,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Lathes

          Machinelist: Lathes


          Copying Lathe

          used Lathes Copying Lathe HEYLIGENSTAEDT HEYCOP 2/2000


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00282 · Copying Lathe

          HEYLIGENSTAEDT - HEYCOP 2/2000 - - 1960 -

          Technical details
          turning diameter over slide rest 250 mm︱centre distance 2000 mm︱copying travel longitudinal 2000 mm︱turning speeds 22 - 1120 U/min︱voltage 380 V︱total power requirement 11 kW︱weight of the machine ca. 3,65 t︱dimensions of the machine ca. 4 x 1,5 x 1,5 m︱
          We quote a copying lathe of type HEYLIGENSTAEDT HEYCOP 2/2000. This machine is in good running conditions and comes from company in our neighbourship. The quality and the shape of machine is in good manner. There can be turned parts up to dia. 250mm and lenght 2000mm, with chuck or between centers. The machine has copying devoice and is suitable for turning of quantity of same parts in short time. With the machine will be delivered chuck, lynette, oil bassin with high pressure pump, manual in German language and separate OUT-Button. Come for inspection to our company in Giebelstadt, about 80min from FRANKFURT AIRPORT.
            turning diameter over slide rest 250 mm
            centre distance 2000 mm
            copying travel longitudinal 2000 mm
            turning speeds 22 - 1120 U/min
            voltage 380 V
            total power requirement 11 kW
            weight of the machine ca. 3,65 t
            dimensions of the machine ca. 4 x 1,5 x 1,5 m
            Description :
            We quote a copying lathe of type HEYLIGENSTAEDT HEYCOP 2/2000. This machine is
            in good running conditions and comes from company in our neighbourship. The
            quality and the shape of machine is in good manner. There can be turned parts
            up to dia. 250mm and lenght 2000mm, with chuck or between centers. The machine
            has copying devoice and is suitable for turning of quantity of same parts in
            short time. With the machine will be delivered chuck, lynette, oil bassin with
            high pressure pump, manual in German language and separate OUT-Button. Come for
            inspection to our company in Giebelstadt, about 80min from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • Datasheet
          Request / Contact

          lathe-conventional-electronic

          used Lathes lathe-conventional-electronic KART E2N-750-R


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00349 · lathe-conventional-electronic

          KART - E2N-750-R - - 1969 - konventionell

          Technical details
          turning diameter 250 mm︱turning length 750 mm︱swing diameter over bed slide 250 mm︱total power requirement 2,3 kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 3,1x1,4x1,6 m︱
          We offer a conventional lathe of the type KART E3N-750-R. This machine built in 1969 was used for cutting wedge and timing belt. There is also a boom with an adjustable distance to the axle center and a holder for a roller on which the wide belt hose was guided. Then the parting width with the Linear scale from Heidenhein VRZ400 B with linear encoder LS 603 C was adjusted and the belt cut off. Center distance 750mm Center height 125mm for Ø up to 250mm Speed 36-2,100 rpm Spindle mount MK4 Spindle clearance 26mm 380V 50Hz
          5.4A Longitudinal feeds 0.03-2.18mm/rev Cross feeds 0.015-1.09mm/rev for thread pitches: metric 0.2-7.5mm Modulus 0.25-2.5 inch 4-60G/1" With 4-jaw chuck Ø 150mm. Other accessories according to pictures. Come to Giebelstadt near Würzburg to view the machine. The machine is packed on a wooden pallet and loaded onto a truck by us.
            turning diameter 250 mm
            turning length 750 mm
            swing diameter over bed slide 250 mm
            total power requirement 2,3 kW
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 3,1x1,4x1,6 m
            Description :
            We offer a conventional lathe of the type KART E3N-750-R. This machine built in 1969 was used for cutting wedge and
            timing belt. There is also a boom with an adjustable distance to the axle center and a holder for a roller on which the wide
            belt hose was guided. Then the parting width with the
            Linear scale from Heidenhein VRZ400 B with linear encoder LS 603 C was adjusted and the belt cut off.

            Center distance 750mm
            Center height 125mm
            for Ø up to 250mm
            Speed 36-2,100 rpm
            Spindle mount MK4
            Spindle clearance 26mm
            380V 50Hz
            5.4A
            Longitudinal feeds 0.03-2.18mm/rev
            Cross feeds 0.015-1.09mm/rev
            for thread pitches:
            metric 0.2-7.5mm
            Modulus 0.25-2.5
            inch 4-60G/1"

            With 4-jaw chuck Ø 150mm. Other accessories according to pictures.

            Come to Giebelstadt near Würzburg to view the machine.

            The machine is packed on a wooden pallet and loaded onto a truck by us.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 2.500 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.