,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Facing Lathe

          Machinelist: Facing Lathe


          Facing Lathe

          used Lathes Facing Lathe TADU FS 1250 CNC


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1010063 · Facing Lathe

          TADU - FS 1250 CNC - - NB - FAGOR 8050 T

          Technical details
          faceplate diameter 1800 mm︱turning diameter over slide rest 2500 mm︱turning length mm︱Control FAGOR 8050 T ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm
            faceplate diameter 1800 mm
            turning diameter over slide rest 2500 mm
            Control FAGOR 8050 T
            Description :
            Stocknumber 1010063
            Type of machine CNC Facelathe
            Make TADU
            Type FS 1250
            Build in nb
            Type of control FAGOR, 8050T
            Turnung diameter over bed 2500 mm


            Additional information
            4-jaws chuck 1800 mm



        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe SEIGER SPL-CG1400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17807 · Facing Lathe

          SEIGER - SPL-CG1400 - - 2018 - ManualPlus 620

          Technical details
          turning diameter over slide rest 1.400 mm︱faceplate diameter 1.000 mm︱x-travel 740 mm︱z-travel 402 mm︱Control ManualPlus 620 ︱Turning Speed - Range 1 1 - 250 U/min.︱Turning Speed - Range 2 1 - 710 U/min.︱power capacity at 60% / 100 % load 46 / 38 KW︱torque max. 6.000 Nm︱feed capacity X/Z 14 / 18 kN︱feed x/z-axis 1 - 8.000 mm/min︱max. workpiece weight -without tailstock 19.000 kg︱spindle taper DIN55027 Gr. 15 ︱spindle bore 130 mm︱spindle diameter in front bearing 220 mm︱total power requirement 60,00 kW︱weight of the machine ca. 7,50 t︱dimensions of the machine ca. 4,00 x 2,50 x H2,50 m︱
          HEIDENHAIN ManualPlus 620 Hydraulic power clamping device 3-jaw chuck SMW Autobloc Ø 1000 mm 4-fold steel holder PARAT "manual"
            turning diameter over slide rest 1.400 mm
            faceplate diameter 1.000 mm
            x-travel 740 mm
            z-travel 402 mm
            Control ManualPlus 620
            Turning Speed - Range 1 1 - 250 U/min.
            Turning Speed - Range 2 1 - 710 U/min.
            power capacity at 60% / 100 % lo. 46 / 38 KW
            torque max. 6.000 Nm
            feed capacity X/Z 14 / 18 kN
            feed x/z-axis 1 - 8.000 mm/min
            max. workpiece weight -without t. 19.000 kg
            spindle taper DIN55027 Gr. 15
            spindle bore 130 mm
            spindle diameter in front bearin. 220 mm
            total power requirement 60,00 kW
            weight of the machine ca. 7,50 t
            dimensions of the machine ca. 4,00 x 2,50 x H2,50 m
            Description :
            HEIDENHAIN ManualPlus 620
            Hydraulic power clamping device
            3-jaw chuck SMW Autobloc Ø 1000 mm
            4-fold steel holder PARAT "manual"


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe SEIGER REKORD CG1400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17806 · Facing Lathe

          SEIGER - REKORD CG1400 - - 2009 - ManualPlus 620

          Technical details
          turning diameter over slide rest 1400 mm︱faceplate diameter 1.000 mm︱x-travel 725 mm︱z-travel 400 mm︱Control ManualPlus 620 ︱Turning Speed - Range 1 5 - 250 U/min.︱Turning Speed - Range 2 5 - 710 U/min.︱total power requirement 55 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 4,8 x 2,5 x 2,1 m︱
          4-fold steel holder PARAT "manual" Manually operated faceplate ROEHM 4 jaws Ø 1000 mm
            turning diameter over slide rest 1400 mm
            faceplate diameter 1.000 mm
            x-travel 725 mm
            z-travel 400 mm
            Control ManualPlus 620
            Turning Speed - Range 1 5 - 250 U/min.
            Turning Speed - Range 2 5 - 710 U/min.
            total power requirement 55 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 4,8 x 2,5 x 2,1 m
            Description :
            4-fold steel holder PARAT "manual"
            Manually operated faceplate ROEHM 4 jaws Ø 1000 mm


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe POREBA TZG 250 A


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19718 · Facing Lathe

          POREBA - TZG 250 A - - 1992 -

          Technical details
          faceplate diameter 2000 mm︱turning diameter over plate 2500 mm︱workpiece width - max. 300 mm︱turning diameter in the pit 3200 mm︱turning speed range - faceplate 0,5 - 100 U/min︱feed range 800 mm/min︱steel cross cut max. 70 x 70 mm²︱spindle bore 105 mm︱spindle diameter in front bearing 320 mm︱headstock travel cross 1000 mm︱max. workpiece weight between centers 25000 kg︱max. workpiece weight -without tailstock 6000 kg︱cross slide - travel 450 mm︱upper slide-adjustment 700 mm︱total power requirement 35 kW︱weight of the machine ca. 20 t︱
          - Digital Read Out - Chip Conveyor - Hydr. Copy Attachment
            faceplate diameter 2000 mm
            turning diameter over plate 2500 mm
            workpiece width - max. 300 mm
            turning diameter in the pit 3200 mm
            turning speed range - faceplate 0,5 - 100 U/min
            feed range 800 mm/min
            steel cross cut max. 70 x 70 mm²
            spindle bore 105 mm
            spindle diameter in front bearin. 320 mm
            headstock travel cross 1000 mm
            max. workpiece weight between ce. 25000 kg
            max. workpiece weight -without t. 6000 kg
            cross slide - travel 450 mm
            upper slide-adjustment 700 mm
            total power requirement 35 kW
            weight of the machine ca. 20 t
            Description :

            - Digital Read Out
            - Chip Conveyor
            - Hydr. Copy Attachment


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe WMW-NILES DP1


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-011 · Facing Lathe

          WMW-NILES - DP1 - - 1986 -

          Technical details
          faceplate diameter 1250 mm︱turning diameter over slide rest 2500 mm︱turning length 4000 mm︱total power requirement 45 kW︱weight of the machine ca. 18 t︱required space 8 x 4 x 2,1 m︱
          Facing lathe WMW Niles with tailstock Centre height 1.250 mm Swing 2.500 mm over bed Centre distance 4.000 mm Travel of carriage 750 mm Longitudinal 630 mm crosslide 4-Jaw Chuck ø 1.250 mm Spindle speed 5,6 - 280 Rpm Spindle bore 100 mm Weight of workpiece 10.000 kg Featured with - Floorplates 4.500 x 2.200 mm - Powered tailstock - Documentation Country of origin Germany Motor power 45 kW Machine weight 18.000 kg Machine LxWxH 8.000 x 4.000 x 2.100 mm
            faceplate diameter 1250 mm
            turning diameter over slide rest 2500 mm
            turning length 4000 mm
            total power requirement 45 kW
            weight of the machine ca. 18 t
            required space 8 x 4 x 2,1 m
            Description :
            Facing lathe WMW Niles with tailstock
            Centre height 1.250 mm
            Swing 2.500 mm over bed
            Centre distance 4.000 mm
            Travel of carriage 750 mm
            Longitudinal 630 mm crosslide
            4-Jaw Chuck ø 1.250 mm
            Spindle speed 5,6 - 280 Rpm
            Spindle bore 100 mm
            Weight of workpiece 10.000 kg
            Featured with
            - Floorplates 4.500 x 2.200 mm
            - Powered tailstock
            - Documentation
            Country of origin Germany
            Motor power 45 kW
            Machine weight 18.000 kg
            Machine LxWxH 8.000 x 4.000 x 2.100 mm


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe ZERBST DP05/W08


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1376 · Facing Lathe

          ZERBST - DP05/W08 - - 1985 - 2010 - Siemens Sinumerik 840D-sl

          Technical details
          faceplate diameter 4.000 mm︱travel -x axis 4.500 mm︱travel -z axis 600 mm︱control Siemens Sinumerik 840D-sl ︱feed range 0 - 8.000 mm/min︱turning speeds 1) 0,7 - 5,6 U/min︱turning speeds 2) 2,8 - 22,4 U/min︱turning speeds 2,1 - 56 U/min︱tool taper Sauter
          Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08
            faceplate diameter 4.000 mm
            travel -x axis 4.500 mm
            travel -z axis 600 mm
            control Siemens Sinumerik 840D-sl
            feed range 0 - 8.000 mm/min
            turning speeds 1) 0,7 - 5,6 U/min
            turning speeds 2) 2,8 - 22,4 U/min
            turning speeds 2,1 - 56 U/min
            tool taper Sauter
            Description :
            Facing Lathe | ZERBST - DP05/W08

            Scope of delivery:

            - Chip conveyor
            - Hydraulic unit

            The ZERBST - DP05/W08 has been retrofitted in 2010.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DP05W08 | DP05 W08 | DP05-W08


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe RAVENSBURG K 900 KH


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-18011 · Facing Lathe

          RAVENSBURG - K 900 KH - - 1966 -

          Technical details
          faceplate diameter 0 mm︱turning diameter over slide rest 900 mm︱turning length 1.000 mm︱total power requirement 25 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱
          Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine is suitable for complicated, high precision copying of heavy workpieces.
            turning diameter over slide rest 900 mm
            turning length 1.000 mm
            total power requirement 25 kW
            weight of the machine ca. 8 t
            Description :
            Height of centres 550 mm
            Max. turning Æ 1200 mm
            Max. turning Æ over slides, approx. 900 mm
            Max. turning length, approx. 1000 mm
            Spindle bore, approx. 90 mm
            24 spindle speeds 4.3 - 587 rpm
            Feeds, infinitely variable 1 - 170 mm/min
            Total load, approx. 25 kW - 380 V - 50 Hz
            Weight, approx. 8000 kg

            Accessories/specialities
            Two separate slides, each equipped with 2-coordinate copying
            equipment, program controlled by plugboard, strengthened bearings
            and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/
            face plate, separate switch cabinet and cooling equipment.
            This machine is suitable for complicated, high precision copying
            of heavy workpieces.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe WMW  ZERBST DP 4000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03798 · Facing Lathe

          WMW ZERBST - DP 4000 - - 1961 -

          Technical details
          faceplate diameter 3500 mm︱turning diameter 4000 mm︱centre distance 16000 mm︱turning speeds 0,71-33,5 U/min︱Rest 2 ︱tailstock quill taper MT ︱max. workpiece weight -without tailstock 6300 kg︱max. workpiece weight between centres 18000 kg︱Plate area mm︱total power requirement 31 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. m︱
            faceplate diameter 3500 mm
            turning diameter 4000 mm
            centre distance 16000 mm
            turning speeds 0,71-33,5 U/min
            Rest 2
            max. workpiece weight -without t. 6300 kg
            max. workpiece weight between ce. 18000 kg
            total power requirement 31 kW
            weight of the machine ca. 50 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe HEYLIGENSTAEDT 6P


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1897 · Facing Lathe

          HEYLIGENSTAEDT - 6P - - 1953 -

          Technical details
          turning length / mm︱turning diameter over plate // mm︱faceplate diameter / mm︱
          Faceplate diameter: 3500mm Center height over plate: 1320mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: about 2400mm Max. workpiece weight: 22000kg Max. torque on the faceplate: 5000 mkg Faceplate ring gear pitch circle diameter: 1900mm Main spindle bore: 120mm range of speeds normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Drive power: 38kW
            turning length / mm
            turning diameter over plate // mm
            faceplate diameter / mm
            Description :
            Faceplate diameter: 3500mm
            Center height over plate: 1320mm
            Turning diameter over plate: 2600mm
            Turning diameter in the pit: 3600mm
            Turning diameter over bed: 1300mm
            Turning length: about 2400mm
            Max. workpiece weight: 22000kg
            Max. torque on the faceplate: 5000 mkg
            Faceplate ring gear pitch circle diameter: 1900mm
            Main spindle bore: 120mm
            range of speeds
            normal: 0.71-35.5 rpm
            increased: 1-50 rpm
            increased: 1.4-71 rpm
            Drive power: 38kW


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe LIEBER 823681


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03153 · Facing Lathe

          LIEBER - 823681 - - -

          Technical details
          faceplate diameter 3200 mm︱slide adjustment 800 mm︱turning speeds 1,5-78 U/min︱stepless reg. with elect. turning speeds ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 3200 mm
            slide adjustment 800 mm
            turning speeds 1,5-78 U/min


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe NILES DP630/3at


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02845 · Facing Lathe

          NILES - DP630/3at - - -

          Technical details
          3-jaw-chuck diameter 630 mm︱turning diameter over slide rest 650 mm︱turning length 500 mm︱turning dia. in gap 1420 mm︱digital readout Mitutoyo ︱turning speeds 3,55-710 U/min︱total power requirement 24 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. m︱
            3-jaw-chuck diameter 630 mm
            turning diameter over slide rest 650 mm
            turning length 500 mm
            turning dia. in gap 1420 mm
            digital readout Mitutoyo
            turning speeds 3,55-710 U/min
            total power requirement 24 kW
            weight of the machine ca. 9 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe RAVENSBURG


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03540 · Facing Lathe

          RAVENSBURG - - - -

          Technical details
          faceplate diameter 1300 mm︱turning diameter over slide rest 850 mm︱centre distance 1800 mm︱turning diameter 2150 mm︱turning speeds 3,15-160 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 1300 mm
            turning diameter over slide rest 850 mm
            centre distance 1800 mm
            turning diameter 2150 mm
            turning speeds 3,15-160 U/min


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing Lathe MEUSER 1500/1400


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-100111 · Facing Lathe

          MEUSER - 1500/1400 - - -

          Technical details
          faceplate diameter 1400 mm︱turning diameter over slide rest 1400 mm︱centre distance 1500 mm︱turning length mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 1400 mm
            turning diameter over slide rest 1400 mm
            centre distance 1500 mm


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Lathes Vertical Turret Lathe - Single Column JUNGENTHAL unbekannt


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3517 · Vertical Turret Lathe - Single Column

          JUNGENTHAL - unbekannt - - unbekannt -

          Technical details
          faceplate diameter 1600 mm︱swing diameter ca. 1800 mm︱turning height ca. 1500 mm︱total power requirement 37 kW︱
            faceplate diameter 1600 mm
            swing diameter ca. 1800 mm
            turning height ca. 1500 mm
            total power requirement 37 kW
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column BERTHIEZ BM 225


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S55000 · Vertical Turret Lathe - Single Column

          BERTHIEZ - BM 225 - - unbekannt -

          Technical details
          faceplate diameter 2250 mm︱swing diameter 4500 mm︱turning height 2000 mm︱turning diameter 3150 mm︱workpiece weight max. 25000 kg︱total power requirement 55 kW︱weight of the machine ca. ca. 32 t︱required space / m︱
            faceplate diameter 2250 mm
            swing diameter 4500 mm
            turning height 2000 mm
            turning diameter 3150 mm
            workpiece weight max. 25000 kg
            total power requirement 55 kW
            weight of the machine ca. ca. 32 t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column HANKOOK VTB-250E


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-3333 · Vertical Turret Lathe - Single Column

          HANKOOK - VTB-250E - - 2021 - Fanuc 32i-B

          Technical details
          faceplate diameter 2.500 mm︱swing diameter 3.000 mm︱turning height max. 2.000 mm︱Control Fanuc 32i-B︱max. torque at faceplate 55100 Nm︱max. cutting force 5.000 kgf︱max. workpiece weight 15.000 kg︱table diameter 2.500 mm︱table speed 1~150 min/-1︱gear steps Auto 2. -step︱spindle cone ISO 7/24 No. 50 ︱tool size 50 mm︱ram cross section 280 x 280 mm︱X-axis travel (sadle horizontal) 1.700 mm︱Z-axis travel (ram vertical) 1.600 mm︱vertical travel of cross rail 1.000 mm︱X-/Z-axis cutting feedrate max. 10.000 mm/min︱X-/Z-axis rapid traverse 10.000 mm/min︱cross rail rapid traverse 300 mm/min︱type of tool holder MAS BT 50
          TECHNICAL DESCRIPTION Vertical Turret Lathe - Single Column HANKOOK VTB-250E Heavy Duty High Precision Vertical Turning Lathe. - Casting bed with strong ribs, hardend and smoothed box way guide are ensure for high precision and working life.Each guideways for feeding axis is lubricated and attached with Turcite to be reduced wear and friction- resistance. - Tool Changer: 12 slots of tools for a tool weight up to 70 kg - Axis drive system:Big ball screws coupled with digital servo motors and linear scales guarantee high reproducibility and precision in positioning. - Control system: Fanuc 32i-B - Standard accessories: 4 jaws face plate with 2.500mm diameter Automatic Tool Changer Hydraulik unit Central lubrication Coolant tank Telescopic cover Work light Patrol lamp (Red, Yellow, Green) Levelling block Foundation bolt & nut Operation tool box & tool kits CE conformity mark The illustration shows a VTC-250E. However, figures are very similar. VTB has no driven tools and no C-axis.
            faceplate diameter 2.500 mm
            swing diameter 3.000 mm
            turning height max. 2.000 mm
            Control Fanuc 32i-B
            max. torque at faceplate 55100 Nm
            max. cutting force 5.000 kgf
            max. workpiece weight 15.000 kg
            table diameter 2.500 mm
            table speed 1~150 min/-1
            gear steps Auto 2. -step
            spindle cone ISO 7/24 No. 50
            tool size 50 mm
            ram cross section 280 x 280 mm
            X-axis travel (sadle horizontal) 1.700 mm
            Z-axis travel (ram vertical) 1.600 mm
            vertical travel of cross rail 1.000 mm
            X-/Z-axis cutting feedrate max. 10.000 mm/min
            X-/Z-axis rapid traverse 10.000 mm/min
            cross rail rapid traverse 300 mm/min
            type of tool holder MAS BT 50
            Description :
            TECHNICAL DESCRIPTION

            Vertical Turret Lathe - Single Column

            HANKOOK VTB-250E

            Heavy Duty High Precision Vertical Turning Lathe.
            - Casting bed with strong ribs, hardend and smoothed box way guide are ensure
            for high precision and working life.Each guideways for feeding axis is
            lubricated and attached with Turcite to be reduced wear and friction-
            resistance.
            - Tool Changer: 12 slots of tools for a tool weight up
            to 70 kg
            - Axis drive system:Big ball screws coupled with digital servo motors and
            linear scales guarantee high reproducibility and precision in positioning.
            - Control system: Fanuc 32i-B
            - Standard accessories:
            4 jaws face plate with 2.500mm diameter
            Automatic Tool Changer
            Hydraulik unit
            Central lubrication
            Coolant tank
            Telescopic cover
            Work light
            Patrol lamp (Red, Yellow, Green)
            Levelling block
            Foundation bolt & nut
            Operation tool box & tool kits

            CE conformity mark

            The illustration shows a VTC-250E.
            However, figures are very similar.
            VTB has no driven tools and no C-axis.


        • JS-Werkzeugmaschinen GmbH
        • Weserstrasse 228
        • 32545 Bad Oeynhausen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column HANKOOK VTC-160 E


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-2222 · Vertical Turret Lathe - Single Column

          HANKOOK - VTC-160 E - - 2021 - Fanuc 0i-T

          Technical details
          faceplate diameter 1.600 mm︱swing diameter 2.000 mm︱turning height max. 1.400 mm︱Control Fanuc 0i-T︱max. torque at faceplate 23800 Nm︱max. cutting force 3.000 kgf︱max. workpiece weight 10.000 kg︱table diameter 1.600 mm︱table speed 0,7~280 min/-1︱gear steps Auto 2. -step︱min. indx angle 0,001 °︱cutting feedrate 0 ~ 900 °/min︱max. speed 3 min/-1︱spindle cone ISO 7/24 No. 50 ︱tool size 32 x 32 mm︱mill spindel speed (VTC) 30~3.000 min/-1︱max. mill spindle torque (VTC) 235 Nm︱ram cross section 220 x 220 mm︱X-axis travel (sadle horizontal) 1260 mm︱Z-axis travel (ram vertical) 900 mm︱
          TECHNICAL DESCRIPTION Vertical Turret Lathe - Single Column HANKOOK VTC-160E Heavy Duty High Precision Vertical Turning Lathe. - Casting bed with strong ribs, hardend and smoothed box way guide are ensure for high precision and working life.Each guideways for feeding axis is lubricated and attached with Turcite to be reduced wear and friction- resistance. - Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up to 70 kg - Axis drive system:Big ball screws coupled with digital servo motors and linear scales guarantee high reproducibility and precision in positioning. - Control system: Fanuc 0i-T - Standard accessories: 4 jaws face plate with 1.600mm diameter Automatic Tool Changer Hydraulik unit Central lubrication Coolant tank Telescopic cover Work light Patrol lamp (Red, Yellow, Green) Levelling block Foundation bolt & nut Operation tool box & tool kits CE conformity mark
            faceplate diameter 1.600 mm
            swing diameter 2.000 mm
            turning height max. 1.400 mm
            Control Fanuc 0i-T
            max. torque at faceplate 23800 Nm
            max. cutting force 3.000 kgf
            max. workpiece weight 10.000 kg
            table diameter 1.600 mm
            table speed 0,7~280 min/-1
            gear steps Auto 2. -step
            min. indx angle 0,001 °
            cutting feedrate 0 ~ 900 °/min
            max. speed 3 min/-1
            spindle cone ISO 7/24 No. 50
            tool size 32 x 32 mm
            mill spindel speed (VTC) 30~3.000 min/-1
            max. mill spindle torque (VTC) 235 Nm
            ram cross section 220 x 220 mm
            X-axis travel (sadle horizontal) 1260 mm
            Z-axis travel (ram vertical) 900 mm
            Description :
            TECHNICAL DESCRIPTION

            Vertical Turret Lathe - Single Column

            HANKOOK VTC-160E

            Heavy Duty High Precision Vertical Turning Lathe.
            - Casting bed with strong ribs, hardend and smoothed box way guide are ensure
            for high precision and working life.Each guideways for feeding axis is
            lubricated and attached with Turcite to be reduced wear and friction-
            resistance.
            - Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up
            to 70 kg
            - Axis drive system:Big ball screws coupled with digital servo motors and
            linear scales guarantee high reproducibility and precision in positioning.
            - Control system: Fanuc 0i-T
            - Standard accessories:
            4 jaws face plate with 1.600mm diameter
            Automatic Tool Changer
            Hydraulik unit
            Central lubrication
            Coolant tank
            Telescopic cover
            Work light
            Patrol lamp (Red, Yellow, Green)
            Levelling block
            Foundation bolt & nut
            Operation tool box & tool kits

            CE conformity mark


        • JS-Werkzeugmaschinen GmbH
        • Weserstrasse 228
        • 32545 Bad Oeynhausen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column SCHIESS- FRORIEP 14DKE 1250


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03763 · Vertical Turret Lathe - Single Column

          SCHIESS- FRORIEP - 14DKE 1250 - - 2015 - Siemens

          Technical details
          faceplate diameter 1250 mm︱swing diameter 1500 mm︱turning height 1250 mm︱Control Siemens ︱type 840 Dsl ︱tool taper 4 Pos.︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale; it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us.
            faceplate diameter 1250 mm
            swing diameter 1500 mm
            turning height 1250 mm
            Control Siemens
            type 840 Dsl
            tool taper 4 Pos.
            Description :
            The tech. Data are manufacturer or operator information and therefore for us
            not binding. We reserve the right to prior sale; it apply
            only our business
            and conditions of sale.

            About Us
            more than 400 own machines in stock
            over 12000 m² storage area, crane capacity 70 t
            more than 10000 articles accessories for your workshop
            You want to sell machines, production lines or your company,
            Then contact us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column SCHIESS-FRORIEP 14 DKE 1250


          • Brodschrangen 3-5
          • 20457 Hamburg
          • Deutschland

          • +49 (0)40 3003936255
            +49 (0)40 3003936249
          • info@maturus.com
            www.maturus.com
          #2055-Soe5 · Vertical Turret Lathe - Single Column

          SCHIESS-FRORIEP - 14 DKE 1250 - - 2015 - Siemens 840 DSL

          Technical details
          swing diameter 1.500 mm mm︱faceplate diameter 1.250 mm mm︱control Siemens 840 DSL ︱tool taper 4 Stk. ︱turning height 1.250 mm mm︱total power requirement / kW︱weight of the machine ca. / t︱dimensions of the machine ca. / m︱
            swing diameter 1.500 mm mm
            faceplate diameter 1.250 mm mm
            control Siemens 840 DSL
            tool taper 4 Stk.
            turning height 1.250 mm mm
            total power requirement / kW
            weight of the machine ca. / t
            dimensions of the machine ca. / m


        • Brodschrangen 3-5
        • 20457 Hamburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column PITTLER PV 1250 / 1-1


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19984 · Vertical Turret Lathe - Single Column

          PITTLER - PV 1250 / 1-1 - - 2009 - Siemens 840D

          Technical details
          faceplate diameter 800 mm︱swing diameter 1400 mm︱turning height mm︱turning diameter 1250 mm︱distance spindle head - tool holder 1850 mm︱control Siemens 840D ︱x-axis -455 / +1555 mm︱z-axis 1000 mm︱c-axis 360000 x 0,001 °︱diameter of spindle flange 380 mm︱spindle turning speed range 800 U/min︱spindle motor 2x 52 kW︱b-axis 0-270 °︱y-axis +/- 115 mm︱work piece power kW︱tool taper Capto C8 ︱worktool spindle axis 8000 U/min︱total power requirement 97 kW︱weight of the machine ca. 29 t︱dimensions of the machine ca. 11,5 x 4,2 x 4,5 m︱
          5-axis vertical CNC turning and milling centre - CNC control Siemens 840D - Chuck diameter 800mm - Chip conveyor - Swivel head with turning, milling spindle (with B and Y axis) - Tool changer 32-fold (Capto C8) - Coolant system - Work area flushing - Tool monitoring - Tools
            faceplate diameter 800 mm
            swing diameter 1400 mm
            turning diameter 1250 mm
            distance spindle head - tool hol. 1850 mm
            control Siemens 840D
            x-axis -455 / +1555 mm
            z-axis 1000 mm
            c-axis 360000 x 0,001 °
            diameter of spindle flange 380 mm
            spindle turning speed range 800 U/min
            spindle motor 2x 52 kW
            b-axis 0-270 °
            y-axis +/- 115 mm
            tool taper Capto C8
            worktool spindle axis 8000 U/min
            total power requirement 97 kW
            weight of the machine ca. 29 t
            dimensions of the machine ca. 11,5 x 4,2 x 4,5 m
            Description :
            5-axis vertical CNC turning and milling centre
            - CNC control Siemens 840D
            - Chuck diameter 800mm
            - Chip conveyor
            - Swivel head with turning, milling spindle (with B and Y axis)
            - Tool changer 32-fold (Capto C8)
            - Coolant system
            - Work area flushing
            - Tool monitoring
            - Tools


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 2800 / 250 SM F


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03271 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 2800 / 250 SM F - - 2008 - Siemens 840 D

          Technical details
          swing diameter 2800 mm︱turning height 1195 mm︱Control Siemens 840 D ︱turning speeds 224 U/min︱x-travel +-1600 mm︱z-travel 1100 mm︱machine table ︱diameter 2500 mm︱workpiece weight 25000 kg︱power capacity 80 kW︱Torque 35900 Nm︱total power requirement kW︱weight of the machine ca. 66,5 t︱dimensions of the machine ca. m︱faceplate diameter mm︱
          Dörries 6, Machine no. V-800293 - Fixed crossbeam, no tool drive Ram -Cross section of ram: 250 x 250 mm -Travel ram: 1100 mm Equipment/accessories: -Tool changer revolver 4-times in the ram -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 2800 mm
            turning height 1195 mm
            Control Siemens 840 D
            turning speeds 224 U/min
            x-travel +-1600 mm
            z-travel 1100 mm
            diameter 2500 mm
            workpiece weight 25000 kg
            power capacity 80 kW
            Torque 35900 Nm
            weight of the machine ca. 66,5 t
            Description :
            Dörries 6, Machine no. V-800293


            - Fixed crossbeam, no tool drive

            Ram
            -Cross section of ram: 250 x 250 mm
            -Travel ram: 1100 mm

            Equipment/accessories:
            -Tool changer revolver 4-times in the ram
            -Own filter system
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 1600/140 SM


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03270 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 1600/140 SM - - 2008 - Siemens 840 D

          Technical details
          swing diameter 1600 mm︱turning height 1285 mm︱Control Siemens 840 D ︱turning speeds 400 U/min︱x-travel +- 950 mm︱z-travel 1100 mm︱workpiece weight 9000 kg︱power capacity 80 kW︱Torque 19900 Nm︱table diameter 1400 mm︱weight of the machine ca. 42 t︱dimensions of the machine ca. 7600 x 5200 x 5400 mm︱
          Dörries 7, Machine number V-800294 Crossbeam: -Cross beam travel: 600 mm Ram: -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm) -Ram travel 1100 mm Equipment/accessories: -Tool magazine -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 1600 mm
            turning height 1285 mm
            Control Siemens 840 D
            turning speeds 400 U/min
            x-travel +- 950 mm
            z-travel 1100 mm
            workpiece weight 9000 kg
            power capacity 80 kW
            Torque 19900 Nm
            table diameter 1400 mm
            weight of the machine ca. 42 t
            dimensions of the machine ca. 7600 x 5200 x 5400 mm
            Description :
            Dörries 7, Machine number V-800294


            Crossbeam:
            -Cross beam travel: 600 mm

            Ram:
            -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm)
            -Ram travel 1100 mm

            Equipment/accessories:
            -Tool magazine
            -Own filter system
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 2400/200 SM


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03276 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 2400/200 SM - - 2008 - Siemens 840 D

          Technical details
          swing diameter 2400 mm︱turning height 2445 mm︱Control Siemens 840 D ︱feed range 0-18000 mm/min︱table diameter 2000 mm︱max. table load 17000 kg︱total power requirement 100 kW︱weight of the machine ca. 75 t︱dimensions of the machine ca. 10.000 x 5.500 x 7.100 mm︱
          Dörries 2, machine number V-800289 with hydraulical chuck, without milling function Crossbeam: -Travel crossbeam: 1000 mm (100 mm steps) -Crossbeam support travel: ± 1350 mm Ram : -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm) -Travel ram: 1500 mm Equipment/accessories: -No driven tools -Tool changer/head changer 72 times -Hydraulic chuck -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 2400 mm
            turning height 2445 mm
            Control Siemens 840 D
            feed range 0-18000 mm/min
            table diameter 2000 mm
            max. table load 17000 kg
            total power requirement 100 kW
            weight of the machine ca. 75 t
            dimensions of the machine ca. 10.000 x 5.500 x 7.100 mm
            Description :
            Dörries 2, machine number V-800289 with hydraulical chuck, without milling
            function


            Crossbeam:
            -Travel crossbeam: 1000 mm (100 mm steps)
            -Crossbeam support travel: ± 1350 mm

            Ram :
            -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm)
            -Travel ram: 1500 mm

            Equipment/accessories:
            -No driven tools
            -Tool changer/head changer 72 times
            -Hydraulic chuck
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation




        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column ONSAL SC14


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02276 · Vertical Turret Lathe - Single Column

          ONSAL - SC14 - - 2008 - Sinumerik 840 D

          Technical details
          faceplate diameter 1320 mm︱swing diameter 1400 mm︱turning height 800 mm︱workpiece weight 6000 kg︱cross rail adjustment 800 mm︱Tools changer for 12 tools ︱chip conveyor ︱coolant tank ︱Control Sinumerik 840 D︱transmission ratio 3 ︱daylight table - ram 950 mm︱slide adjustment 750 mm︱total power requirement 60 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 7,5x5,5x4,5 m︱
            faceplate diameter 1320 mm
            swing diameter 1400 mm
            turning height 800 mm
            workpiece weight 6000 kg
            cross rail adjustment 800 mm
            Control Sinumerik 840 D
            transmission ratio 3
            daylight table - ram 950 mm
            slide adjustment 750 mm
            total power requirement 60 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 7,5x5,5x4,5 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

          TOP Manufacturer:

          TADU - RAVENSBURG - NILES - LIEBER - WMW ZERBST -