,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          CNC Turning- and Milling Center

          Machinelist: CNC Turning- and Milling Center


          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center MORI SEIKI NTX1000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17959 · CNC Turning- and Milling Center

          MORI SEIKI - NTX1000 - - 2012 - MSX-711-IV Mori Seiki

          Technical details
          turning diameter 370 mm︱turning length 424 mm︱control MSX-711-IV Mori Seiki︱swing diameter 370 mm︱X1- Axis 380 mm︱X2- Axis 155 mm︱Z1- Axis 460+155 mm︱Z2- Axis 610 mm︱y-axis +/- 105 mm︱B - axis +/- 120 °︱bar material dia. 65 mm︱speed spindle max. S1 5.000 / S2 6.000 U/min.︱spindle bore S1/S2 65/38 mm︱ 12000 1/min︱tool taper Capto C5 ︱toolpiece magazine: chain magazine 76 Stück︱tool turret with 10 work positions ︱total power requirement 45 kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. 2,71 x 2,43 x 2,40 m︱
          MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000
            turning diameter 370 mm
            turning length 424 mm
            control MSX-711-IV Mori Seiki
            swing diameter 370 mm
            X1- Axis 380 mm
            X2- Axis 155 mm
            Z1- Axis 460+155 mm
            Z2- Axis 610 mm
            y-axis +/- 105 mm
            B - axis +/- 120 °
            bar material dia. 65 mm
            speed spindle max. S1 5.000 / S2 6.000 U/min.
            spindle bore S1/S2 65/38 mm
            12000 1/min
            tool taper Capto C5
            toolpiece magazine: chain magazi. 76 Stück
            total power requirement 45 kW
            weight of the machine ca. 10,5 t
            dimensions of the machine ca. 2,71 x 2,43 x 2,40 m
            Description :
            MAPPS control system
            Renishaw HPRA (manual tool presetter)
            Blum Laser Control
            Direct measuring system X;Y;Z;B
            Collet chuck SMW Autoblok KSZ-MB-040-Z140
            Workpiece conveyor belt
            Bar feeder Breuning Irco ILS-RBK-10012
            Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar
            Chip conveyor ConSep 2000


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI NLX 2500 SY / 1250


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9064 · CNC Turning- and Milling Center

          MORI SEIKI - NLX 2500 SY / 1250 - - 2011 - M 730 BM MAPPS IV

          Technical details
          turning diameter max. 356 mm︱turning length 1.255 mm︱control M 730 BM MAPPS IV︱greates pass round over bed 920 mm︱Swing dia. over traverse guideway 742 mm︱distance between spindles 1.511 mm︱Main spindle: ︱turning speed range - main spindle 4.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱spindle nose JIS A-8 ︱spindle bore 91 mm︱max. bar capacity 80 mm︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱spindle bore 43 mm︱axis stroke: ︱x-travel 260 mm︱z-travel 1.345 mm︱Y - Axis +/-50 mm︱
          CNC - Turning- and MillingCenter DMG MORI SEIKI - NLX 2500 SY / 1250 - Subspindle - only 9.600 Spindle hours (May 2023)
            turning diameter max. 356 mm
            turning length 1.255 mm
            control M 730 BM MAPPS IV
            greates pass round over bed 920 mm
            Swing dia. over traverse guidewa. 742 mm
            distance between spindles 1.511 mm
            turning speed range - main spind. 4.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            spindle nose JIS A-8
            spindle bore 91 mm
            max. bar capacity 80 mm
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            spindle bore 43 mm
            x-travel 260 mm
            z-travel 1.345 mm
            Y - Axis +/-50 mm
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI SEIKI - NLX 2500 SY / 1250

            - Subspindle
            - only 9.600 Spindle hours (May 2023)



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3 Y3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9114 · CNC Turning- and Milling Center

          MORI SEIKI - NZ 2000 T3 Y3 - - 2011 - MSX 701 IV / MAPPS IV

          Technical details
          turning diameter max. 320 mm︱turning length max. 810 mm︱control MSX 701 IV / MAPPS IV ︱greates pass round over bed 800 mm︱Swing dia. over traverse guideway 800 mm︱distance between spindles 1.130 mm︱standard turning dia. 200 mm︱Main spindle: ︱Number of revolutions max. 5.000 min/-1︱power capacity - main spindel 25 / 22 kW︱max. Torque 358 Nm︱spindle diameter in front bearing 120 mm︱spindle bore 73 mm︱Bar feed max. 65 mm︱C-Axis 0,001 °︱spindle nose JIS A2-6 ︱Subspindel: ︱Number of revolutions max. 5.000 min/-1︱power capacity - Sub spindle 25 / 22 kW︱max. Torque 358 Nm︱
          CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T3 Y3 - Main- and Subspindle - 3 turrets, 2 upper, 1 below - 3 Y-Axis - 3x 16 driven tool stations - extensive accessory package
            turning diameter max. 320 mm
            turning length max. 810 mm
            control MSX 701 IV / MAPPS IV
            greates pass round over bed 800 mm
            Swing dia. over traverse guidewa. 800 mm
            distance between spindles 1.130 mm
            standard turning dia. 200 mm
            Number of revolutions max. 5.000 min/-1
            power capacity - main spindel 25 / 22 kW
            max. Torque 358 Nm
            spindle diameter in front bearin. 120 mm
            spindle bore 73 mm
            Bar feed max. 65 mm
            C-Axis 0,001 °
            spindle nose JIS A2-6
            Number of revolutions max. 5.000 min/-1
            power capacity - Sub spindle 25 / 22 kW
            max. Torque 358 Nm
            Description :
            CNC - Turning- and MillingCenter
            MORI SEIKI - NZ 2000 T3 Y3

            - Main- and Subspindle
            - 3 turrets, 2 upper, 1 below
            - 3 Y-Axis
            - 3x 16 driven tool stations

            - extensive accessory package



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI DURA TURN 310 ECO


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03952 · CNC Turning- and Milling Center

          MORI SEIKI - DURA TURN 310 ECO - - 2010 - MSX 853 MITSUBISHI MIT M

          Technical details
          turning diameter 330 mm︱turning length 400 mm︱control MSX 853 MITSUBISHI MIT M ︱swing dia. 400 / 300 mm︱rapid power traverse in X-and Z direction 18/24 m/min︱Travel x/z 160 / 450 mm︱bar material dia. 51 mm︱spindle drive 13.5 kW︱Spindle RPM 50 - 5000 U/min︱Spindle Torque 143 Nm︱spindle nose JIS A2-5 ︱Turret positions 12 / 6 ︱work piece power 3,7 kW︱RPM of rotary tools 4000 U/min︱tailstock quill taper MT 4 ︱tailstock quill stroke 80 mm︱tailstock quill diameter 75 mm︱Tailstock Travel 450 mm︱coolant ︱total power requirement 25 kW︱
          NICE MACHINE with MSX 853 IV MAPPS - Programming - driven tools - tail stock - coolant equipment CHIP CONVEYOR
            turning diameter 330 mm
            turning length 400 mm
            control MSX 853 MITSUBISHI MIT M
            swing dia. 400 / 300 mm
            rapid power traverse in X-and Z . 18/24 m/min
            Travel x/z 160 / 450 mm
            bar material dia. 51 mm
            spindle drive 13.5 kW
            Spindle RPM 50 - 5000 U/min
            Spindle Torque 143 Nm
            spindle nose JIS A2-5
            Turret positions 12 / 6
            work piece power 3,7 kW
            RPM of rotary tools 4000 U/min
            tailstock quill taper MT 4
            tailstock quill stroke 80 mm
            tailstock quill diameter 75 mm
            Tailstock Travel 450 mm
            total power requirement 25 kW
            Description :
            NICE MACHINE
            with MSX 853 IV MAPPS - Programming
            - driven tools
            - tail stock
            - coolant equipment
            CHIP CONVEYOR


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI NZ 1500 T3Y3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9053 · CNC Turning- and Milling Center

          MORI SEIKI - NZ 1500 T3Y3 - - 2008 - MSX 701 MAPPS III

          Technical details
          turning diameter max. 320 mm︱turning length 810 mm︱control MSX 701 MAPPS III︱standard turning dia. 200 mm︱Main spindle: ︱Number of revolutions max. 6.000 min/-1︱power capacity - main spindel 22 / 18,5 kW︱Bar feed max. 52 mm︱spindle bore 61 mm︱C-Axis 0,001 °︱Subspindel: ︱Number of revolutions max. 6.000 min/-1︱power capacity - Sub spindle 22 / 18,5 kW︱Bar feed max. 52 mm︱spindle bore 61 mm︱C-Axis 0,001 °︱Turret 1 + 3: ︱number of toolpositions je 16 pos.︱Number of driven toolspositions je 16 pos.︱Spindle speed - driven tools max. 6.000 min -1︱
          CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device
            turning diameter max. 320 mm
            turning length 810 mm
            control MSX 701 MAPPS III
            standard turning dia. 200 mm
            Number of revolutions max. 6.000 min/-1
            power capacity - main spindel 22 / 18,5 kW
            Bar feed max. 52 mm
            spindle bore 61 mm
            C-Axis 0,001 °
            Number of revolutions max. 6.000 min/-1
            power capacity - Sub spindle 22 / 18,5 kW
            Bar feed max. 52 mm
            spindle bore 61 mm
            C-Axis 0,001 °
            number of toolpositions je 16 pos.
            Number of driven toolspositions je 16 pos.
            Spindle speed - driven tools max. 6.000 min -1
            Description :
            CNC - Turning- and MillingCenter
            MORI SEIKI - NZ 1500 T3Y3

            - Main- and Subspindle
            - 3 turrets, 2x upper / 1x below
            - 3x Y-Axis
            - 3x 16-pos. tool-drive

            - incl. 28x collets
            - incl. Hainbuch changing device



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI SL 153 SY


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03910 · CNC Turning- and Milling Center

          MORI SEIKI - SL 153 SY - - 2001 - MSG 501 FANUC

          Technical details
          turning diameter 400 mm︱turning length 520 mm︱control MSG 501 FANUC ︱swing dia. 400 / 300 mm︱rapid power traverse in X-and Z direction 18/24 m/min︱Travel x/z 222 / 560 mm︱bar material dia. 51 mm︱spindle drive 11 / 7,5 kW︱Spindle RPM 50 - 6000 U/min︱Spindle Torque 143 Nm︱spindle nose JIS A2-5 ︱Turret positions 12 / 6 ︱work piece power 3,7 kW︱RPM of rotary tools 3000 U/min︱coolant ︱total power requirement 25 kW︱weight of the machine ca. 3,9 t︱dimensions of the machine ca. 3.3 x 1,90 x 1,90 m︱
          WITH C + Y AXIS MSG FANUC 501 - Programming - driven tools SUP SPINDEL - coolant equipment SHIP CONVEYOR
            turning diameter 400 mm
            turning length 520 mm
            control MSG 501 FANUC
            swing dia. 400 / 300 mm
            rapid power traverse in X-and Z . 18/24 m/min
            Travel x/z 222 / 560 mm
            bar material dia. 51 mm
            spindle drive 11 / 7,5 kW
            Spindle RPM 50 - 6000 U/min
            Spindle Torque 143 Nm
            spindle nose JIS A2-5
            Turret positions 12 / 6
            work piece power 3,7 kW
            RPM of rotary tools 3000 U/min
            total power requirement 25 kW
            weight of the machine ca. 3,9 t
            dimensions of the machine ca. 3.3 x 1,90 x 1,90 m
            Description :
            WITH C + Y AXIS
            MSG FANUC 501 - Programming
            - driven tools
            SUP SPINDEL
            - coolant equipment
            SHIP CONVEYOR


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI SL 150 SMC


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03607 · CNC Turning- and Milling Center

          MORI SEIKI - SL 150 SMC - - 1997 - fanuc 16 T

          Technical details
          turning diameter 420 mm︱turning length 560 mm︱control fanuc 16 T ︱swing dia. 455 mm︱rapid power traverse in X-and Z direction 18/24 m/min︱Travel x/z 220 / 520 mm︱bar material dia. 45 mm︱spindle drive 11 / 7,5 kW︱Spindle RPM 50 - 5000 U/min︱Spindle Torque 143 Nm︱spindle nose JIS A2-5 ︱Turret positions 12 ︱tailstock quill taper MT 4 ︱tailstock quill stroke 80 mm︱tailstock quill diameter 75 mm︱Tailstock Travel 450 mm︱coolant ︱total power requirement 25 kW︱
          WHIT FANUC 16 T CONTROL SUP SPINDEL C AXIS LIVE TOOLS X 5 PARTS CATCHER COLLECT CUCK OFF MAIN SPINDEL AND 3 JAW CHUCK OFF SUP SPINDEL - coolant equipment SHIP CONVEYOR
            turning diameter 420 mm
            turning length 560 mm
            control fanuc 16 T
            swing dia. 455 mm
            rapid power traverse in X-and Z . 18/24 m/min
            Travel x/z 220 / 520 mm
            bar material dia. 45 mm
            spindle drive 11 / 7,5 kW
            Spindle RPM 50 - 5000 U/min
            Spindle Torque 143 Nm
            spindle nose JIS A2-5
            Turret positions 12
            tailstock quill taper MT 4
            tailstock quill stroke 80 mm
            tailstock quill diameter 75 mm
            Tailstock Travel 450 mm
            total power requirement 25 kW
            Description :
            WHIT FANUC 16 T CONTROL
            SUP SPINDEL
            C AXIS LIVE TOOLS X 5
            PARTS CATCHER
            COLLECT CUCK OFF MAIN SPINDEL AND 3 JAW CHUCK OFF SUP SPINDEL
            - coolant equipment
            SHIP CONVEYOR


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI SL 150 MC


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03539 · CNC Turning- and Milling Center

          MORI SEIKI - SL 150 MC - - 1996 - fanuc 18 T

          Technical details
          turning diameter 420 mm︱turning length 560 mm︱control fanuc 18 T ︱swing dia. 455 mm︱rapid power traverse in X-and Z direction 18/24 m/min︱Travel x/z 220 / 520 mm︱bar material dia. 45 mm︱spindle drive 11 / 7,5 kW︱Spindle RPM 50 - 5000 U/min︱Spindle Torque 143 Nm︱spindle nose JIS A2-5 ︱Turret positions 12 ︱tailstock quill taper MT 4 ︱tailstock quill stroke 80 mm︱tailstock quill diameter 75 mm︱Tailstock Travel 450 mm︱coolant ︱total power requirement 25 kW︱
          3 AXIS MACHINE WITH LIVE TOOLS tail stock - coolant equipment CHIP CONVEYOR
            turning diameter 420 mm
            turning length 560 mm
            control fanuc 18 T
            swing dia. 455 mm
            rapid power traverse in X-and Z . 18/24 m/min
            Travel x/z 220 / 520 mm
            bar material dia. 45 mm
            spindle drive 11 / 7,5 kW
            Spindle RPM 50 - 5000 U/min
            Spindle Torque 143 Nm
            spindle nose JIS A2-5
            Turret positions 12
            tailstock quill taper MT 4
            tailstock quill stroke 80 mm
            tailstock quill diameter 75 mm
            Tailstock Travel 450 mm
            total power requirement 25 kW
            Description :
            3 AXIS MACHINE WITH LIVE TOOLS

            tail stock

            - coolant equipment
            CHIP CONVEYOR


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI SL 35 M 750


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8684 · CNC Turning- and Milling Center

          MORI SEIKI - SL 35 M 750 - - 1990 - Fanuc Moric T5F

          Technical details
          turning diameter 460 mm︱turning length 780 mm︱control Fanuc Moric T5F ︱greates pass round over bed 600 mm︱Swing dia. over traverse guideway 425 mm︱centre distance 890 mm︱Main spindle: ︱turning speed range - main spindle 9 - 2.500 min/-1︱power capacity - main spindel 22 / 18,5 kW︱Number of speed ranges 2 ︱chucking diameter 315 mm︱spindle nose JIS A2-8 ︱spindle bore 92 mm︱usable bar diameter (65) mm︱C-Axis 2,5 °︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 6 pos.︱Spindle speed - driven tool stations 67 - 2.000 min -1︱power capacity driven tool-stations 3,7 / 2,2 kW︱
          CNC - Turning- and MillingCenter MORI SEIKI - SL 35 M / 750
            turning diameter 460 mm
            turning length 780 mm
            control Fanuc Moric T5F
            greates pass round over bed 600 mm
            Swing dia. over traverse guidewa. 425 mm
            centre distance 890 mm
            turning speed range - main spind. 9 - 2.500 min/-1
            power capacity - main spindel 22 / 18,5 kW
            Number of speed ranges 2
            chucking diameter 315 mm
            spindle nose JIS A2-8
            spindle bore 92 mm
            usable bar diameter (65) mm
            C-Axis 2,5 °
            number of toolpositions 12 pos.
            Number of driven toolspositions 6 pos.
            Spindle speed - driven tool stat. 67 - 2.000 min -1
            power capacity driven tool-stati. 3,7 / 2,2 kW
            Description :
            CNC - Turning- and MillingCenter
            MORI SEIKI - SL 35 M / 750


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI ZT1000 Y


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-J686 · CNC Turning- and Milling Center

          MORI SEIKI - ZT1000 Y - - 12/2002 - FANUC 18i TB

          Technical details
          control FANUC 18i TB ︱turning diameter 190 mm︱swing diameter 250 mm︱spindle distance 750 mm︱spindle turning speed range -6000 U/min︱turret head 2x 16 ︱tool taper VDI 30 ︱Overall size 3350x2400x2000 mm︱weight of the machine ca. 5.5 t︱
          Y-Axis 2 Spindles 2 turret with each 16 driven positions Robot Misc accessories www.marcels-maschinen.ch
            control FANUC 18i TB
            turning diameter 190 mm
            swing diameter 250 mm
            spindle distance 750 mm
            spindle turning speed range -6000 U/min
            turret head 2x 16
            tool taper VDI 30
            Overall size 3350x2400x2000 mm
            weight of the machine ca. 5.5 t
            Description :
            Y-Axis
            2 Spindles
            2 turret with each 16 driven positions
            Robot
            Misc accessories

            www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          A CNC Turning and Milling Center from LagerMaschinen
          A CNC turning and milling center from LagerMaschinen - good for business

          A CNC turning and milling center from LagerMaschinen will certainly be a great advantage to your small or medium-sized business. Choose from a CNC turning and milling center that fits your needs exactly. A CNC turning and milling center uses either one of multiple axes to calibrate and work wood metal or other hard materials. When purchasing a CNC turning and milling center from LagerMaschinen you'll be able to ensure quality control as well as to speak directly with sellers. Let LagerMaschinen's qualified experts assist you in your search for your next business machine.

          CNC turning and milling center from LagerMaschinen

          A CNC turning and milling center (also known as a lathe) can be used for many different purposes. No matter what your end product a CNC turning and milling center from LagerMaschinen is just what you need. Used machines are more economically viable as well as kinder to the environment. A CNC turning and milling center from LagerMaschinen could be the logical solution for your production concerns. By purchasing your CNC turning and milling center through LagerMaschinen and its team of experts and professionals you'll not only find precisely what you're looking for but will also ensure that it lasts for a lifetime.

          CNC turning and milling center - the most logical choice

          No matter what type of CNC turning and milling center you're looking for LagerMaschinen has what you need. Log on create and account and start shopping at LagerMaschinen today.