,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Gear Shaping Machine

          Machinelist: Gear Shaping Machine


          Gear Shaping Machine

          used Gear cutting machines Gear Shaping Machine LORENZ LS 150


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-354158 · Gear Shaping Machine

          LORENZ - LS 150 - - 1980 -

          Technical details
          max. wheel diameter 150 mm︱gear width 42 mm︱max. module 3 ︱min. module 0,5 ︱total power requirement 10 kW︱weight of the machine ca. 6 t︱
          External gears, max. Ø 150 mm (or more) Internal gears, max workpiece Ø, approx. 280 mm Gear width, max. 42 mm Module, max. 0.5 - 3 Length of stroke 0 - 50 mm Adjustment of stroke 0 - 70 mm Distance between shaper spindle and body of machine 250 mm Spindle internal table, approx. 45 mm Strokes, roughing / finishing 450 - 1,250 / 2,500 / min Table Ø 250 mm Table bore 100 mm Distance between table and shaper head, approx. 320 mm Axial travel of workpiece slide, approx. 285 mm Feed range, tooth depth 0.01 - 0.063 mm/stroke Rotary feed 0.125 - 3,150 mm/stroke Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight 6,000 kg Accessories / Special Features * Built-in hydrostatic straight guide. * Built-in raiser plate for raising the shaper head 130 mm. * Hydraulic counter bracket (height-adjustable tailstock, approx. 150 mm) and hydraulic universal workpiece clamping device in the table for workpieces with length of up to approx. 400 mm, probably more by reversing the tailstock. * Automatic change of number of strokes and automatic feed change for roughing and finishing work, in up to 7 steps. * Automatic and motor-driven shaper stroke fixing in the upper position after work is finished. * Separate switch and control cabinet. * Separate hydraulic unit. * Coolant equipment with chip conveyor and chip collection. * Vibration elements. * Various change gears. * Holders for shaper tools. * Completely covered working area, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            max. wheel diameter 150 mm
            gear width 42 mm
            max. module 3
            min. module 0,5
            total power requirement 10 kW
            weight of the machine ca. 6 t
            Description :
            External gears, max. Ø 150 mm (or more)
            Internal gears, max workpiece Ø, approx. 280 mm
            Gear width, max. 42 mm
            Module, max. 0.5 - 3

            Length of stroke 0 - 50 mm
            Adjustment of stroke 0 - 70 mm
            Distance between shaper spindle and body of machine 250 mm
            Spindle internal table, approx. 45 mm
            Strokes, roughing / finishing 450 - 1,250 / 2,500 / min

            Table Ø 250 mm
            Table bore 100 mm
            Distance between table and shaper head, approx. 320 mm
            Axial travel of workpiece slide, approx. 285 mm

            Feed range, tooth depth 0.01 - 0.063 mm/stroke
            Rotary feed 0.125 - 3,150 mm/stroke

            Total electrical load, approx. 10 kW - 380 V - 50 Hz
            Weight 6,000 kg

            Accessories / Special Features
            * Built-in hydrostatic straight guide.
            * Built-in raiser plate for raising the shaper head 130 mm.
            * Hydraulic counter bracket (height-adjustable tailstock, approx. 150 mm) and hydraulic universal workpiece clamping device in the table for workpieces with length of up to approx. 400 mm, probably more by reversing the tailstock.
            * Automatic change of number of strokes and automatic feed change for roughing and finishing work, in up to 7 steps.
            * Automatic and motor-driven shaper stroke fixing in the upper position after work is finished.
            * Separate switch and control cabinet. * Separate hydraulic unit.
            * Coolant equipment with chip conveyor and chip collection. * Vibration elements.
            * Various change gears. * Holders for shaper tools. * Completely covered working area, etc.


            Condition : Good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-537237 · Gear Shaping Machine

          LORENZ - LS 400 - - 1974 -

          Technical details
          max. wheel diameter 400 mm︱gear width 75 mm︱max. module 0,5 ︱min. module 60 ︱total power requirement 25 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. m︱
          L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _________________________________________________________________________________ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.
            max. wheel diameter 400 mm
            gear width 75 mm
            max. module 0,5
            min. module 60
            total power requirement 25 kW
            weight of the machine ca. 7 t
            Description :
            L O R E N Z (Germany)
            High Performance Automatic Gear Shaper
            Model LS 400 Year 1975 Serial No. 12 592
            _________________________________________________________________________________

            External gear, max. Ø 400 mm (possibly larger)
            Internal gear dia. 350 mm
            Gear width, max. 75 mm
            Module range 0.5 - 6

            Length of stroke 82 mm
            Adjustment of stroke position 0 - 100 mm
            Distance between shaper spindle and machine body 250 mm
            Spindle taper MK 5
            No. of strokes, roughing/finishing process 118 - 1,000 per min

            Table size 400 mm
            Table bore 125 mm
            Mounting height between table and shaper head 190 / 290 mm
            Axial travel of tool slide, approx. 295 mm

            No. of teeth, approx. 12-150
            Feed range, tooth depth 0.01 - 0.063 mm/stroke
            Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke

            Spindle drive, approx. 19 kW
            Total electrical load, approx. 25 kW - 380 V - 50 Hz
            Weight 7,000 kg

            Accessories / Special Features
            * Hydrostatic straight guides with separate hydraulic aggregate.
            * Built-in raiser plate approx. 100 mm to increase height of shaper head.
            * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp
            ring shaped workpieces on the inner diameter with various inserts to accommodate
            different workpiece diameters.
            * Stepless Regulation of number of strokes for improving roughing and finishing process
            * Automatic changeover of number of strokes, and automatic feed changeover for roughing
            and finishing work in up to 3 cuts.
            * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished.
            * Separate switch and control cabinet. Two-hand start.
            * Coolant equipment with magnetic chip conveyor and chip collection container.
            * Various change gears, shaping tool holders, etc.

            Condition : Satisfactory to Good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest. We always have a good selection of gear machines on stock.
            Please let us know what you need.



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-574652 · Gear Shaping Machine

          LORENZ - LS 400 - - 1973 -

          Technical details
          max. wheel diameter 400 mm︱gear width 75 mm︱max. module 0,5 ︱min. module 6 ︱total power requirement 25 kW︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. m︱
            max. wheel diameter 400 mm
            gear width 75 mm
            max. module 0,5
            min. module 6
            total power requirement 25 kW
            weight of the machine ca. 7000 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LIEBHERR WS 1


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-052076 · Gear Shaping Machine

          LIEBHERR - WS 1 - - 1969 -

          Technical details
          max. wheel diameter 265 mm︱gear width 45 mm︱max. module 4 ︱min. module 0,3 ︱max. workpiece diameter 300 mm︱stroke length max. 0-50 mm︱stroke position adjustment 25 mm︱distance work spindle /surface of the table 170/245 mm︱spindle taper innen MK 4 ︱table-size 180 mm︱table hole 95/75 mm︱strokes per minute 450 - 840 ︱total power requirement 10 kW︱weight of the machine ca. 5200 kg︱dimensions of the machine ca. m︱
          Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.
            max. wheel diameter 265 mm
            gear width 45 mm
            max. module 4
            min. module 0,3
            max. workpiece diameter 300 mm
            stroke length max. 0-50 mm
            stroke position adjustment 25 mm
            distance work spindle /surface o. 170/245 mm
            spindle taper innen MK 4
            table-size 180 mm
            table hole 95/75 mm
            strokes per minute 450 - 840
            total power requirement 10 kW
            weight of the machine ca. 5200 kg
            Description :
            Max. gear Æ (external) approx. 265 mm
            Max. workpiece Æ for internal gears 300 mm
            Max. gear width 45 mm
            Module range 0.3 - 4

            Length of stroke 0 - 50 mm
            Adjustment of length of stroke 25 mm
            Distance between table and spindle, min./max. 170/245 mm

            Spindle taper (external 90 / internal 50) MT 4

            Table size 180 mm
            Table bore 95 / 75 mm
            Table travel, cross, approx. 175 mm

            Number of strokes, infinitely variable 450 - 840 /min
            Feed range 0.09 - 0.6 mm/stroke
            Rotary feed, strokes per cutter revolution 2,722 - 681

            Total electrical load 10 kW - 380 V - 50 Hz
            Weight 5,200 kg

            Accessories / Special Features
            * Selection switch for various working programmes, and for
            manual control.
            * Multi-cut device for roughing, finishing and sparkout,
            via presettable micrometer screws.
            * Hydraulic workpiece external clamping device mounted on table,
            for internal gears (a sort of collet chuck).
            * Separate switch cabinet. * Separate hydraulic unit.
            * Hydrostatic straight guide, with cooling aggregate for the
            hydrostatic pressure oil, separate.
            * Lateral table adjustment ensures optimal ram lift from workpiece.
            * Infinitely variable number of strokes via DC motor.
            * Built-on coolant device.
            * Presettable impulse counter for switching off table after every
            cut. With digital display.
            * Various change gears.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used gear shaping machine for your needs!
          A gear shaping machine for all your metalworking needs

          A gear shaping machine is used for the cutting of teeth in gears of a variety of shapes and sizes. If your business demands large scale gear production then a gear shaping machine is an invaluable piece of equipment. Whether you need to manufacture internal or external gears a gear shaping machine can improve the efficiency of your business. Buying new equipment can be pricey so used machines are a great solution for those interested in a budget-friendly option.

          Maximize your efficiency with a gear shaping machine

          A high quality gear shaping machine offers business owners reliability precision and efficiency. Most modern machines have high automation levels freeing you to devote your time to other projects while your gear shaping machine performs without issue. Money can be a problem when outfitting a workplace but buying used metalworking equipment is an ideal solution. LagerMaschinen offers your great quality products in a convenient online location. Browse LagerMaschinen's extensive list of used machinery to find the best fit for your needs.

          Save time and money while shopping at LagerMaschinen

          Shopping for industrial machinery can be a tedious and overwhelming process. Comparing prices and features is time-consuming and daunting. Save yourself time and money by looking for your next piece of equipment at LagerMaschinen. The user-friendly forum of used industrial equipment allows you to shop for machinery by price features and location. Whether you're in the market for a gear shaping machine or any other industrial machines LagerMaschinen offers you a great selection of high-quality used machinery in an easy-to-use forum.