,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Bar Automatic Lathe - Single Spindle

          Machinelist: Bar Automatic Lathe - Single Spindle


          Bar Automatic Lathe - Single Spindle

          used Lathes Bar Automatic Lathe - Single Spindle INDEX E 42


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-5596 · Bar Automatic Lathe - Single Spindle

          INDEX - E 42 - - 1972 -

          Technical details

          2-turret with threading Lang rotator 4-cut-copy facility Sauter Material stop Pliers and power chucks Rotating magnetic field-feeding device oil hood several tools Machine is in very good condition.
            Description :
            2-turret with threading
            Lang rotator
            4-cut-copy facility Sauter
            Material stop
            Pliers and power chucks
            Rotating magnetic field-feeding device
            oil hood
            several tools
            Machine is in very good condition.
          used Lathes Bar Automatic Lathe - Single Spindle INDEX GE 65


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03110 · Bar Automatic Lathe - Single Spindle

          INDEX - GE 65 - - - Siemens

          Technical details

          used Lathes Bar Automatic Lathe - Single Spindle INDEX GS30


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03410 · Bar Automatic Lathe - Single Spindle

          INDEX - GS30 - - - Index

          Technical details
          spindle passage 34 mm︱turning length . mm︱bore depth . mm︱Control Index ︱type S 3 ︱live tooling ︱bar loader Sameca ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle passage 34 mm
            turning length . mm
            bore depth . mm
            Control Index
            type S 3
            bar loader Sameca
          used Lathes Bar Automatic Lathe - Single Spindle MAS KOVOSVIT Optimat A22 (44)


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8471 · Bar Automatic Lathe - Single Spindle

          MAS KOVOSVIT - Optimat A22 (44) - - 2000 -

          Technical details

          Single-Spindle-Bar Automatic Lathe MAS KOVOSVIT - Optimat A22 - incl. IEMCA Boss 432 Bar-Feeder
            Description :
            Single-Spindle-Bar Automatic Lathe
            MAS KOVOSVIT - Optimat A22

            - incl. IEMCA Boss 432 Bar-Feeder
          used Lathes Bar Automatic Lathe - Single Spindle MAS KOVOSVIT Optimat A22 (45)


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8472 · Bar Automatic Lathe - Single Spindle

          MAS KOVOSVIT - Optimat A22 (45) - - 2000 -

          Technical details

          Single-Spindle-Bar Automatic Lathe MAS KOVOSVIT - Optimat A22 - incl. IEMCA Boss 332 Bar-Feeder
            Description :
            Single-Spindle-Bar Automatic Lathe
            MAS KOVOSVIT - Optimat A22

            - incl. IEMCA Boss 332 Bar-Feeder
          used Lathes Bar Automatic Lathe - Single Spindle TRAUB A25


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-19473 · Bar Automatic Lathe - Single Spindle

          TRAUB - A25 - - 1990 (Überhol. 1999) -

          Technical details
          spindle passage 25 mm︱turning length 70 mm︱bore depth 50 mm︱turning speeds 550 - 4000 U/min︱tool turret (Reitstock) 4 Pos.︱total power requirement 2,0 kW︱weight of the machine ca. 600 kg︱dimensions of the machine ca. 1,90 x 1,00 x 1,80 m︱
          - Serial No.: 6105/9 - Reconditioned 1999 (Fa. Wachtler/Esslingen) - Bar feeder IEMCA AS 325 / 37 CT (bar length = 3,00 m, dia. 25 mm) - 4 pos. turret for drilling operation - 2 cross slides, 1 double vertical slide - various tool holders, collets - various cam discs, feed gears - Manuals, wiring diagram
            spindle passage 25 mm
            turning length 70 mm
            bore depth 50 mm
            turning speeds 550 - 4000 U/min
            tool turret (Reitstock) 4 Pos.
            total power requirement 2,0 kW
            weight of the machine ca. 600 kg
            dimensions of the machine ca. 1,90 x 1,00 x 1,80 m
            Description :
            - Serial No.: 6105/9
            - Reconditioned 1999 (Fa. Wachtler/Esslingen)
            - Bar feeder IEMCA AS 325 / 37 CT
            (bar length = 3,00 m, dia. 25 mm)
            - 4 pos. turret for drilling operation
            - 2 cross slides, 1 double vertical slide
            - various tool holders, collets
            - various cam discs, feed gears
            - Manuals, wiring diagram
          used Lathes Bar Automatic Lathe - Single Spindle TRAUB TD 16


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-IMZ5665 · Bar Automatic Lathe - Single Spindle

          TRAUB - TD 16 - - 1983/2007 -

          Technical details
          spindle passage 22 mm︱turning length 70 mm︱round material 16 mm︱turning speeds 850-8000 U/min︱power capacity 2,2 kW︱total power requirement kW︱weight of the machine ca. 1,0 t︱dimensions of the machine ca. 1,7x0,8x1,6 m︱
          The machine was overhauled 2007th The control shaft with worm wheel, the worm shaft, and all the guide shafts were renewed. The pilot shaft, the main spindle, the turret, the vertical and lateral support and the protective hood has been overhauled. The gearbox was replaced by a frequency-controlled drive. Amenities: - Thread milling and multi edge turn unit - 6-station turret - turret for drive tools - cross drilling unit - bar load magazine IEMCA CS 116 with extensive accessories (tool holders, curves, collets, etc)
            spindle passage 22 mm
            turning length 70 mm
            round material 16 mm
            turning speeds 850-8000 U/min
            power capacity 2,2 kW
            weight of the machine ca. 1,0 t
            dimensions of the machine ca. 1,7x0,8x1,6 m
            Description :

            The machine was overhauled 2007th The control shaft with worm wheel, the worm shaft, and all the guide shafts were renewed. The pilot shaft, the main spindle, the turret, the vertical and lateral support and the protective hood has been overhauled. The gearbox was replaced by a frequency-controlled drive.
            Amenities:
            - Thread milling and multi edge turn unit
            - 6-station turret
            - turret for drive tools
            - cross drilling unit
            - bar load magazine IEMCA CS 116
            with extensive accessories (tool holders, curves, collets, etc)
          used Lathes Bar Automatic Lathe - Single Spindle TRAUB TD 16


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-5665 · Bar Automatic Lathe - Single Spindle

          TRAUB - TD 16 - - 1983/2007 -

          Technical details
          spindle passage 22 mm︱turning length 70 mm︱round material 16 mm︱turning speeds 850-8000 U/min︱power capacity 2,2 kW︱total power requirement kW︱weight of the machine ca. 1,0 t︱dimensions of the machine ca. 1,7x0,8x1,6 m︱
          The machine was overhauled 2007th The control shaft with worm wheel, the worm shaft, and all the guide shafts were renewed. The pilot shaft, the main spindle, the turret, the vertical and lateral support and the protective hood has been overhauled. The gearbox was replaced by a frequency-controlled drive. Amenities: - Thread milling and multi edge turn unit - 6-station turret - turret for drive tools - cross drilling unit - bar load magazine IEMCA CS 116 with extensive accessories (tool holders, curves, collets, etc)
            spindle passage 22 mm
            turning length 70 mm
            round material 16 mm
            turning speeds 850-8000 U/min
            power capacity 2,2 kW
            weight of the machine ca. 1,0 t
            dimensions of the machine ca. 1,7x0,8x1,6 m
            Description :

            The machine was overhauled 2007th The control shaft with worm wheel, the worm shaft, and all the guide shafts were renewed. The pilot shaft, the main spindle, the turret, the vertical and lateral support and the protective hood has been overhauled. The gearbox was replaced by a frequency-controlled drive.
            Amenities:
            - Thread milling and multi edge turn unit
            - 6-station turret
            - turret for drive tools
            - cross drilling unit
            - bar load magazine IEMCA CS 116
            with extensive accessories (tool holders, curves, collets, etc)
          used Lathes Bar Automatic Lathe - Single Spindle TRAUB TD 26


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-IMZ5666 · Bar Automatic Lathe - Single Spindle

          TRAUB - TD 26 - - 1989/2001 -

          Technical details
          spindle passage 26 mm︱turning length 70 mm︱turning speeds 4750 U/min︱total power requirement kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. 1,9x1,0x1,8 m︱
          The machine was overhauled in 2001 Amenities: - Thread milling and Swarf conveyor - 6-station turret - Drive mechanism for power tools on the turret - Chip conveyor Kramer - Bar load magazine HAGENUK LM / FN with extensive accessories (tool holders, curves, collets, etc)
            spindle passage 26 mm
            turning length 70 mm
            turning speeds 4750 U/min
            weight of the machine ca. 1 t
            dimensions of the machine ca. 1,9x1,0x1,8 m
            Description :
            The machine was overhauled in 2001

            Amenities:
            - Thread milling and Swarf conveyor
            - 6-station turret
            - Drive mechanism for power tools on the turret
            - Chip conveyor Kramer
            - Bar load magazine HAGENUK LM / FN
            with extensive accessories (tool holders, curves, collets, etc)
          used Lathes Bar Automatic Lathe - Single Spindle TRAUB TD 26


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6036 · Bar Automatic Lathe - Single Spindle

          TRAUB - TD 26 - - 1988 -

          Technical details
          spindle passage 26 mm︱turning length 70 mm︱turning speeds 4750 U/min︱total power requirement kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. 1,9x1,0x1,8 m︱
            spindle passage 26 mm
            turning length 70 mm
            turning speeds 4750 U/min
            weight of the machine ca. 1 t
            dimensions of the machine ca. 1,9x1,0x1,8 m
          •   
          •   
          • 1  

            Perfil del comerciante: Stiens Werkzeugmaschinen GmbH

          Contactar con el comerciante



            Stiens Machine Tools GmbH
           Medio 92
            59302 - Oelda
            Alemania
            + 49 252283490 "> + 49 252283490
            (0049) - 2522 - 8349 20-
            info@stiens.de
            www.stiens.de

          Perfil del comerciante

          Hemos ganado reconocimiento nacional e internacional en el área de máquinas CNC.

          Con un éxito creciente, nos hemos establecido como un negocio de máquinas CNC de tamaño mediano para mercados nacionales e internacionales. Ya sea que tenga una máquina demasiada o muy pocas: hable con nosotros y con gusto lo ayudaremos. Desde nuestra fundación en 1988, nuestro negocio en el comercio de maquinaria usada ha sido sinónimo de calidad. Asistimos a muchos clientes de larga data y una clientela cada vez mayor a nivel regional e internacional. La orientación al cliente y la proximidad del cliente son nuestras recetas para el éxito. Nuestros representantes comprometidos y altamente motivados están a su servicio.

          Stiens Machine Tools Handelsgesellschaft mbH
          Medio 92
          59302 Oelde - Alemania

            +49 2522 83 49 0
           +49 2522 83 49 20

           info [@] stiens [.] com




          TOP Manufacturer:

          INDEX -

          Stiens Werkzeugmaschinen GmbH   59302 - Oelde Mittelweg 92 Deutschland
          Stiens Werkzeugmaschinen GmbH

          Mittelweg 92



          Contact Trader


            Stiens Werkzeugmaschinen GmbH
           Mittelweg 92
            59302 - Oelde
            Deutschland
            +49 252283490
            (0049) - 2522 - 8349-20
            info@stiens.de
            www.stiens.de
            Contact person:

           




          Machine category


          Bandsäge · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohr- und Fräszentrum · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Fahrständerfräsmaschine · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Mikro-Finishmaschine · Portalfräsmaschine · Rundschleifmaschine - Außen · Stangenautomat - Mehrspindel · Stangenzuführung · Tischbohrmaschine · Vertikaldrehmaschine · Werkzeugfräsmaschine - Universal · Werkzeugprobierpresse ·