,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Pillar Drilling Machine

          Machinelist: Pillar Drilling Machine


          Pillar Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine SBN Tischbohrmaschine SB 20 PB - 400V


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-8165122 · Pillar Drilling Machine

          SBN Tischbohrmaschine - SB 20 PB - 400V - - NEU -

          Technical details
          bore capacity in steel (diameter) 20 mm︱throat 180 mm︱bore stroke 80 mm︱ MK 2 ︱Motor output 24 ︱speeds 60 - 2580 U/min︱weight 70 kg︱
          Sanders part number: S81651228 Bench drill with keyless chuck - 400V - pole-changing motor - Run right + left
            bore capacity in steel (diameter. 20 mm
            throat 180 mm
            bore stroke 80 mm
            MK 2
            Motor output 24
            speeds 60 - 2580 U/min
            weight 70 kg
            Description :
            Sanders part number: S81651228

            Bench drill with keyless chuck
            - 400V
            - pole-changing motor
            - Run right + left


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine OPTIdrill D33 Pro Aktions-Set


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100028 · Pillar Drilling Machine

          OPTIdrill - D33 Pro Aktions-Set - - NEU -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 254 mm︱bore stroke 120 mm︱ 4 ︱Motor output 9 ︱speeds 120 - 1810 U/min︱column diameter 92 mm︱table surface area 475 x 425 mm︱total power requirement 1,1 kW︱dimensions 915 x 450 x 1705 mm︱weight ca. 135 kg︱
          Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice
            bore capacity in steel (diameter. 30 mm
            throat 254 mm
            bore stroke 120 mm
            4
            Motor output 9
            speeds 120 - 1810 U/min
            column diameter 92 mm
            table surface area 475 x 425 mm
            total power requirement 1,1 kW
            dimensions 915 x 450 x 1705 mm
            weight ca. 135 kg
            Description :
            Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET
            With an electronically controllable drive in a modern design

            * Industrial engine
            * Quiet running spindle thanks to new spindle design
            * Machine operation with safety electronics in 24 V direct current
            * Guaranteed concentricity = 0.02 mm in the measured drilling spindle
            * Clockwise/counterclockwise rotation
            * Precision spindle bore
            * Control panel with user-friendly, dirt and water resistant
            * Membrane keyboard
            * RPM display
            * Separate emergency stop button
            * Tapping function
            * Precisely crafted, stable drill table with diagonal T-slots
            with all-round cooling water channel, can be tilted sideways by ±45° and
            rotated by 360°
            * Drilling depth stop
            * LED machine light integrated in the drill head
            * V-belt cover with safety switch
            * Thick-walled steel column for high power absorption and stability
            * Solid, large base plate with T-slots
            * Execution of the entire machine

            Scope of delivery:
            - Keyless drill chuck 0 - 16 mm
            - T-Nuts
            -expectors
            - Operating tool
            - BMP 160 machine vice


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010591 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          40 mm︱ M 24M 30MK 4 ︱bore stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 514x360 mm︱ 2 x 14 x 224 mm︱ 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection
            40 mm
            M 24
            M 30
            MK 4
            bore stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            514x360 mm
            2 x 14 x 224 mm
            117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HM MACHINERY Tischbohrmaschine SBM 28 B


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100021 · Pillar Drilling Machine

          HM MACHINERY Tischbohrmaschine - SBM 28 B - - NEU -

          Technical details
          bore capacity in steel (diameter) 28 mm︱throat 250 mm︱bore stroke 130 mm︱morse taper 3 MK︱table: 380 x 380 mm︱turning speeds 75 - 3000 U/min︱engine output 1,1 kW︱column diameter 98 mm︱thread M16 ST60︱dimensions 700 x 450 x 1500 mm︱weight 200 kg︱
          - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.
            bore capacity in steel (diameter. 28 mm
            throat 250 mm
            bore stroke 130 mm
            morse taper 3 MK
            table: 380 x 380 mm
            turning speeds 75 - 3000 U/min
            engine output 1,1 kW
            column diameter 98 mm
            thread M16 ST60
            dimensions 700 x 450 x 1500 mm
            weight 200 kg
            Description :
            - Height adjustable and angle adjustable table
            - Movable work table
            - Prepared for cooling system
            - Powerful engine
            - 3 hand levers for drilling feed
            - Safety shield with limit switch
            - Separate emergency stop
            - Built-in working lights
            - Incl. drill chuck 16mm - B16
            - Built-in automatic thread cutting.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine OPTIdrill Tischbohrmaschine D 23Pro (400 V)


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7368 · Pillar Drilling Machine

          OPTIdrill Tischbohrmaschine - D 23Pro (400 V) - - NEU -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 180 mm︱bore stroke 80 mm︱ 2 ︱Motor output 12 ︱speeds 200 - 2440 U/min︱
          Bench drill / 3020625TSET - Heavy execution of the whole machine - Very smooth running thanks to the new spindle design - industrial engine - Separate emergency stop impact switch - drilling depth stop - LED machine light integrated in the drill head - Precisely machined, stable drilling table with diagonal T-slots with a circumferential cooling water channel - Drilling table can be tilted ± 45 ° and rotated 360 ° - V-belt cover with safety switch - Precision spindle bore - Machine operation of safety electronics in 24 V DC voltage - Guaranteed concentricity = 0.02 mm measured in the drilling spindle - Thick-walled steel column for high force absorption and stability - Solid, large base plate with T-slots scope of delivery - Keyless chuck 0 - 16 mm - T-nuts - Expeller - Adapter MK 3-B16 - operating tool - BMP 100 machine vice
            bore capacity in steel (diameter. 25 mm
            throat 180 mm
            bore stroke 80 mm
            2
            Motor output 12
            speeds 200 - 2440 U/min
            Description :
            Bench drill / 3020625TSET

            - Heavy execution of the whole machine
            - Very smooth running thanks to the new spindle design
            - industrial engine
            - Separate emergency stop impact switch
            - drilling depth stop
            - LED machine light integrated in the drill head
            - Precisely machined, stable drilling table with diagonal T-slots with a
            circumferential cooling water channel
            - Drilling table can be tilted ± 45 ° and rotated 360 °
            - V-belt cover with safety switch
            - Precision spindle bore
            - Machine operation of safety electronics in 24 V DC voltage
            - Guaranteed concentricity = 0.02 mm measured in the drilling spindle
            - Thick-walled steel column for high force absorption and stability
            - Solid, large base plate with T-slots

            scope of delivery
            - Keyless chuck 0 - 16 mm
            - T-nuts
            - Expeller
            - Adapter MK 3-B16
            - operating tool
            - BMP 100 machine vice


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 4/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010528 · Pillar Drilling Machine

          ALZMETALL - AX 4/SV - - Neu -

          Technical details
          55 mm︱ M42M56MK 4 ︱spindle turning speed - stepless 70-2400 U/min︱spindle stroke 140 mm︱throat 300 mm︱column diameter 145 mm︱ 615x430 mm︱distance spindle /table min./max. 150/735 mm︱ 2 x 14 x 224 mm︱feed 0,1 + 0,3 mm/U︱Machine height 1850 mm︱weight 380 kg︱engine output 3 kW︱
          Standard equipment: - Main switch with motor protection switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed)
            55 mm
            M42
            M56
            MK 4
            spindle turning speed - stepless 70-2400 U/min
            spindle stroke 140 mm
            throat 300 mm
            column diameter 145 mm
            615x430 mm
            distance spindle /table min./max. 150/735 mm
            2 x 14 x 224 mm
            feed 0,1 + 0,3 mm/U
            Machine height 1850 mm
            weight 380 kg
            engine output 3 kW
            Description :
            Standard equipment:
            - Main switch with motor protection switch lockable
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads / min., (Tapping power dependent on spindle speed)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10097 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          40 mm︱ M 24M 30MK 3 ︱bore stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 514x360 mm︱ 2 x 14 x 224 mm︱ 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection
            40 mm
            M 24
            M 30
            MK 3
            bore stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            514x360 mm
            2 x 14 x 224 mm
            117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 2 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010572 · Pillar Drilling Machine

          ALZMETALL - AX 2 iTRONIC - - NEU -

          Technical details
          23 mm︱threading in St 60 M14 ︱threading in GG 20 M16MK 2125-2400 U/min.︱spindle stroke 100 mm︱throat 250 mm︱column diameter 90 mm︱ 370x300 mm︱ 2x14x160 mm︱distance spindle /table min./max. 140/670 mm︱ Handkurbel ︱feed von Hand ︱height of the machine 1770 mm︱weight of the machine ca. 180 kg︱
            23 mm
            threading in St 60 M14
            threading in GG 20 M16
            MK 2
            125-2400 U/min.
            spindle stroke 100 mm
            throat 250 mm
            column diameter 90 mm
            370x300 mm
            2x14x160 mm
            distance spindle /table min./max. 140/670 mm
            Handkurbel
            feed von Hand
            height of the machine 1770 mm
            weight of the machine ca. 180 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL Tischbohrmaschine EKM - 25


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100026 · Pillar Drilling Machine

          IBERDRILL - Tischbohrmaschine EKM - 25 - - NEU -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat - mm︱bore stroke 120 mm︱ MK 310manuell 245 – 4.100 U/min︱ manuell über Griffkreuz300 x 270 mm︱ 100 mm︱ 250 mm︱ 0,71 / 1,35 kW︱ 0,23 t︱ 700 x 500 x 1400 mm︱
          Bench drilling machine with V-belt drive and moveable intermediate table Max. thread cutting capacity for steel (St 60) M 18 - V-belt drive with 5x stepped pulleys and quick-release device - 10 fixed speeds - manual feed via grip cross - Scale with adjustable drilling depth - automatic tool ejector - Movable intermediate table, fixed drill head - Machine base plate with machined workpiece support surface - integrated machine light - EMERGENCY STOP button - Right/left rotation switch - High/low speed switch - Chip protection device with microswitch monitoring - thermal magnetic motor protection - Switching electronics in the low-voltage range - Color signal gray (RAL 7004) and graphite black (RAL 9011) - CE conformity and marking - Documentation, operation and maintenance manual
            bore capacity in steel (diameter. 25 mm
            throat - mm
            bore stroke 120 mm
            MK 3
            10
            manuell 245 – 4.100 U/min
            manuell über Griffkreuz
            300 x 270 mm
            100 mm
            250 mm
            0,71 / 1,35 kW
            0,23 t
            700 x 500 x 1400 mm
            Description :
            Bench drilling machine with V-belt drive and moveable intermediate table

            Max. thread cutting capacity for steel (St 60) M 18

            - V-belt drive with 5x stepped pulleys and quick-release device
            - 10 fixed speeds
            - manual feed via grip cross
            - Scale with adjustable drilling depth
            - automatic tool ejector
            - Movable intermediate table, fixed drill head
            - Machine base plate with machined workpiece support surface
            - integrated machine light
            - EMERGENCY STOP button
            - Right/left rotation switch
            - High/low speed switch
            - Chip protection device with microswitch monitoring
            - thermal magnetic motor protection
            - Switching electronics in the low-voltage range
            - Color signal gray (RAL 7004) and graphite black (RAL 9011)
            - CE conformity and marking
            - Documentation, operation and maintenance manual


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 34/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010669 · Pillar Drilling Machine

          ALZMETALL - AB 34/SV - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱ MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱Machine height 1865 mm︱total power requirement 1,4/2,2 kW︱
          Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection class IP 54 - Motor insulation class "F" - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads/min., (Tapping power dependent on spindle speed) Pos. 25. Coolant device B, consisting of: separate container (33 l), pump with Motor protection switch, complete fitting
            34 mm
            40 mm
            40 mm
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            Machine height 1865 mm
            total power requirement 1,4/2,2 kW
            Description :
            Standard equipment:
            - Electromagnetic feed clutch with overload protection and electrical
            Cross Handle Switches
            - Main switch lockable
            - Motor protection switch
            - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel
            - Speed adjustment stepless
            - Speed display digital
            - Protection class IP 54
            - Motor insulation class "F"
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads/min., (Tapping power dependent on spindle speed)

            Pos. 25.
            Coolant device B, consisting of: separate container (33 l), pump with
            Motor protection switch, complete fitting


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ARBOGA A4008M


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010602 · Pillar Drilling Machine

          ARBOGA - A4008M - - NEU -

          Technical details
          bore capacity in steel (diameter) 40 mm︱bore stroke 190 mm︱turning speeds 50-1800 U/min︱Short spindle MK 4 ︱Table dimensions 500x400 mm︱total power requirement 2,2 kW︱weight of the machine ca. 330 kg︱dimensions of the machine ca. 670x500x2120 mm︱
            bore capacity in steel (diameter. 40 mm
            bore stroke 190 mm
            turning speeds 50-1800 U/min
            Short spindle MK 4
            Table dimensions 500x400 mm
            total power requirement 2,2 kW
            weight of the machine ca. 330 kg
            dimensions of the machine ca. 670x500x2120 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 3/S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010623 · Pillar Drilling Machine

          ALZMETALL - AX 3/S - - NEU -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30 ︱Short spindle MK 3 ︱spindle stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2x14x224 mm︱distance spindle /table 117/701 mm︱Spindle Speed 160-2250 U/min.︱weight 260 kg︱
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            Short spindle MK 3
            spindle stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2x14x224 mm
            distance spindle /table 117/701 mm
            Spindle Speed 160-2250 U/min.
            weight 260 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 30/S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010651 · Pillar Drilling Machine

          ALZMETALL - Alzstar 30/S - - Neu -

          Technical details
          Drilling capacity in St 60 30 mm︱threading in St 60 M 16 ︱threading in GG 20 M 20 ︱Short spindle MK 3 ︱bore stroke 140 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 132/724 mm︱feed Hand ︱spindle turning speed range 225-4300 UpM︱total power requirement 1,0/1,6 kW︱height of the machine 1790 mm︱weight of the machine ca. 260 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection
            Drilling capacity in St 60 30 mm
            threading in St 60 M 16
            threading in GG 20 M 20
            Short spindle MK 3
            bore stroke 140 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 132/724 mm
            feed Hand
            spindle turning speed range 225-4300 UpM
            total power requirement 1,0/1,6 kW
            height of the machine 1790 mm
            weight of the machine ca. 260 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 34/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010408 · Pillar Drilling Machine

          ALZMETALL - AB 34/SV - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱ MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱Machine height 1865 mm︱total power requirement 1,4/2,2 kW︱
          Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection class IP 54 - Motor insulation class "F" - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads/min., (Tapping power dependent on spindle speed) Pos. 25. Coolant device B, consisting of: separate container (33 l), pump with Motor protection switch, complete fitting
            34 mm
            40 mm
            40 mm
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            Machine height 1865 mm
            total power requirement 1,4/2,2 kW
            Description :
            Standard equipment:
            - Electromagnetic feed clutch with overload protection and electrical
            Cross Handle Switches
            - Main switch lockable
            - Motor protection switch
            - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel
            - Speed adjustment stepless
            - Speed display digital
            - Protection class IP 54
            - Motor insulation class "F"
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads/min., (Tapping power dependent on spindle speed)

            Pos. 25.
            Coolant device B, consisting of: separate container (33 l), pump with
            Motor protection switch, complete fitting


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 3 iTRONIC-V


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100016 · Pillar Drilling Machine

          ALZMETALL - AX 3 iTRONIC-V - - NEU -

          Technical details
          bore capacity in steel (diameter) 40,0 mm︱throat 293 mm︱bore stroke 120 mm︱morse taper 3 MK︱table: 514 x 360 mm︱turning speeds 80 - 1.125 U/min︱engine output 1,0 / 1,6 kW︱column diameter 115 mm︱thread M24 ST60︱thread M30 GG20︱feed 0,10 + 0,20 mm/U︱weight 270 kg︱Machine height 1840 mm︱
          ** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.
            bore capacity in steel (diameter. 40,0 mm
            throat 293 mm
            bore stroke 120 mm
            morse taper 3 MK
            table: 514 x 360 mm
            turning speeds 80 - 1.125 U/min
            engine output 1,0 / 1,6 kW
            column diameter 115 mm
            thread M24 ST60
            thread M30 GG20
            feed 0,10 + 0,20 mm/U
            weight 270 kg
            Machine height 1840 mm
            Description :
            ** NEW ALZMETALL MODEL RANGE **

            7 "TFT - LCD display with touch function:
            * Spindle speed setpoint
            * Actual speed display
            * Integrated drilling depth display
            * with touch zero point transfer
            * Virtual drilling depth scale in the display
            * Machine status displays and warnings in the display
            * Service information
            * Selectable user language: DE / EN / FR / ES / IT / NL / RU.

            Furnishing:
            - Thread cutting device
            * for thread cutting with a stop
            * max. 6 threads / min (thread cutting performance depends on the spindle speed)
            * Thread depth adjustable via depth stop
            * in the TFT - LCD display (3 tools).
            - Infinitely variable speed setting by means of an adjusting lever
            - automatic spindle feed with feed overload protection
            - Spindle protection with electrical fuse
            - Three separate buttons for clockwise rotation - counterclockwise rotation -
            stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black
            - Machine oil first filling: oil bottle, loose delivery

            including special accessories:
            - 25. Coolant system B.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 3 iTRONIC V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010589 · Pillar Drilling Machine

          ALZMETALL - AX 3 iTRONIC V - - NEU -

          Technical details
          40 mm︱threading in St 60 M24 ︱threading in GG 20 M30MK 3160 - 2250 U/min.︱spindle stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 514 x 360 mm︱ 2 x 14 x 224 mm︱distance spindle /table min. 117 / max. 701 mm︱feed 0,1 + 0,2 mm/U︱height of the machine ca. 1840 mm︱weight of the machine ca. ca. 260 kg︱
            40 mm
            threading in St 60 M24
            threading in GG 20 M30
            MK 3
            160 - 2250 U/min.
            spindle stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            514 x 360 mm
            2 x 14 x 224 mm
            distance spindle /table min. 117 / max. 701 mm
            feed 0,1 + 0,2 mm/U
            height of the machine ca. 1840 mm
            weight of the machine ca. ca. 260 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ZIMMER BMS 32 V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010517 · Pillar Drilling Machine

          ZIMMER - BMS 32 V - - Neu -

          Technical details
          32 ︱bore stroke 125 mm︱Short spindle MK 3 ︱throat 210 mm︱Machine table - usable table surface 390x390 mm︱table load 65 kg︱spindle turning speed range 150-2.500 UpM︱Power requirement 16 A︱total power requirement 1,5 kW︱Overall size 750x450x1745 mm︱weight of the machine ca. 187 kg︱
            32
            bore stroke 125 mm
            Short spindle MK 3
            throat 210 mm
            Machine table - usable table sur. 390x390 mm
            table load 65 kg
            spindle turning speed range 150-2.500 UpM
            Power requirement 16 A
            total power requirement 1,5 kW
            Overall size 750x450x1745 mm
            weight of the machine ca. 187 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 34 iTRONIC AUTODIGIT


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010551 · Pillar Drilling Machine

          ALZMETALL - AB 34 iTRONIC AUTODIGIT - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱total power requirement 1,4/2,2 kW︱Machine height 1865 mm︱weight 470 kg︱
          Standard equipment: 7 "" TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch - Machine oil first filling: oil bottle, loose delivery Pos. 20.5 Foot switch, in addition to the thread cutting device for switching the Spindle direction of rotation in the process Pos. 37.5 Technology computer in the display. The technology computer guides you through the Machining task. Determination of the cutting data using the following parameters: Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
            34 mm
            40 mm
            40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            total power requirement 1,4/2,2 kW
            Machine height 1865 mm
            weight 470 kg
            Description :
            Standard equipment:
            7 "" TFT LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6th
            Thread / min (thread cutting performance dependent on spindle speed), thread depth
            adjustable via depth stop and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch
            - Machine oil first filling: oil bottle, loose delivery

            Pos. 20.5
            Foot switch, in addition to the thread cutting device for switching the
            Spindle direction of rotation in the process

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the
            Machining task. Determination of the cutting data using the following parameters:
            Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HM MACHINERY SBM 28 F


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100027 · Pillar Drilling Machine

          HM MACHINERY - SBM 28 F - - NEU -

          Technical details
          bore capacity in steel (diameter) 28 mm︱throat 250 mm︱bore stroke 130 mm︱morse taper 3 MK︱table: 380 x 380 mm︱turning speeds 75 - 3200 U/min︱thread M16 ST60︱column diameter 98 mm︱engine output 1,1 kW︱dimensions 800 x 500 x 2000 mm︱weight 210 kg︱
          - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.
            bore capacity in steel (diameter. 28 mm
            throat 250 mm
            bore stroke 130 mm
            morse taper 3 MK
            table: 380 x 380 mm
            turning speeds 75 - 3200 U/min
            thread M16 ST60
            column diameter 98 mm
            engine output 1,1 kW
            dimensions 800 x 500 x 2000 mm
            weight 210 kg
            Description :
            - automatic drill feeds (magnetic clutch)
            - Height adjustable and angle adjustable table
            - Movable work table
            - Integrated cooling system
            - Powerful engine
            - 3 hand levers for drilling feed
            - Safety shield with limit switch
            - Separate emergency stop
            - Built-in working lights
            - Incl. drill chuck 16mm - B16
            - Built-in automatic thread cutting.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ZIMMER BMS 32


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010518 · Pillar Drilling Machine

          ZIMMER - BMS 32 - - Neu -

          Technical details
          32 ︱bore stroke 125 mm︱Short spindle MK 3 ︱throat 210 mm︱Machine table - usable table surface 390x390 mm︱table load 65 kg︱spindle turning speed range 105-2.650 UpM︱total power requirement 0,75 kW︱Overall size 750x450x1745 mm︱weight of the machine ca. 192 kg︱
            32
            bore stroke 125 mm
            Short spindle MK 3
            throat 210 mm
            Machine table - usable table sur. 390x390 mm
            table load 65 kg
            spindle turning speed range 105-2.650 UpM
            total power requirement 0,75 kW
            Overall size 750x450x1745 mm
            weight of the machine ca. 192 kg
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 30/S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010227 · Pillar Drilling Machine

          ALZMETALL - Alzstar 30/S - - Neu -

          Technical details
          Drilling capacity in St 60 30 mm︱threading in St 60 M 16 ︱threading in GG 20 M 20 ︱Short spindle MK 3 ︱bore stroke 140 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 132/724 mm︱feed Hand ︱spindle turning speed range 225-4300 UpM︱height of the machine 1790 mm︱total power requirement 1,0/1,6 kW︱weight of the machine ca. 260 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection
            Drilling capacity in St 60 30 mm
            threading in St 60 M 16
            threading in GG 20 M 20
            Short spindle MK 3
            bore stroke 140 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 132/724 mm
            feed Hand
            spindle turning speed range 225-4300 UpM
            height of the machine 1790 mm
            total power requirement 1,0/1,6 kW
            weight of the machine ca. 260 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 34 iTRONIC


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100018 · Pillar Drilling Machine

          ALZMETALL - AB 34 iTRONIC - - NEU -

          Technical details
          bore capacity in steel (diameter) 34,0 mm︱throat 300 mm︱bore stroke 160 mm︱morse taper 4 MK︱table: 615 x 430 mm︱turning speeds 100 - 1.800 U/min︱engine output 1,4 / 2,2 kW︱column diameter 145 mm︱thread M24 ST60︱thread M30 GG20︱feed 0,1-0,2-0,3-0,4 mm/U︱weight 470 kg︱Machine height 1865 mm︱
          ** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base
            bore capacity in steel (diameter. 34,0 mm
            throat 300 mm
            bore stroke 160 mm
            morse taper 4 MK
            table: 615 x 430 mm
            turning speeds 100 - 1.800 U/min
            engine output 1,4 / 2,2 kW
            column diameter 145 mm
            thread M24 ST60
            thread M30 GG20
            feed 0,1-0,2-0,3-0,4 mm/U
            weight 470 kg
            Machine height 1865 mm
            Description :
            ** NEW ALZMETALL MODEL RANGE **

            7 "TFT - LCD display with touch function:
            * Spindle speed setpoint
            * Actual speed display
            * Integrated drilling depth display
            * with touch zero point transfer
            * Virtual drilling depth scale in the display
            * Machine status displays and warnings in the display
            * Service information
            * Selectable user language: DE / EN / FR / ES / IT / NL / RU.

            Furnishing:
            - Thread cutting device
            * for thread cutting with a stop
            * max. 6 threads / min (thread cutting performance depends on the spindle speed)
            * Thread depth adjustable via depth stop
            * in the TFT - LCD display (3 tools).
            - Infinitely variable speed setting by means of an adjusting lever
            - Electromagnetic feed clutch
            * with overload protection and electrical
            * Comfort cross-handle switch
            * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev
            - Spindle protection with electrical fuse
            - Three separate buttons for clockwise rotation
            - counterclockwise rotation - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black
            - Machine oil first filling: oil bottle, loose delivery

            including special accessories:
            - 12. LED machine light
            - 24. Coolant system A * in the machine base


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 3 iTRONIC V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010593 · Pillar Drilling Machine

          ALZMETALL - AX 3 iTRONIC V - - NEU -

          Technical details
          40 mm︱threading in St 60 M24 ︱threading in GG 20 M30MK 3 ︱spindle stroke 120 mm︱ 160 - 2250 U/min.︱throat 293 mm︱column diameter 115 mm︱ 514 x 360 mm︱ 2 x 14 x 224 mm︱distance spindle /table min. 117 / max. 701 mm︱feed 0,1 + 0,2 mm/U︱height of the machine ca. 1840 mm︱weight of the machine ca. ca. 260 kg︱
          Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6thread/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Feed overload protection - Machine oil initial filling; oil bottle, supplied loose - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black ***SPECIAL EQUIPMENT*** Item 20.5 FOOT SWITCH in addition to the SPINDLE-CUTTING DEVICE, for switching the direction of spindle rotation during the process Item 24 Coolant device A, consisting of: Coolant base plate with machined workpiece support surface 320x320 mm and 2 T-slots, pump with motor protection switch, complete fitting, non-return valve, Switching functions for coolant supply
            40 mm
            threading in St 60 M24
            threading in GG 20 M30
            MK 3
            spindle stroke 120 mm
            160 - 2250 U/min.
            throat 293 mm
            column diameter 115 mm
            514 x 360 mm
            2 x 14 x 224 mm
            distance spindle /table min. 117 / max. 701 mm
            feed 0,1 + 0,2 mm/U
            height of the machine ca. 1840 mm
            weight of the machine ca. ca. 260 kg
            Description :
            Standard equipment:
            - 7" TFT LCD display with touch function:
            * Manual input of spindle speed set value
            * Actual speed display
            * Integrated drilling depth display with touch zero point transfer
            * Virtual drilling depth scale in the display
            * Machine status indicators and warnings on the display
            * Service information
            * Selectable operating language: DE/EN/FR/ES/IT/NL/RU
            - Thread cutting device, for thread cutting with stop, max.
            6thread/min (thread cutting capacity depending on spindle speed), thread depth
            adjustable via depth stop and on the TFT LCD display (4 tools)
            - Infinitely variable speed adjustment via adjustment lever
            - Spindle protection with electrical fuse
            - Three separate buttons for clockwise rotation - anticlockwise rotation - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Clockwise and counter-clockwise rotation via contactor control
            - Control voltage 24 V, protection class IP 54
            - Feed overload protection
            - Machine oil initial filling; oil bottle, supplied loose
            - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black

            ***SPECIAL EQUIPMENT***

            Item 20.5
            FOOT SWITCH in addition to the SPINDLE-CUTTING DEVICE,
            for switching the direction of spindle rotation during the process

            Item 24
            Coolant device A, consisting of:
            Coolant base plate with machined workpiece support surface 320x320 mm and 2
            T-slots, pump with motor protection switch, complete fitting, non-return valve,
            Switching functions for coolant supply


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL AZ 34


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-1915 · Pillar Drilling Machine

          IBERDRILL - AZ 34 - - NEU -

          Technical details
          bore capacity in steel (diameter) 34 mm︱throat 300 mm︱bore stroke 150 mm︱bore capacity in cast iron (diameter) 40 mm︱thread capacity M 27 ︱spindle taper MT 4 ︱spindle speeds: Stufenlos 100 - 2000 U/min︱column diameter 125 mm︱automatic feeds 3 / 0,1 - 0,2 - 1,3 ︱table: 400 x 420 mm︱Drive Keilriemen ︱total power requirement 3 kW︱weight of the machine ca. 360 kg︱dimensions of the machine ca. 2,3 x 0,6x 1,1 m︱
          - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant system - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking
            bore capacity in steel (diameter. 34 mm
            throat 300 mm
            bore stroke 150 mm
            bore capacity in cast iron (diam. 40 mm
            thread capacity M 27
            spindle taper MT 4
            spindle speeds: Stufenlos 100 - 2000 U/min
            column diameter 125 mm
            automatic feeds 3 / 0,1 - 0,2 - 1,3
            table: 400 x 420 mm
            Drive Keilriemen
            total power requirement 3 kW
            weight of the machine ca. 360 kg
            dimensions of the machine ca. 2,3 x 0,6x 1,1 m
            Description :
            - Drilling machine of circular column feed automaticmechanical
            - Drive by electronic wide V-belt
            - Spindle taper: CM 4
            - Stepless speed adjustment with frequency converter
            - Potentiometer for speed adjustment
            - digital speed display
            - Automatic feed reversal when threading
            - Scale with adjustable drilling depth - automatic tool ejector
            - Push button for EMERGENCY STOP switch for right/left rotation
            - Electronic control integrated in the drill head - integrated coolant system
            - Machine light - height-adjustable chip protection disc with micro switch
            - fixed table
            - CE marking


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          •   
          •