,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Lathes

          Machinelist: Lathes


          Center Lathe

          used Lathes Center Lathe OPTIMUM OptiTurn TH 3610


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12309 · Center Lathe

          OPTIMUM - OptiTurn TH 3610 - - 2018 / Demo -

          Technical details
          turning diameter over bed 356 mm︱turning diameter over slide rest 225 mm︱turning length 980 mm︱centre height 180 mm︱bed width 187 mm︱speeds 8: 70 - 2000 U/min︱quill stroke 120 mm︱total power requirement 1,5 kW︱diameter of quill 42 mm︱spindle bore 52 mm︱feeds - longitudinal 32: 0,052 - 1,392 mm/min︱feeds - cross 32: 0,014 - 0,38 mm/min︱weight of the machine ca. 570 kg︱dimensions of the machine ca. 1,95 x 0,73 x 1,35 m︱Electric 400 Volt ︱3 jaw chuck 200 mm︱Multifix-steel holder SWH 3 E ︱Applications for rapid transfer steel-holder 3 ︱Food - Stop ︱Chuck protection geschaltet
          Universal lathe make Optimum, Mod, OptiTurn TH 3610, year 2018 with ONLY approx. 20 operating hours on original pallet. Purpose of use no longer applies, that's why the machine is sold. Machine dealer with own stock of 1600 m².
            turning diameter over bed 356 mm
            turning diameter over slide rest 225 mm
            turning length 980 mm
            centre height 180 mm
            bed width 187 mm
            speeds 8: 70 - 2000 U/min
            quill stroke 120 mm
            total power requirement 1,5 kW
            diameter of quill 42 mm
            spindle bore 52 mm
            feeds - longitudinal 32: 0,052 - 1,392 mm/min
            feeds - cross 32: 0,014 - 0,38 mm/min
            weight of the machine ca. 570 kg
            dimensions of the machine ca. 1,95 x 0,73 x 1,35 m
            3 jaw chuck 200 mm
            Multifix-steel holder SWH 3 E
            Applications for rapid transfer . 3
            Chuck protection geschaltet
            Description :
            Universal lathe make Optimum, Mod, OptiTurn TH 3610, year 2018 with ONLY approx.
            20 operating hours on original pallet. Purpose of use no longer applies, that's
            why the machine is sold.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact

          lathe-conventional-electronic

          used Lathes lathe-conventional-electronic OPTIMUM OPTIturn TH4215D


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200001 · lathe-conventional-electronic

          OPTIMUM - OPTIturn TH4215D - - NEU -

          Technical details
          turning diameter 420 mm︱turning length 1500 mm︱swing diameter over bed slide 250 mm︱Swingdiameter in the bed bridge 590 mm︱centre height 210 mm︱Turning length in the bed bridge 260 mm︱reus 16 (45-1800) U/min︱tail stock MK 4 ︱quill stroke 120 mm︱diameter of quill 50 mm︱spindle taper DIN ISO 702-2 Nr. 6 ︱spindle bore 52 mm︱spindle cone MK 6 ︱feed längs 17 / 0,05 - 1,7 m/min︱feed plan 17 / 0,025 - 0,85 m/min︱total power requirement 4,6 kW︱weight of the machine ca. 1340 kg︱dimensions of the machine ca. 2440 x 915 x 1375 mm︱
          Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool ** Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm ** Quick change holder SWH5-B set
            turning diameter 420 mm
            turning length 1500 mm
            swing diameter over bed slide 250 mm
            Swingdiameter in the bed bridge 590 mm
            centre height 210 mm
            Turning length in the bed bridge 260 mm
            reus 16 (45-1800) U/min
            tail stock MK 4
            quill stroke 120 mm
            diameter of quill 50 mm
            spindle taper DIN ISO 702-2 Nr. 6
            spindle bore 52 mm
            spindle cone MK 6
            feed längs 17 / 0,05 - 1,7 m/min
            feed plan 17 / 0,025 - 0,85 m/min
            total power requirement 4,6 kW
            weight of the machine ca. 1340 kg
            dimensions of the machine ca. 2440 x 915 x 1375 mm
            Description :
            Fully equipped master and feed spindle lathes. TH 4215 with
            digital position indicator DPA 21 / 3462070

            - Hardened and ground Z-axis guideway
            - Spindle mount Camlock DIN ISO 702-2 No. 6
            - Precisely crafted slide
            - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm
            - Quadruple steel holder
            - All guides can be adjusted using V-ledges
            - Adjustment range top slide ± 90°
            - Guaranteed concentricity of the spindle nose better than 0.015 mm
            - Main spindle running in oil bath
            - Smooth-running gear wheels, hardened and ground with 2 adjustable
            Precision tapered roller bearings
            - Hand wheels decoupled and tested according to EN 23125
            - Two-channel right-left switch tested according to EN 23125
            - Switch with life cycle calculation, tested according to EN ISO 13849
            - All metric pitches in the range 0.2 to 14mm/rev and all
            Inch threads in the range of 72 - 2 threads per inch without changing the
            Change gears adjustable by shift lever in the control panel
            - Clockwise/counterclockwise rotation can be switched on the bed slide via the
            switching spindle
            - Central lubrication in bed slide
            - Meehanite cast base and machine bed in one piece
            - Lead screw cover
            - Emergency stop device with foot control
            - Safety handwheels with snap-out function in the X and Z axes
            - Tailstock for taper turning adjustable ± 10 mm
            - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm
            - Quick, easy and tool-free adjustment using a clamping lever
            - Heavily ribbed prism bed, induction hardened and precision ground
            cast iron
            - Coolant device with separate coolant tank with level indicator and
            oil separator; easy and complete emptying and cleaning according to DIN
            - LED machine lamp in the chip guard

            Models TH 4210D and TH 4215D with digital readout DPA21
            - User-friendly membrane keyboard, splash-proof, closed
            andglare-free
            - Glass scales

            scope of delivery
            - Fixed bezel passage Ø 15 - 145 mm
            - Revolving bezel passage Ø 10 - 75 mm
            - LED machine light
            - Reducing sleeve MT 6 / MT 4
            - Fixed center MK 4
            - Change gear set
            - Position stop with fine adjustment
            - Initial filling of the machine with quality oil
            - Operating tool

            ** Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø
            250 mm
            ** Quick change holder SWH5-B set


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic OPTIMUM OPTIturn TH 3309D


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7375 · lathe-conventional-electronic

          OPTIMUM - OPTIturn TH 3309D - - NEU -

          Technical details
          turning diameter 330 mm︱turning length 830 mm︱swing diameter over bed slide 196 mm︱Swingdiameter in the bed bridge 170 ︱centre height 165 mm︱centre distance 830 mm︱Turning length in the bed bridge 430 ︱reus 16 (70-2000) U/min︱tail stock MK 3 ︱quill stroke 110 mm︱diameter of quill 32 mm︱spindle taper DIN ISO 702-2 Nr. 4 ︱spindle bore 38 mm︱spindle cone MK 5 ︱feed längs 32 / 0,052 1,392 m/min︱feed plan 3,2 / 0,014 0,38 m/min︱total power requirement kW︱weight of the machine ca. 0,52 t︱dimensions of the machine ca. 1,7 x 0,75 x 1,6 m︱
          Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762
            turning diameter 330 mm
            turning length 830 mm
            swing diameter over bed slide 196 mm
            Swingdiameter in the bed bridge 170
            centre height 165 mm
            centre distance 830 mm
            Turning length in the bed bridge 430
            reus 16 (70-2000) U/min
            tail stock MK 3
            quill stroke 110 mm
            diameter of quill 32 mm
            spindle taper DIN ISO 702-2 Nr. 4
            spindle bore 38 mm
            spindle cone MK 5
            feed längs 32 / 0,052 1,392 m/min
            feed plan 3,2 / 0,014 0,38 m/min
            weight of the machine ca. 0,52 t
            dimensions of the machine ca. 1,7 x 0,75 x 1,6 m
            Description :
            Fully equipped leading and tension spindle lathes. TH 3309D with
            digital position indicator DPA 21/3402040

            - Hardened and ground Z-axis guideway
            - Spindle mount Camlock DIN ISO 702-2 No. 4
            - Precisely crafted slide
            - Handwheels with adjustable fine scale 0.04 / 0.02 mm
            - Quadruple steel holder
            - All guides can be adjusted using V-ledges
            - Main spindle running in an oil bath
            - Gear wheels run smoothly, hardened and ground
            - Upper slide adjustment range ± 90 °
            - Guaranteed concentricity of the spindle nose better than 0.015 mm
            - Handwheels decoupled and tested according to EN 23125
            - Safety handwheels with push-out function in the X and Z axes
            - Two-channel right-left switch tested according to EN 23125
            - DC 24 volt electrical system with two-channel safety circuit according to EN
            23125
            - Lathe chuck protection tested according to EN 23125
            - Switch with life cycle calculation, tested according to EN ISO 13849
            - Lockable main switch
            - Clockwise / counterclockwise rotation on the bed slide switchable
            - Lead screw cover
            - Tailstock for taper turning adjustable ± 10 mm
            - Tailstock quill and handwheel with adjustable fine scale 0.02 mm
            - Quick, easy and tool-free adjustment using a clamping lever
            - Heavily ribbed prism bed, inductively hardened and precision ground
            - Machine base with tool compartment on the right-hand side (left-hand side
            with 3
            Bezels (no compartments)
            - Pull-out chip tray with guide rails
            - Emergency stop device with foot actuation
            - LED machine lamp integrated in the chip guard

            Digital position indicator DPA 21
            - User-friendly membrane keyboard, splash-proof, closed
            and glare-free
            - glass rulers

            scope of delivery
            - Fixed steady rest passage Ø 6 - Ø 50 mm
            - Moving steady rest passage Ø 8 - Ø 30 mm
            - LED machine light
            - Reduction sleeve MK 5 / MK 3
            - Two fixed centering points MK 3
            - Quadruple steel holder 16 mm
            - Change gears set
            - machine base
            - Initial machine filling with quality oil
            - operating tool

            ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping
            Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.