SK-40 ︱table surface area 1000 x 650 mm︱table load 4 t︱rapid traverse 6 m/min︱feed 1 - 3000 mm/min︱Control PHILIPS 432 ︱total power requirement kW︱weight of the machine ca. 11,5 t︱dimensions of the machine ca. 6,2 x 4,8 x 2,9 m︱
          The MAHO is 100% functional and can be viewed under power by arrangement. can be inspected Description: Number of axles: 5 Axle designation: X, Y, Z, B, A Speed range: 0, 40, 50, 100, 125, 160, 200, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000rpm Feed range: 0-4000 Rapid traverse: 6000 Special features: Horizontal-vertical spindle Rotary table can be set up (can be set up at different places on the table) Only fixed rotation ranges can be set
            x-travel 1600 mm
            y-travel 1000 mm
            z-travel 650 mm
            quill stroke 125 mm
            spindle turning speed range 40 - 2000 U/min
            tool taper SK-40
            table surface area 1000 x 650 mm
            table load 4 t
            rapid traverse 6 m/min
            feed 1 - 3000 mm/min
            Control PHILIPS 432
            weight of the machine ca. 11,5 t
            dimensions of the machine ca. 6,2 x 4,8 x 2,9 m
            Description :
            The MAHO is 100% functional and can be viewed under power by arrangement.
            can be inspected
            Description:
            Number of axles: 5
            Axle designation: X, Y, Z, B, A
            Speed range: 0, 40, 50, 100, 125, 160, 200, 315, 400, 500,
            630, 800, 1000, 1250, 1600, 2000rpm
            Feed range: 0-4000
            Rapid traverse: 6000
            Special features: Horizontal-vertical spindle

            Rotary table can be set up (can be set up at different places on the table)

            Only fixed rotation ranges can be set
          Datasheet
          Request / Contact

          milling machining centers - universal

          used Milling machines milling machining centers - universal EMCO MaxxMill 500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-131 · milling machining centers - universal

          EMCO - MaxxMill 500 - - 2014 - SIEMENS 840D

          Technical details
          x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱B-axis (table) +-100 °︱c-axis 360 °︱spindle turning speed range 0 - 15000 U/min︱tool taper ISO SK-40 ︱workpiece weight 250 kg︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱
          This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 built in 2014: Machine hours 20,939 h Spindle hours 6,731 h Operating hours (machining) 5,042 h
            x-travel 750 mm
            y-travel 550 mm
            z-travel 500 mm
            Control SIEMENS 840D
            B-axis (table) +-100 °
            c-axis 360 °
            spindle turning speed range 0 - 15000 U/min
            tool taper ISO SK-40
            workpiece weight 250 kg
            tool change unit 30 -fach
            rapid traverse 30 m/min
            table dimension - longitudinal 600 mm
            table dimension - cross 600 mm
            total power requirement 26,4 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3,5 x 2,45 x 2,8 m
            Description :
            This EMCO MaxxMill 500 machining centre is in good condition.
            can be inspected at any time by arrangement under chip at the seller.

            Emco Maxxmill500 built in 2014:
            Machine hours 20,939 h
            Spindle hours 6,731 h
            Operating hours (machining) 5,042 h
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal EMCO MaxxMill 500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-132 · milling machining centers - universal

          EMCO - MaxxMill 500 - - 2012 - SIEMENS 840D

          Technical details
          x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱tool taper ISO SK-40 ︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table - swivable +/- 100 °︱table rotating 360 °︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱workpiece weight 250 kg︱spindle turning speed range 0-15000 U/min︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱
          This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 Bj. 2012: Maschinenstunden 19.125 h Spindelstunden 4.954 h Betriebsstunden (zerspanen) 3.483 h
            x-travel 750 mm
            y-travel 550 mm
            z-travel 500 mm
            Control SIEMENS 840D
            tool taper ISO SK-40
            tool change unit 30 -fach
            rapid traverse 30 m/min
            table - swivable +/- 100 °
            table rotating 360 °
            table dimension - longitudinal 600 mm
            table dimension - cross 600 mm
            workpiece weight 250 kg
            spindle turning speed range 0-15000 U/min
            total power requirement 26,4 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3,5 x 2,45 x 2,8 m
            Description :
            This EMCO MaxxMill 500 machining centre is in good condition.
            can be inspected at any time by arrangement under chip at the seller.

            Emco Maxxmill500 Bj. 2012:
            Maschinenstunden 19.125 h
            Spindelstunden 4.954 h
            Betriebsstunden (zerspanen) 3.483 h
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal HERMLE C600U


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-91 · milling machining centers - universal

          HERMLE - C600U - - 2001 - HEIDENHAIN TNC 430

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 450 mm︱spindle turning speed range 16000 U/min︱control HEIDENHAIN TNC 430 ︱Number of axles 5 simultan︱table rotating 360 °︱table - swivable Grad︱table - swivable Grad︱taper ISO SK-40 ︱table diameter 280 mm︱rapid traverse 30wer m/min︱tool change unit 30 -fach︱total power requirement kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3100 x 2400 x 2500 m︱
          his HERMLE C600U is in very good condition and available immediately. Hours on: - Machine ON: 65'656h - Spindle ON: 28'281h Equipment & Description: - Coolant outside with 6bar 3 nozzles - Manual canopy - Electr. heat compensation - Electr. handwheel iTNC - Measuring probe HEIDENHAIN - Blum tool breakage control - Documentation / Operating instructions - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012 never in use) Option: - Div. tool holders ISO SK-40, 109 pcs.
            x-travel 600 mm
            y-travel 450 mm
            z-travel 450 mm
            spindle turning speed range 16000 U/min
            control HEIDENHAIN TNC 430
            Number of axles 5 simultan
            table rotating 360 °
            taper ISO SK-40
            table diameter 280 mm
            rapid traverse 30wer m/min
            tool change unit 30 -fach
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3100 x 2400 x 2500 m
            Description :
            his HERMLE C600U is in very good condition and available immediately.

            Hours on:
            - Machine ON: 65'656h
            - Spindle ON: 28'281h

            Equipment & Description:
            - Coolant outside with 6bar 3 nozzles
            - Manual canopy
            - Electr. heat compensation
            - Electr. handwheel iTNC
            - Measuring probe HEIDENHAIN
            - Blum tool breakage control
            - Documentation / Operating instructions
            - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012
            never in use)

            Option:
            - Div. tool holders ISO SK-40, 109 pcs.

          Datasheet
          Request / Contact

          milling machining centers - vertical

          used Milling machines milling machining centers - vertical DMG DMU 60 monoBlock


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-103 · milling machining centers - vertical

          DMG - DMU 60 monoBlock - - 2008 - MillPlus HEIDENHAIN

          Technical details
          x-travel 630 mm︱y-travel 560 mm︱z-travel 560 mm︱Control MillPlus HEIDENHAIN︱table dimension - longitudinal 1000 mm︱table dimension - cross 600 mm︱tool adaptor ︱spindle turning speed range 12000 U/min︱Number of axles 4 St.︱rapid traverse 30 m/min︱tool change unit 24 -fach︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          The DMU 60 monoBlock is in very good condition and immediately available. Accessories: - Measuring probe
            x-travel 630 mm
            y-travel 560 mm
            z-travel 560 mm
            Control MillPlus HEIDENHAIN
            table dimension - longitudinal 1000 mm
            table dimension - cross 600 mm
            spindle turning speed range 12000 U/min
            Number of axles 4 St.
            rapid traverse 30 m/min
            tool change unit 24 -fach
            Description :
            The DMU 60 monoBlock is in very good condition and immediately available.
            Accessories:
            - Measuring probe
          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used Milling machines Planer-Type Milling M/C - Double Column ZIMMERMANN FZ33c


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-130 · Planer-Type Milling M/C - Double Column

          ZIMMERMANN - FZ33c - - 2015 - HEIDENHAIN iTNC530

          Technical details
          x-travel 2500 mm︱y-travel 3000 mm︱z-travel 1250 mm︱Control HEIDENHAIN iTNC530 ︱spindle turning speed range 22000 U/min︱tool change unit 50 -fach︱tool taper HSK 63 A ︱rated capacity kVA︱milling-head swivable +/- 110° ︱c-axis +-300° ︱total power requirement 130 kW︱weight of the machine ca. 60 t︱dimensions of the machine ca. 7,6 x 7,3 x 5,7 m︱
          This ZIMMERMANN FZ33c is in a very good condition as new. The machine can be viewed under power by arrangement only until week 15. be inspected. Description: Technical data of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° incl. vibration sensor incl. bearing temperature sensor incl. rotary feed-through for inner KM-feed IKZ 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15" TFT colour display Extraction system Keller Vario P1 Machine room roofing Tool changer 50-fold, chain magazine, behind the machine Chip conveyor, ejection 60° left, front side Renishaw RMP60 measuring probe Blum laser tool measurement "Control NT-Micro Clamping table Length x width x height 2500 x 3250 x 400mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged lengthwise 18H12 Distance between T-slots 250 mm Dimensions, weights Space requirement (without peripherals) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection Voltage (three-phase) 400 V Frequency 50 Hz Fuse see installation plan Power requirement see installation plan Compressed air connection (on-site) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine equipment) Linear axis drives Feed speed X-, Y-, Z-axis 60 m/min Axis acceleration X-, Y-, Z-axis up to 5 m/s² Drives rotary axes -VH30 Feed speed A-, C-axis 360 °/s Axis acceleration A-, C-axis 700 °/s² Resolution A-, C-axis 0.0001 Accuracies of linear axes - according to VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0,028 mm Z-axis P= 0,020 mm Repeat accuracy X-axis Ps= 0.015 mm Y-axis Ps= 0,016 mm Z-axis Ps= 0,010 mm Resolution of the measuring systems (interpol) A-, C- axis 0,0001°. Accuracy rotary axes -VH30 Positioning accuracy A-, C- axis P= 12" = 0,0033°. Repeat accuracy A-, C- axis Ps= 8" = 0,0022°. Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% ED) 60kW, spindle speed 22.000 min-1, 95Nm, HSK-A63 Outer dimensions fork head L x W approx. 500 x 600 mm Nominal torque rotary axes control loop A: min. 1200 Nm C: min. 1047 Nm clamped A- and C-axis: 3000 Nm (permanent grease lubrication with automatic relubrication system) Swivel axis - spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool clamping Hydraulic Permissible tool weight 4.5 kg (manufacturer's specification) Coolant supply outside and inside Coolant-lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40l/min at 20 bar Pump 2: 20l/min at 40 bar, Blowing air at the front of the milling spindle
            x-travel 2500 mm
            y-travel 3000 mm
            z-travel 1250 mm
            Control HEIDENHAIN iTNC530
            spindle turning speed range 22000 U/min
            tool change unit 50 -fach
            tool taper HSK 63 A
            milling-head swivable +/- 110°
            c-axis +-300°
            total power requirement 130 kW
            weight of the machine ca. 60 t
            dimensions of the machine ca. 7,6 x 7,3 x 5,7 m
            Description :
            This ZIMMERMANN FZ33c is in a very good condition as new.
            The machine can be viewed under power by arrangement only until week 15.
            be inspected.

            Description:
            Technical data of the machine and working ranges
            X-axis 2500 mm
            Y-axis 3000 mm
            Z-axis 1250 mm
            A-axis ± 110 °
            C-axis ± 300 °

            incl. vibration sensor
            incl. bearing temperature sensor
            incl. rotary feed-through for inner KM-feed IKZ
            5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15" TFT colour display
            Extraction system Keller Vario P1
            Machine room roofing
            Tool changer 50-fold, chain magazine, behind the machine
            Chip conveyor, ejection 60° left, front side
            Renishaw RMP60 measuring probe
            Blum laser tool measurement "Control NT-Micro

            Clamping table
            Length x width x height 2500 x 3250 x 400mm
            Table load 8000 kg/m² (max. 16000 kg)
            T-slots, arranged lengthwise 18H12
            Distance between T-slots 250 mm

            Dimensions, weights
            Space requirement (without peripherals) approx. 7600 x 7300 x 5650 mm
            Total weight approx. 53500 kg

            Electrical connection
            Voltage (three-phase) 400 V
            Frequency 50 Hz
            Fuse see installation plan
            Power requirement see installation plan

            Compressed air connection (on-site)
            Required air pressure 6 bar
            Average air consumption approx. 15 m³/h (depending on
            machine equipment)

            Linear axis drives
            Feed speed X-, Y-, Z-axis 60 m/min
            Axis acceleration X-, Y-, Z-axis up to 5 m/s²

            Drives rotary axes -VH30
            Feed speed A-, C-axis 360 °/s
            Axis acceleration A-, C-axis 700 °/s²
            Resolution A-, C-axis 0.0001

            Accuracies of linear axes - according to VDI / DGQ 3441
            Positioning accuracy X-axis P= 0.026 mm
            Y-axis P= 0,028 mm
            Z-axis P= 0,020 mm
            Repeat accuracy X-axis Ps= 0.015 mm
            Y-axis Ps= 0,016 mm
            Z-axis Ps= 0,010 mm
            Resolution of the measuring systems (interpol) A-, C- axis 0,0001°.

            Accuracy rotary axes -VH30
            Positioning accuracy A-, C- axis P= 12" = 0,0033°.
            Repeat accuracy A-, C- axis Ps= 8" = 0,0022°.

            Milling head VH30
            2-axis milling head: VH30,
            Milling spindle Siemens Weiss
            Spindle power S1 (100% ED) 60kW,
            spindle speed 22.000 min-1, 95Nm, HSK-A63
            Outer dimensions fork head L x W approx. 500 x 600 mm
            Nominal torque rotary axes control loop A: min. 1200 Nm
            C: min. 1047 Nm
            clamped A- and C-axis: 3000 Nm
            (permanent grease lubrication with automatic relubrication system)
            Swivel axis - spindle nose 326 mm
            Tool holder HSK 63 A
            Tool clamping Spring clamp
            Tool clamping Hydraulic
            Permissible tool weight 4.5 kg (manufacturer's specification)

            Coolant supply outside and inside
            Coolant-lubricant supply (emulsion) at the front of the milling spindle with
            belt filter system
            Volume 1500 l
            Pump 1: 40l/min at 20 bar
            Pump 2: 20l/min at 40 bar,
            Blowing air at the front of the milling spindle

          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column CORREA PANTERA


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-170 · Planer-Type Milling M/C - Double Column

          CORREA - PANTERA - - 2012 - HH iTNC 530

          Technical details
          x-travel 6800 mm︱y-travel 3400 mm︱z-travel 2000 mm︱Control HH iTNC 530 ︱table dimension - longitudinal 6000 mm︱table dimension - cross 2500 mm︱table load 10 t︱tool change unit 80 Pos.︱dist. between columns - front to rear 4700 mm︱total power requirement kW︱weight of the machine ca. 80 t︱dimensions of the machine ca. 12 x 11 x 7 m︱
          This portal milling machine is in good condition and can be inspected by arrangement be inspected under power at the seller's premises. Description: - 80-position tool changer with 40 positions ISO SK-50 / 40 positions HSK-63A - 4-fold automatic head changer - 2 pieces orthogonal milling head OAD with: --> Tool holder ISO SK-50 --> Spindle speed: 20-6000 rpm --> 46kW drive power (100% ED S1) - 1 piece 2-axis fork milling head E5E (CAC II) with: --> HSK-63A tool holder --> swivelling range C-axis: +/- 200° --> swivelling range B-axis: +/- 100° --> drive power 37kW --> Spindle speed max. 24000 rpm, ***** Spindle DEFECTIVE !!! ***** 1 vertical spindle F-400 --> Spindle speed 4000 rpm --> drive power 25kW IKZ 38bar with paper belt filter 2 chip conveyors (lengthwise channelling belt conveyor 1 cross conveyor Heidenhain longitudinal measuring rods in all three axes Z-axis with 4-fold linear guide Wireless measuring probe M&H 20.41 Multi BRANKAM machine protection system CMS-100 (collision protection) Working area cover (roof) can be opened at the rear and front BLUM tool measurement Heidenhain HR 550 FS radio handwheel X and Y-axis drive via rack and 2 pinions Z-axis drive via ball screw
            x-travel 6800 mm
            y-travel 3400 mm
            z-travel 2000 mm
            Control HH iTNC 530
            table dimension - longitudinal 6000 mm
            table dimension - cross 2500 mm
            table load 10 t
            tool change unit 80 Pos.
            dist. between columns - front to. 4700 mm
            weight of the machine ca. 80 t
            dimensions of the machine ca. 12 x 11 x 7 m
            Description :
            This portal milling machine is in good condition and can be inspected by
            arrangement
            be inspected under power at the seller's premises.
            Description:
            - 80-position tool changer with 40 positions ISO SK-50 / 40 positions HSK-63A
            - 4-fold automatic head changer
            - 2 pieces orthogonal milling head OAD with:
            --> Tool holder ISO SK-50
            --> Spindle speed: 20-6000 rpm
            --> 46kW drive power (100% ED S1)
            - 1 piece 2-axis fork milling head E5E (CAC II) with:
            --> HSK-63A tool holder
            --> swivelling range C-axis: +/- 200°
            --> swivelling range B-axis: +/- 100°
            --> drive power 37kW
            --> Spindle speed max. 24000 rpm,
            ***** Spindle DEFECTIVE !!! *****
            1 vertical spindle F-400
            --> Spindle speed 4000 rpm
            --> drive power 25kW

            IKZ 38bar with paper belt filter
            2 chip conveyors (lengthwise channelling belt conveyor
            1 cross conveyor
            Heidenhain longitudinal measuring rods in all three axes
            Z-axis with 4-fold linear guide
            Wireless measuring probe M&H 20.41 Multi
            BRANKAM machine protection system CMS-100 (collision protection)
            Working area cover (roof) can be opened at the rear and front
            BLUM tool measurement
            Heidenhain HR 550 FS radio handwheel
            X and Y-axis drive via rack and 2 pinions
            Z-axis drive via ball screw
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH-COBURG Valutec


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-151 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - Valutec - - 2005 - SIEMENS 840D

          Technical details
          x-travel 6000 mm︱y-travel 3500 mm︱z-travel 1500 mm︱Control SIEMENS 840D ︱table load 12 t︱height over floor 6300 mm︱table dimension - longitudinal 5000 mm︱table dimension - cross 2500 mm︱no. of tables 2 ︱tool change unit 200 -fach︱weight of tools max. 30 kg︱tool taper HSK A 100 ︱diameter of tools max. 250 mm︱workpiece length 500 mm︱spindle turning speed range 5-6000 U/min︱c-axis -10 bis 370 °︱b-axis 5 bis -95 °︱column daylight 3000 mm︱distance spindle nose and table 1500 mm︱total power requirement kW︱
            x-travel 6000 mm
            y-travel 3500 mm
            z-travel 1500 mm
            Control SIEMENS 840D
            table load 12 t
            height over floor 6300 mm
            table dimension - longitudinal 5000 mm
            table dimension - cross 2500 mm
            no. of tables 2
            tool change unit 200 -fach
            weight of tools max. 30 kg
            tool taper HSK A 100
            diameter of tools max. 250 mm
            workpiece length 500 mm
            spindle turning speed range 5-6000 U/min
            c-axis -10 bis 370 °
            b-axis 5 bis -95 °
            column daylight 3000 mm
            distance spindle nose and table 1500 mm
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH-COBURG POWERTEC 4000 AP


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-29 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - POWERTEC 4000 AP - - 1995 - SIEMENS 840C

          Technical details
          x-travel 14000 mm︱y-travel 5000 mm︱z-travel 1500 mm︱w-axis 3000 mm︱column daylight 4000 mm︱column: max. dist. table - spindle nose 4500 mm︱workpiece weight 100 t︱table dimension - longitudinal 9000 mm︱table dimension - cross 3000 mm︱spindle taper ISO SK 50 ︱spindle turning speed range 2-2500 U/min︱spindle motor 113 kW︱spindle diameter 200 mm︱max. torque on the spindle 9500 Nm︱feed in x - axis 1-10000 mm/min︱feed in y - axis 1-10000 mm/min︱feed range Z-direction 1-10000 mm/min︱rapid traverse 20000 mm/min︱height over floor 8600 mm︱control SIEMENS 840C
          ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION PLANER TYPE MACHINING CENTER - EACH WITH 3 PALLETS 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.
            x-travel 14000 mm
            y-travel 5000 mm
            z-travel 1500 mm
            w-axis 3000 mm
            column daylight 4000 mm
            column: max. dist. table - spind. 4500 mm
            workpiece weight 100 t
            table dimension - longitudinal 9000 mm
            table dimension - cross 3000 mm
            spindle taper ISO SK 50
            spindle turning speed range 2-2500 U/min
            spindle motor 113 kW
            spindle diameter 200 mm
            max. torque on the spindle 9500 Nm
            feed in x - axis 1-10000 mm/min
            feed in y - axis 1-10000 mm/min
            feed range Z-direction 1-10000 mm/min
            rapid traverse 20000 mm/min
            height over floor 8600 mm
            control SIEMENS 840C
            Description :
            ATTACHMENTS
            angular milling head yes
            autom. tool clamping yes
            ball spindles yes
            guideway covers yes
            coolant unit yes
            high pressure cooling syst. (through spindle) yes
            closed cabin yes
            chip conveyor yes


            TECHNICAL DESCRIPTION
            PLANER TYPE MACHINING CENTER - EACH WITH 3 PALLETS 9000 x 3000 mm:
            - Tool changer with 420 tools
            - Head pick-up system
            - Video monitoring via camera
            - High pressure lubrication unit for inner cooling 70bar

            AVAILABLE HEAD UNITS:
            - Fixed angle head HS800C600 105 Kw 600 long
            - Fixed angle head HSD350C850 50 Kw 850 long
            - Fixed angle head HSD 40C880 12 Kw 880 long
            - Fixed angle head HSD 190C1000 30 Kw 1000 long
            - Vertical spindle unit VS800C 105 Kw 900 long
            - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time
            - Angle spindle unit SO800C905 - 22,5° fix
            - Angle spindle unit HSE1200CS -25° fix
            - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth

            One additional drilling extension SE 350C plus 1 SE500C.

            DESCRIPTION OF CONDITION
            In 2011/2012 these 2 identical machines were retrofitted
            The milling length was extended to 14meters and an automatic changing system
            for table pallets was installed.
            Both machines can be seen under power by prior appointment.

          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column INGERSOLL-BOHLE


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-54 · Planer-Type Milling M/C - Double Column

          INGERSOLL-BOHLE - - - 1991 - FIDIA M30

          Technical details
          x-travel 4000 mm︱y-travel 2500 mm︱z-travel 1200 mm︱Control FIDIA M30 ︱spindle 37 kW︱turning speeds 4500 U/min︱column daylight 2300 mm︱dist. milling spindle - table surface 1250 mm︱taper ISO SK-50 ︱table dimension - longitudinal 3000 mm︱table dimension - cross 1500 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 4000 mm
            y-travel 2500 mm
            z-travel 1200 mm
            Control FIDIA M30
            spindle 37 kW
            turning speeds 4500 U/min
            column daylight 2300 mm
            dist. milling spindle - table su. 1250 mm
            taper ISO SK-50
            table dimension - longitudinal 3000 mm
            table dimension - cross 1500 mm
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH-COBURG 14-10 FP200NC


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-147 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - 14-10 FP200NC - - 1986 / 2010 retrofit - HEIDENHAIN iTNC 530

          Technical details
          x-travel 6200 mm︱y-travel 3200 mm︱z-travel 1000 mm︱Control HEIDENHAIN iTNC 530 ︱number of spindle speeds 2000 U/min.︱table dimension - longitudinal 3500 mm︱table dimension - cross 2000 mm︱table load 20 t︱T-slot - distance 125 mm︱T-slot - width 28 mm︱tool taper SK-50 ︱tool change unit 300 -fach︱column daylight 2350 mm︱coolant IKZ 60 bar︱w-axis 1500 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 12700 x 11000 x 6000 m︱
            x-travel 6200 mm
            y-travel 3200 mm
            z-travel 1000 mm
            Control HEIDENHAIN iTNC 530
            number of spindle speeds 2000 U/min.
            table dimension - longitudinal 3500 mm
            table dimension - cross 2000 mm
            table load 20 t
            T-slot - distance 125 mm
            T-slot - width 28 mm
            tool taper SK-50
            tool change unit 300 -fach
            column daylight 2350 mm
            coolant IKZ 60 bar
            w-axis 1500 mm
            dimensions of the machine ca. 12700 x 11000 x 6000 m
          Datasheet
          Request / Contact

          Travelling column milling machine

          used Milling machines Travelling column milling machine SORALUCE FP 6000


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-93 · Travelling column milling machine

          SORALUCE - FP 6000 - - 2009 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 6000 mm︱y-travel 2100 mm︱z-travel 1500 mm︱control HEIDENHAIN iTNC 530 ︱feed 2- 20 m/min︱spindle turning speed range 20 -4000 U/min︱table dimension - longitudinal 7000 mm︱table dimension - cross 2000 mm︱total power requirement 79 kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. 15 x 7 x 4,6 m︱
          The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min
            x-travel 6000 mm
            y-travel 2100 mm
            z-travel 1500 mm
            control HEIDENHAIN iTNC 530
            feed 2- 20 m/min
            spindle turning speed range 20 -4000 U/min
            table dimension - longitudinal 7000 mm
            table dimension - cross 2000 mm
            total power requirement 79 kW
            weight of the machine ca. 55 t
            dimensions of the machine ca. 15 x 7 x 4,6 m
            Description :
            The SORALUCE FP6000 is in very good condition.

            accessories as option:
            # clamping angle: 5'000.-€
            # Clamping cube: 2'000.-€
            # Div. tools & workbench: 2'000.-€

            Description:
            - CNC control: HEIDENHAIN ITNC 530

            Orthogonal milling head:
            - Tool holder: ISO 50, DIN69871 AD
            - Automatic tool clamping: Clamping force 20,000 N
            - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm
            - Tightening bolt: DIN 69872 form A
            - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane,
            270 positions front plane)
            270 positions front plane)
            - Diameter spindle bearing: 90
            - Sealing air: 0,7 bar

            Main drive:
            - Drive type: three-phase motor
            - Drive power: 100 % ED 32 kW

            spindle:
            - Spindle speed: 20 - 4000 rpm
            - Full power from: 340 rpm
            - Torque at 32 kW/S1: 910 Nm
            - Speed control: 2 ranges infinitely variable via star/delta connection

            Rapid traverse: max. 35000 mm/min


          Datasheet
          Request / Contact

          Universal Milling Machine

          used Milling machines Universal Milling Machine SIXIS


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-121 · Universal Milling Machine

          SIXIS - - - -

          Technical details
          x-travel 450 mm︱y-travel 175 mm︱z-travel 400 mm︱spindle turning speed range 60 - 2800 U/min︱total power requirement kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. 1,1 x 1 x 1,5 m︱
          Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand
            x-travel 450 mm
            y-travel 175 mm
            z-travel 400 mm
            spindle turning speed range 60 - 2800 U/min
            weight of the machine ca. 1 t
            dimensions of the machine ca. 1,1 x 1 x 1,5 m
            Description :
            Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Perfil del comerciante: MS Maschinenhandel GmbH

          Contactar con el comerciante



            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 - Señoras
            Austria
            + 43 547221907 "> + 43 547221907
            +43 54722190722
            info@ms-maschinen.at
            www.ms-maschinen.at

          Perfil del comerciante

          Grupo ProdEq - Socio de la industria.
          Comercio al por mayor de maquinaria metalmecánica.
           
          Vendemos y compramos:
          • Herramientas de máquina
          • maquinaria de fabricación de metal
          • equipo industrial usado
          • plantas completas
          Internacionalidad:
          Nuestra red de ventas internacional Proporciona acceso a los mercados globales de maquinaria usada / segunda mano.


          Directorio de maquinaria en línea:
          Busque y encuentre el equipo y la máquina herramienta que desee (CNC o no CNC) en nuestro directorio en línea. Todas las máquinas en venta se publican con información completa.

          Grandes proyectos - pequeños proyectos:
          Realizamos subastas y liquidaciones y realizamos las ventas de sus equipos excedentes. Por favor, póngase en contacto con nosotros sobre cualquier próxima venta de activos excedentes. Nosotros intercambiamos máquinas individuales al igual que plantas industriales completas.

          Especialidad:
          Independientemente si usted vende o compra máquinas o equipos usados. Base su decisión de venta en nuestra tasación y su decisión de compra en nuestro asesoramiento técnico.

          Más que de segunda mano:
          También negociamos una cartera seleccionada de Nuevo equipamiento, No dude en preguntarnos.


          Comercio y servicio:
          Pregunte por servicios postventa como desmontaje, revisiones, transporte, importación y exportación y financiación.

          Equipo de maquinaria:


          ProdEq Trading GmbH
          Reckholder 1, 9527 Niederhelfenschwil, Suiza


          ProdEq Maschinenhandel GmbH
          Unterdorf 34, 6532 Ladis, Austria


          ProdEq Germany GmbH
          Weberweg 2, 42499 Hückeswagen, Alemania


          Post-Venta Carreras SA
          Pol. Ind. Els Plans d'Arau, C / Nicolau Copèrnic 2, 08787 La Pobla de Claramunt, España


          Guerrieri srl
          Piazza Giosuè Carducci 6, 21100 Varese (VA), Italia


          ProdEq doo Trgovina z industrijskimi stroji
          Opekarniska 4, 2327 Race, Eslovenia


          Oficina de representación ProdEq Maschinenhandel GmbH
          16110 Nilüfer / Bursa, Türkei


          Otras oficinas de representación: Mexico
          Póngase en contacto con una de las oficinas de ProdEq anteriores para obtener más información.





          Find the best selection of used milling machines here
          Milling machines are practical for home or business

          Milling machines are exceptionally versatile tools used to machine a variety of materials, such as metals, woods and synthetics. Milling machines come in a range of sizes from small portable models for home hobbyists to large-scale industrial milling machines for factories. Whether you are looking for vertical or horizontal milling machines, manually operated or computer numerically controlled (CNC), you can find exactly what you need quickly and easily at LagerMaschinen.

          Which milling machine is the best for you?

          Milling machines are generally classified based on the main spindle's orientation. Horizontal milling machines are best suited to heavy materials, bulky or unconventional shaped work pieces, while vertical milling machines offer more advantages for design work and precision cutting. Although some prefer the level of control offered by manually or even mechanically operated machines, some businesses require the efficiency afforded by CNC machines. Regardless of which milling machines best suit your needs, you can find a wide array of used machines at LagerMaschinen.

          Online shopping has never been so easy

          LagerMaschinen offers users a number of distinct advantages. In this day and age, shopping online is a practical solution to strains on a busy schedule. You can browse quickly and easily online, anytime day or night, from the comfort of home or office. Also at LagerMaschinen, you can sort all your searches by price, location or specific brands to save yourself time and money in comparative shopping. From milling machines to grinders to drill presses, you can find the best selection of used machines on the web at LagerMaschinen.

          MS Maschinenhandel GmbH   6532 - Ladis Unterdorf 34 Österreich
          MS Maschinenhandel GmbH

          Unterdorf 34



          Contact Trader


            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 - Ladis
            Österreich
            +43 547221907
            +43 54722190722
            info@ms-maschinen.at
            www.ms-maschinen.at
            Contact person:

            USt.Id.Nr.: ATU 62723057
          Firmenbuchnummer: FN 280087 v
          USt.Id.Nr.: DE 257366940 / Steuernummer: 182 / 123 / 26816
          EORI-Nr.: ATEOS1000012994





          Machine category


          Abkantpresse - hydraulisch · Bandsäge · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Brennschneidemaschine · CNC Dreh- und Fräszentrum · Doppel-Gehrungsäge · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Feinstanzpresse · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Honmaschine - Innen - Horizontal · Kompressor · Kompressor und Druckluftaufbereitung · Koordinatenmeßmaschine · Langdrehautomat · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Messmaschine · Meßmittel · Portal - Bearbeitungszentrum · Portalfräsmaschine · Radialbohrmaschine · Spritzgiessmaschine bis 5000 KN · Tafelschere - mechanisch · Tuschierpresse · Wasserstrahlschneidanlage · Werkzeug Voreinstellgerät ·