,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          CNC-Vertical Turret Lathe - Single Col.

          Machinelist: CNC-Vertical Turret Lathe - Single Col.


          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center CMZ TA 30 Y


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03927 · CNC Turning- and Milling Center

          CMZ - TA 30 Y - - 2019 - fanuc 32 i

          Technical details
          turning diameter 460 mm︱turning length 750 mm︱control fanuc 32 i ︱swing dia. 760 mm︱rapid power traverse in X-and Z direction 18/24 m/min︱chucking diameter 250 mm︱bar material dia. 66 mm︱spindle drive 42 kW︱spindle speed: 3500 ︱max. torque on the spindle 730 ︱spindle nose ASA 8" A2 ︱turret stations / rotary tool stations 12/12 ︱RPM of rotary tools 80-4000 1/min︱tailstock quill taper MT MK4 ︱tailstock quill stroke 100 mm︱tailstock quill diameter 110 mm︱Tailstock Travel 990 mm︱bearing for center in tailstock spindle ︱total power requirement 70 kVA︱weight of the machine ca. 6.1 t︱
          VERY NICE MACHINE ONLY 1900 SPINDEL HOURS SPINDEL BORE DIA 66 MM TURNING LENG 66 MM C AXIS MOWING TOOLS Y AXIS +40/-40MM FANUC 32 I CHIP CONVOYER
            turning diameter 460 mm
            turning length 750 mm
            control fanuc 32 i
            swing dia. 760 mm
            rapid power traverse in X-and Z . 18/24 m/min
            chucking diameter 250 mm
            bar material dia. 66 mm
            spindle drive 42 kW
            spindle speed: 3500
            max. torque on the spindle 730
            spindle nose ASA 8" A2
            turret stations / rotary tool st. 12/12
            RPM of rotary tools 80-4000 1/min
            tailstock quill taper MT MK4
            tailstock quill stroke 100 mm
            tailstock quill diameter 110 mm
            Tailstock Travel 990 mm
            total power requirement 70 kVA
            weight of the machine ca. 6.1 t
            Description :
            VERY NICE MACHINE ONLY 1900 SPINDEL HOURS
            SPINDEL BORE DIA 66 MM
            TURNING LENG 66 MM
            C AXIS MOWING TOOLS
            Y AXIS +40/-40MM
            FANUC 32 I
            CHIP CONVOYER



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TA 15  15 YS 640


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03820 · CNC Turning- and Milling Center

          CMZ - TA 15 15 YS 640 - - 2019 - FANUC 32 ITB

          Technical details
          turning diameter 400 mm︱turning length 640 mm︱control FANUC 32 ITB ︱bar diameter 52 mm︱travel -x axis 310 mm︱travel -z axis 640 mm︱turning speed range - drive spindle 4500 1/min︱spindle nose JIS A2-6 ︱spindle bore 61 mm︱C-Axis 0,001° ︱spindle bearing diameter 100 mm︱turret head 12 Pos. ︱tool changing time 0,2 sec︱rapid traverse X-axis 30 m/min︱rapid traverse Z-axis 30 m/min︱drive capacity - spindle motor 15/11 kW︱total power requirement 35 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 2,7 x 2,2 x 1,9 m︱
          VERY NICE MACHINE WITH FANUC 32 IT CHIP CONVOYOR SUP SPINDEL BAR FEEDER C AXIS AND Y AXIS + LIVE TOOLS
            turning diameter 400 mm
            turning length 640 mm
            control FANUC 32 ITB
            bar diameter 52 mm
            travel -x axis 310 mm
            travel -z axis 640 mm
            turning speed range - drive spin. 4500 1/min
            spindle nose JIS A2-6
            spindle bore 61 mm
            C-Axis 0,001°
            spindle bearing diameter 100 mm
            turret head 12 Pos.
            tool changing time 0,2 sec
            rapid traverse X-axis 30 m/min
            rapid traverse Z-axis 30 m/min
            drive capacity - spindle motor 15/11 kW
            total power requirement 35 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 2,7 x 2,2 x 1,9 m
            Description :
            VERY NICE MACHINE WITH FANUC 32 IT
            CHIP CONVOYOR
            SUP SPINDEL
            BAR FEEDER
            C AXIS AND Y AXIS + LIVE TOOLS


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI CTX alpha 500


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9173 · CNC Turning- and Milling Center

          DMG MORI - CTX alpha 500 - - 2018 - Sinumerik 840 D sl Celos

          Technical details
          turning diameter 240 mm︱turning length 500 mm︱control Sinumerik 840 D sl Celos︱swing diameter max. 510 mm︱Main spindle: ︱turning speed range - main spindle max. 5.500 min/-1︱power capacity - main spindel 14 / 13 kW︱max. Torque 192 / 172 Nm︱inner draw tube diameter 66 mm︱C-Axis 0,001 °︱spindle diameter in front bearing 100 mm︱max. chucking diameter 215 mm︱spindle nose 140H5 ︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱tool taper VDI 30 ︱Spindle speed - driven tool stations max. 5.000 min -1︱power capacity - driven tool-stations 5,4 kW︱max. Torque 18 Nm︱
          CNC - Turning- and MillingCenter DMG GILDEMEISTER - CTX alpha 500 - Very good condition - only 4.400 spindle hours - incl. extensive tool package
            turning diameter 240 mm
            turning length 500 mm
            control Sinumerik 840 D sl Celos
            swing diameter max. 510 mm
            turning speed range - main spind. max. 5.500 min/-1
            power capacity - main spindel 14 / 13 kW
            max. Torque 192 / 172 Nm
            inner draw tube diameter 66 mm
            C-Axis 0,001 °
            spindle diameter in front bearin. 100 mm
            max. chucking diameter 215 mm
            spindle nose 140H5
            number of toolpositions 12 pos.
            Number of driven toolspositions 12 pos.
            tool taper VDI 30
            Spindle speed - driven tool stat. max. 5.000 min -1
            power capacity - driven tool-sta. 5,4 kW
            max. Torque 18 Nm
            Description :
            CNC - Turning- and MillingCenter
            DMG GILDEMEISTER - CTX alpha 500

            - Very good condition
            - only 4.400 spindle hours

            - incl. extensive tool package


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center TAKISAWA LA 250 YS


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03991 · CNC Turning- and Milling Center

          TAKISAWA - LA 250 YS - - 2017 - FANUC 31 ITB

          Technical details
          turning diameter 370 mm︱turning length 737 mm︱control FANUC 31 ITB ︱max. bar capacity 75 mm︱travel -y axis +50, -50 mm︱max. speed main spindle 3500 min-1︱spindle taper 1 A2-6 ︱C - Axis JA ︱no. of tools in turret 1 12 ︱drive capacity - spindle motor 26 kW︱power capacity - driven tools 6.7 kW︱total power requirement 40 kVA︱weight of the machine ca. 7 t︱dimensions of the machine ca. 53.5 X 2.1 X 2 m︱Chip conveyor ja / yes
          High Performance CNC Turning- and Milling Center with Y - Axis Chipconveyer, Counterspindle, driven tools, Y - Axis for eccentric Drilling and Milling works + - 60 mm C-Axis, screw brake, partcatcher, 3 driven tools as accessories, 10 static holder as accessories, , Toolsystem with one collet each for Main - and Subspindle, Tool Eye Measurement, Part catcher and part conveyer WHITOUT BAR LODER
            turning diameter 370 mm
            turning length 737 mm
            control FANUC 31 ITB
            max. bar capacity 75 mm
            travel -y axis +50, -50 mm
            max. speed main spindle 3500 min-1
            spindle taper 1 A2-6
            C - Axis JA
            no. of tools in turret 1 12
            drive capacity - spindle motor 26 kW
            power capacity - driven tools 6.7 kW
            total power requirement 40 kVA
            weight of the machine ca. 7 t
            dimensions of the machine ca. 53.5 X 2.1 X 2 m
            Chip conveyor ja / yes
            Description :
            High Performance CNC Turning- and Milling Center with Y - Axis
            Chipconveyer, Counterspindle, driven tools,
            Y - Axis for eccentric Drilling and Milling works + - 60 mm
            C-Axis, screw brake, partcatcher, 3 driven tools as accessories, 10 static
            holder as accessories, , Toolsystem with one collet each for
            Main - and Subspindle, Tool Eye Measurement, Part catcher and part conveyer
            WHITOUT BAR LODER


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI CTX beta 800


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-033890 · CNC Turning- and Milling Center

          DMG MORI - CTX beta 800 - - 2017 - Sinumerik 840D sl Siemens

          Technical details
          turning diameter max. 410 mm︱turning length 800 mm︱control Sinumerik 840D sl Siemens︱greates pass round over bed 700 mm︱Main spindle: ︱turning speed range - main spindle 20 - 5.000 min/-1︱power capacity - main spindel 34 / 25 kW︱max. Torque 580 Nm︱C-Axis 360 °︱spindle nose 220h5 ︱chucking diameter 250 mm︱max. bar capacity 76 mm︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱power capacity driven tool-stations 14,2 kW︱Spindle speed - driven tool stations 40 - 10.000 min -1︱tool taper VDI 40 DIN69880︱max. Torque 34 Nm︱axis stroke:
          CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 - Sinumerik Operate und ShopTurn 3G - Spindle ISM 76 - Y-Axis - WITH Tools + SUP SPINDEL
            turning diameter max. 410 mm
            turning length 800 mm
            control Sinumerik 840D sl Siemens
            greates pass round over bed 700 mm
            turning speed range - main spind. 20 - 5.000 min/-1
            power capacity - main spindel 34 / 25 kW
            max. Torque 580 Nm
            C-Axis 360 °
            spindle nose 220h5
            chucking diameter 250 mm
            max. bar capacity 76 mm
            number of toolpositions 12 pos.
            Number of driven toolspositions 12 pos.
            power capacity driven tool-stati. 14,2 kW
            Spindle speed - driven tool stat. 40 - 10.000 min -1
            tool taper VDI 40 DIN69880
            max. Torque 34 Nm
            Description :
            CNC - Turning- and Millingcenter
            DMG MORI - CTX beta 800

            - Sinumerik Operate und ShopTurn 3G
            - Spindle ISM 76
            - Y-Axis
            - WITH Tools
            + SUP SPINDEL



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NLX 2000 Y / 500


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9155 · CNC Turning- and Milling Center

          DMG MORI - NLX 2000 Y / 500 - - 2016 - ErgoLine CELOS

          Technical details
          turning diameter max. 366 mm︱turning length 510 mm︱control ErgoLine CELOS︱greates pass round over bed 923,8 mm︱Swing dia. over traverse guideway 755 mm︱standard turning dia. 275 mm︱distance between spindles 500 mm︱Main spindle: ︱turning speed range - main spindle 5.000 min/-1︱power capacity - main spindel 15 / 11 kW︱spindle nose JIS A-6 ︱spindle bearing diameter 120 mm︱spindle bore 73 mm︱max. usable bar diameter 65 mm︱C-Axis 0,001 °︱chucking diameter ( - ) mm︱axis stroke: ︱x-travel 260 mm︱z-travel 590 mm︱Y - Axis (100) +/-50 mm︱
          CNC - Turning- and MillingCenter DMG MORI - NLX 2000 Y / 500 - C-Axis - Y-Axis - Tool-Drive - WITHOUT Toolholders!
            turning diameter max. 366 mm
            turning length 510 mm
            control ErgoLine CELOS
            greates pass round over bed 923,8 mm
            Swing dia. over traverse guidewa. 755 mm
            standard turning dia. 275 mm
            distance between spindles 500 mm
            turning speed range - main spind. 5.000 min/-1
            power capacity - main spindel 15 / 11 kW
            spindle nose JIS A-6
            spindle bearing diameter 120 mm
            spindle bore 73 mm
            max. usable bar diameter 65 mm
            C-Axis 0,001 °
            chucking diameter ( - ) mm
            x-travel 260 mm
            z-travel 590 mm
            Y - Axis (100) +/-50 mm
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI - NLX 2000 Y / 500

            - C-Axis
            - Y-Axis
            - Tool-Drive
            - WITHOUT Toolholders!


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI SEIKI NT 6600 DCG / 3000 BS


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9119 · CNC Turning- and Milling Center

          DMG MORI SEIKI - NT 6600 DCG / 3000 BS - - 2015 - Fanuc 31iB5 MAPPS

          Technical details
          turning diameter max. 1.070 mm︱turning length max. 3.076 mm︱control Fanuc 31iB5 MAPPS︱max. swing diameter 1.070 mm︱Max. distance between centres 3.510 mm︱axis stroke: ︱x-axis 1.040 (1.000 + 40) mm︱y-axis +/- 330 mm︱z-axis 3.150 mm︱b-axis +/- 120 °︱z-axis 2: max. 2.440 mm︱Main spindle: ︱max. spindle speed 1.500 min/-1︱Number of speed ranges 2 ︱power capacity - main spindel 30 / 26 kW︱max. Torque 3.254 Nm︱spindle bearing diameter 260 mm︱spindle bore 185 mm︱max. usable bar diameter 164 mm︱C-Axis 0,0001 °︱
          CNC-HighPerformance-Turning- and Millingcenter DMG MORI SEIKI - NT 6600 DCG / 3000 BS - Main- and Subspindle - Tool-Spindle - 2x Three-Jaw-Chuck "SCHUNK - ROTA THW 500-128" - 1x Steady-Rest "SMW AutoBLOK - SLU 6ZS 125-460"mm - Operating-Hours: Power-On: ca. 23.000h Operating: ca. 6.400h Cutting: ca. 5.000h
            turning diameter max. 1.070 mm
            turning length max. 3.076 mm
            control Fanuc 31iB5 MAPPS
            max. swing diameter 1.070 mm
            Max. distance between centres 3.510 mm
            x-axis 1.040 (1.000 + 40) mm
            y-axis +/- 330 mm
            z-axis 3.150 mm
            b-axis +/- 120 °
            z-axis 2: max. 2.440 mm
            max. spindle speed 1.500 min/-1
            Number of speed ranges 2
            power capacity - main spindel 30 / 26 kW
            max. Torque 3.254 Nm
            spindle bearing diameter 260 mm
            spindle bore 185 mm
            max. usable bar diameter 164 mm
            C-Axis 0,0001 °
            Description :
            CNC-HighPerformance-Turning- and Millingcenter
            DMG MORI SEIKI - NT 6600 DCG / 3000 BS

            - Main- and Subspindle
            - Tool-Spindle
            - 2x Three-Jaw-Chuck "SCHUNK - ROTA THW 500-128"
            - 1x Steady-Rest "SMW AutoBLOK - SLU 6ZS 125-460"mm

            - Operating-Hours:
            Power-On: ca. 23.000h
            Operating: ca. 6.400h
            Cutting: ca. 5.000h


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX beta 500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03812 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX beta 500 - - 2014 - 840 D SL SIEMENS

          Technical details
          turning diameter 410 mm︱turning length 850 mm︱control 840 D SL SIEMENS︱greates pass round over bed 500 mm︱Main spindle: ︱turning speed range - main spindle 25 - 5.000 min/-1︱power capacity - main spindel 25 / 34 kW︱max. Torque 280 Nm︱C-Axis 0,01 °︱spindle nose 170 h5 ︱max. chucking diameter 210 mm︱chucking diameter 250 mm︱spindle diameter in front bearing 130 mm︱spindle bore 87 mm︱max. bar capacity 77 mm︱turret: ︱number of toolpositions 16 pos.︱Number of driven toolspositions 16 pos.︱power capacity driven tool-stations 11,3 kW︱Spindle speed - driven tool stations max. 4.000 min -1︱
          CNC - Turning- and Millingcenter GILDEMEISTER - CTX beta 500 - Operating-Hours: Spindle-Runtime: ca.100h NEW SPINDEL -INTER FACE FOR Bar-Feede - C-Axis - Y-Axis CHIP CONVOYER CHUCK DIA 210 MM
            turning diameter 410 mm
            turning length 850 mm
            control 840 D SL SIEMENS
            greates pass round over bed 500 mm
            turning speed range - main spind. 25 - 5.000 min/-1
            power capacity - main spindel 25 / 34 kW
            max. Torque 280 Nm
            C-Axis 0,01 °
            spindle nose 170 h5
            max. chucking diameter 210 mm
            chucking diameter 250 mm
            spindle diameter in front bearin. 130 mm
            spindle bore 87 mm
            max. bar capacity 77 mm
            number of toolpositions 16 pos.
            Number of driven toolspositions 16 pos.
            power capacity driven tool-stati. 11,3 kW
            Spindle speed - driven tool stat. max. 4.000 min -1
            Description :
            CNC - Turning- and Millingcenter
            GILDEMEISTER - CTX beta 500

            - Operating-Hours: Spindle-Runtime: ca.100h NEW SPINDEL
            -INTER FACE FOR Bar-Feede
            - C-Axis
            - Y-Axis
            CHIP CONVOYER
            CHUCK DIA 210 MM





        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG-GILDEMEISTER CTX beta 1250 TC


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03915 · CNC Turning- and Milling Center

          DMG-GILDEMEISTER - CTX beta 1250 TC - - 2014 - SIEMENS 840

          Technical details
          turning diameter 390 mm︱turning length 1250 mm︱control SIEMENS 840︱total power requirement kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. m︱
            turning diameter 390 mm
            turning length 1250 mm
            control SIEMENS 840
            weight of the machine ca. 11 t


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX IT 600


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02959 · CNC Turning- and Milling Center

          INDEX - IT 600 - - 2014 - Fanuc 32i-B

          Technical details
          turning diameter 65 mm︱turning length 150 mm︱control Fanuc 32i-B ︱Number of working hours 11028 h︱chuck diameter 250 mm︱turning speeds 4000 U/min︱turret (x-stations) 14 VDI 30︱Number of axles 3 (X-Y-Z) St.︱turret (x-stations) 7 VDI 30︱Number of axles 2 (X-Z) St.︱c-axis 0,001 °︱y-Axis min./max. +/-75 mm︱chip conveyor Knoll 400 S-1/335 Bj. 2013︱total power requirement 18,5 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 4,7 x 1,72 x 2,16 m︱Handling system FMB Unirobot M-10iA 12-7P Bj. 2017︱driven tools 7 Rev.1 Stationen︱
          CNC universal lathe INDEX IT600, year of manufacture 2014 - The following accessories would be supplied: o 2-jaw chuck Schunk ROTA 2B 200 o approx. 40 sets of clamping jaws o Approx. 45 tool holders (1x driven), but without cutting tool holder/ cutting tool o Compact handling system FMB unirobot M-10iA-12-7P o 12x 7 pallets each for various blanks Option: It would be ideal if the buyer could machine forged blanks for us in the future. We cannot define an article list in advance, but the machine utilisation would be approx. 10% of the annual capacity. Previously used for machine loading with forged blanks in the moulds Angle, cross and T-piece. Can also be used for saw cuts. However, this does not require pallets, grippers and clamping devices are available.
            turning diameter 65 mm
            turning length 150 mm
            control Fanuc 32i-B
            Number of working hours 11028 h
            chuck diameter 250 mm
            turning speeds 4000 U/min
            turret (x-stations) 14 VDI 30
            Number of axles 3 (X-Y-Z) St.
            turret (x-stations) 7 VDI 30
            Number of axles 2 (X-Z) St.
            c-axis 0,001 °
            y-Axis min./max. +/-75 mm
            chip conveyor Knoll 400 S-1/335 Bj. 2013
            total power requirement 18,5 kW
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 4,7 x 1,72 x 2,16 m
            Handling system FMB Unirobot M-10iA 12-7P Bj. 2017
            driven tools 7 Rev.1 Stationen
            Description :
            CNC universal lathe INDEX IT600, year of manufacture 2014

            - The following accessories would be supplied:
            o 2-jaw chuck Schunk ROTA 2B 200
            o approx. 40 sets of clamping jaws
            o Approx. 45 tool holders (1x driven), but without cutting tool holder/
            cutting tool
            o Compact handling system FMB unirobot M-10iA-12-7P
            o 12x 7 pallets each for various blanks

            Option:
            It would be ideal if the buyer could machine forged blanks for us in the future.
            We cannot define an article list in advance, but the machine utilisation would
            be approx. 10% of the annual capacity.

            Previously used for machine loading with forged blanks in the moulds
            Angle, cross and T-piece.
            Can also be used for saw cuts. However, this does not require
            pallets, grippers and clamping devices are available.



        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI CTX beta 1250 TC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20063 · CNC Turning- and Milling Center

          DMG MORI - CTX beta 1250 TC - - 2014 - Siemens 840D

          Technical details
          turning diameter 500 mm︱turning length 1200 mm︱control Siemens 840D ︱greates pass round over bed 700 mm︱Main spindle: ︱turning speed range - main spindle 20 - 5000 min/-1︱power capacity - main spindel 25 /34 kW︱C-Axis 0,0001 °︱spindle diameter 67 mm︱milling spindle ︱milling spindle motor 23 / 13 kW︱milling head speed 18000 U/min︱b-axis +/- 120 °︱axis stroke: ︱x-axis 490 mm︱y-axis +/- 100 mm︱z-axis 1300 mm︱feeds: ︱rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min︱feed power 5,6 / 5,6 / 7,4 kN︱
          CNC - Turning and milling center - 5 axes - CNC control Siemens 840D Ergo Line with ShopTurn - C-axis (0,0001°) - Milling head with B-axis - Y-axis - Coolant device/paper belt filter - chip conveyor - Tool changer 24-fold (HSK A63) - Direct measuring system - IKZ 25bar - Tailstock
            turning diameter 500 mm
            turning length 1200 mm
            control Siemens 840D
            greates pass round over bed 700 mm
            turning speed range - main spind. 20 - 5000 min/-1
            power capacity - main spindel 25 /34 kW
            C-Axis 0,0001 °
            spindle diameter 67 mm
            milling spindle motor 23 / 13 kW
            milling head speed 18000 U/min
            b-axis +/- 120 °
            x-axis 490 mm
            y-axis +/- 100 mm
            z-axis 1300 mm
            rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min
            feed power 5,6 / 5,6 / 7,4 kN
            Description :
            CNC - Turning and milling center - 5 axes
            - CNC control Siemens 840D Ergo Line with ShopTurn
            - C-axis (0,0001°)
            - Milling head with B-axis
            - Y-axis
            - Coolant device/paper belt filter
            - chip conveyor
            - Tool changer 24-fold (HSK A63)
            - Direct measuring system
            - IKZ 25bar
            - Tailstock


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NLX 2500 SY / 700


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9153 · CNC Turning- and Milling Center

          DMG MORI - NLX 2500 SY / 700 - - 2014 - M 730 BM MAPPS IV

          Technical details
          turning diameter max. 366 mm︱turning length 705 mm︱control M 730 BM MAPPS IV︱greates pass round over bed 920 mm︱Swing dia. over traverse guideway 742 mm︱Main spindle: ︱turning speed range - main spindle 4.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱spindle nose JIS A-8 ︱spindle bearing diameter 140 mm︱spindle bore 91 mm︱max. usable bar diameter 80 mm︱chucking diameter 250 mm︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱spindle nose JIS A2-5 ︱spindle bearing diameter 85 mm︱spindle bore 43 mm︱max. usable bar diameter ( - ) mm︱
          CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive
            turning diameter max. 366 mm
            turning length 705 mm
            control M 730 BM MAPPS IV
            greates pass round over bed 920 mm
            Swing dia. over traverse guidewa. 742 mm
            turning speed range - main spind. 4.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            spindle nose JIS A-8
            spindle bearing diameter 140 mm
            spindle bore 91 mm
            max. usable bar diameter 80 mm
            chucking diameter 250 mm
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            spindle nose JIS A2-5
            spindle bearing diameter 85 mm
            spindle bore 43 mm
            max. usable bar diameter ( - ) mm
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI - NLX 2500 SY / 700

            - Main- and Subspindle
            - C-Axis
            - Y-Axis
            - Tool-Drive


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center VICTOR V-turn X200


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-V2451 · CNC Turning- and Milling Center

          VICTOR - V-turn X200 - - 2014 - Fanuc Series 31i-A

          Technical details
          Control Fanuc Series 31i-A ︱Turning diameter 540 mm︱Turning length 1000 mm︱Spindle bore diameter 52 mm︱Spindle nose A 2-6 ︱Spindle nose sub spindle ︱Turning speed 4200 1/min︱Turning speed sub spindle 1/min︱Milling head speed 12.000 1/min︱Movement X-axis 600 mm︱Movement Y-axis +/- 80 mm︱Movement Z-axis 1100 mm︱B-Axis travel +110 / -115 °︱C-Axis indexing 360 °︱Tool Taper HSK 63 ︱Tools in tool magazine 40 ︱Length 6000 mm︱Width 2314 mm︱Height 2820 mm︱Weight 12.000 kg︱
            Control Fanuc Series 31i-A
            Turning diameter 540 mm
            Turning length 1000 mm
            Spindle bore diameter 52 mm
            Spindle nose A 2-6
            Turning speed 4200 1/min
            Milling head speed 12.000 1/min
            Movement X-axis 600 mm
            Movement Y-axis +/- 80 mm
            Movement Z-axis 1100 mm
            B-Axis travel +110 / -115 °
            C-Axis indexing 360 °
            Tool Taper HSK 63
            Tools in tool magazine 40
            Length 6000 mm
            Width 2314 mm
            Height 2820 mm
            Weight 12.000 kg
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAZAK Integrex i-100S


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20313 · CNC Turning- and Milling Center

          MAZAK - Integrex i-100S - - 2013 - Mazatrol Matrix 2

          Technical details
          turning diameter 500 mm︱turning length 854 mm︱control Mazatrol Matrix 2 ︱Main Spindle: ︱c-axis 0,0001 °︱chucking diameter 6 "︱spindle motor 11 kW︱spindle turning speed range 6000 U/min︱x-axis 450 mm︱z-axis 904 mm︱y-axis 210 mm︱w-axis 903 mm︱b-axis -30 / +210 °︱bar material dia. 51 mm︱Rapid Travel X / Y / Z-Achse 40 m/min︱2nd Spindle: ︱c-axis 0,0001 °︱power capacity 11 kW︱spindle turning speed range 6000 U/min︱milling spindle
          5-axis simultaneous machining - CNC control Mazatrol Matrix 2 - Main & counter spindle - 6" chuck (B206) - Tool changer (36-fold) HSK - Coolant system - Chip tray
            turning diameter 500 mm
            turning length 854 mm
            control Mazatrol Matrix 2
            c-axis 0,0001 °
            chucking diameter 6 "
            spindle motor 11 kW
            spindle turning speed range 6000 U/min
            x-axis 450 mm
            z-axis 904 mm
            y-axis 210 mm
            w-axis 903 mm
            b-axis -30 / +210 °
            bar material dia. 51 mm
            Rapid Travel X / Y / Z-Achse 40 m/min
            c-axis 0,0001 °
            power capacity 11 kW
            spindle turning speed range 6000 U/min
            Description :
            5-axis simultaneous machining
            - CNC control Mazatrol Matrix 2
            - Main & counter spindle
            - 6" chuck (B206)
            - Tool changer (36-fold) HSK
            - Coolant system
            - Chip tray


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN DAEWOO PUMA TT 1500 Y


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03871 · CNC Turning- and Milling Center

          DOOSAN DAEWOO - PUMA TT 1500 Y - - 2012 - FANUC 18 iTB

          Technical details
          turning diameter 500 mm︱turning length 200 mm︱control FANUC 18 iTB ︱travel -x axis 165 mm︱travel -y axis 100 +/-50 mm︱travel -z axis 470 mm︱rapid travel - longitudinal/face 24 m/min︱rapid motion - y-axis 16 m/min︱c-axis 20 min-¹︱spindle bore diameter 65 mm︱spindle drive 15 kW︱milling spindle motor 5.5 kW︱spindle speed: 5000 min-¹︱Number tool positions lower turret 12 ︱Stations which are driven 2 X 12 ︱total power requirement ca 40 kVA︱weight of the machine ca. 5.500 kg︱dimensions of the machine ca. 3.5 x 1.8 x 2 m︱
          PUMA 2500 LSY - Control Fanuc 18i TB - Spindle bore 65 - SPINDEL 1 COLLET CHUCK - The machine has 470 mm turn length - Bal screw instead of Rack and Pineon 2 X turret WITH 12 POSITION - Swarf conveyor - Interface for bar Feed - Automatic tool measuring - High preassure coolant pump 7 bar IEMCA BAR FEEDER
            turning diameter 500 mm
            turning length 200 mm
            control FANUC 18 iTB
            travel -x axis 165 mm
            travel -y axis 100 +/-50 mm
            travel -z axis 470 mm
            rapid travel - longitudinal/face 24 m/min
            rapid motion - y-axis 16 m/min
            c-axis 20 min-¹
            spindle bore diameter 65 mm
            spindle drive 15 kW
            milling spindle motor 5.5 kW
            spindle speed: 5000 min-¹
            Number tool positions lower turr. 12
            Stations which are driven 2 X 12
            total power requirement ca 40 kVA
            weight of the machine ca. 5.500 kg
            dimensions of the machine ca. 3.5 x 1.8 x 2 m
            Description :
            PUMA 2500 LSY
            - Control Fanuc 18i TB
            - Spindle bore 65
            - SPINDEL 1 COLLET CHUCK
            - The machine has 470 mm turn length
            - Bal screw instead of Rack and Pineon
            2 X turret WITH 12 POSITION
            - Swarf conveyor
            - Interface for bar Feed
            - Automatic tool measuring
            - High preassure coolant pump 7 bar
            IEMCA BAR FEEDER


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN daewoo PUMA  2100 lm


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03941 · CNC Turning- and Milling Center

          DOOSAN daewoo - PUMA 2100 lm - - 2012 - FANUC

          Technical details
          turning diameter 406 mm︱turning length 830 mm︱control FANUC ︱travel -x axis 260 mm︱travel -z axis 830 mm︱rapid travel - longitudinal/face 24 m/min︱c-axis 20 min-¹︱spindle bore diameter 76 mm︱spindle drive 18.5 kW︱milling spindle motor 7.5 kW︱spindle speed: 4500 min-¹︱Number tool positions lower turret 12 ︱Stations which are driven 12 ︱total power requirement ca 40 kVA︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. 3.5 x 2.3 x 2.2 m︱
          PUMA 2100 LM - Control FANUC - Spindle bore 76 - SPINDEL 1 CHUCK 25 MM 18.5 KW 4500 RPM - The machine has 1830 mm turn length - Bal screw instead of Rack and Pineon turret has 12 POSITION Swarf conveyor - High preassure coolant pump 7 bar STAEDY DIA 20-180 MM
            turning diameter 406 mm
            turning length 830 mm
            control FANUC
            travel -x axis 260 mm
            travel -z axis 830 mm
            rapid travel - longitudinal/face 24 m/min
            c-axis 20 min-¹
            spindle bore diameter 76 mm
            spindle drive 18.5 kW
            milling spindle motor 7.5 kW
            spindle speed: 4500 min-¹
            Number tool positions lower turr. 12
            Stations which are driven 12
            total power requirement ca 40 kVA
            weight of the machine ca. 7000 kg
            dimensions of the machine ca. 3.5 x 2.3 x 2.2 m
            Description :
            PUMA 2100 LM
            - Control FANUC
            - Spindle bore 76
            - SPINDEL 1 CHUCK 25 MM 18.5 KW 4500 RPM
            - The machine has 1830 mm turn length
            - Bal screw instead of Rack and Pineon
            turret has 12 POSITION
            Swarf conveyor
            - High preassure coolant pump 7 bar
            STAEDY DIA 20-180 MM


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TL 25 Y


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03967 · CNC Turning- and Milling Center

          CMZ - TL 25 Y - - 2012 - FANUC 31 A

          Technical details
          turning diameter 510 mm︱turning length 676 mm︱control FANUC 31 A ︱turning speeds 670 U/min︱rapid traverse 24 m/min︱workpiece weight 600 kg︱thread pitch max. 400 mm︱total power requirement 30 kW︱weight of the machine ca. 5.8 t︱dimensions of the machine ca. m︱
          4 AXIS CNC LATHE WHIT Y AXIS LIVE TOOLS 1 disc turret with 12 position, , cylinder shaft, 1 tailstock, , hydr. clamping CONTROL FANUC 31I A
            turning diameter 510 mm
            turning length 676 mm
            control FANUC 31 A
            turning speeds 670 U/min
            rapid traverse 24 m/min
            workpiece weight 600 kg
            thread pitch max. 400 mm
            total power requirement 30 kW
            weight of the machine ca. 5.8 t
            Description :
            4 AXIS CNC LATHE WHIT Y AXIS LIVE TOOLS

            1 disc turret with 12 position, , cylinder shaft, 1 tailstock, , hydr. clamping
            CONTROL FANUC 31I A


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAZAK Quick Turn Smart 350


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03948 · CNC Turning- and Milling Center

          MAZAK - Quick Turn Smart 350 - - 2012 - MAZATROL SMART Dialog

          Technical details
          turning diameter 420 mm︱turning length 1280 mm︱control MAZATROL SMART Dialog︱swing dia. 720 mm︱rapid power traverse in X-and Z direction 20 m/min︱chucking diameter 250 mm︱bar material dia. 102 mm︱spindle drive 30 kW︱spindle speed: 3300 ︱spindle nose JIS A2-8 ︱tailstock quill taper MT MK5 ︱tailstock quill stroke 110 mm︱tailstock quill diameter 100 mm︱Tailstock Travel 1300 mm︱bearing for center in tailstock spindle ︱total power requirement 50 kVA︱weight of the machine ca. 7 t︱dimensions of the machine ca. 4,5x1,7 m︱manual tool eye
          Machine IN GOOD CONDITION SOME tool holDER INCLUD WITH STEADY AND CHIP CONVOYER
            turning diameter 420 mm
            turning length 1280 mm
            control MAZATROL SMART Dialog
            swing dia. 720 mm
            rapid power traverse in X-and Z . 20 m/min
            chucking diameter 250 mm
            bar material dia. 102 mm
            spindle drive 30 kW
            spindle speed: 3300
            spindle nose JIS A2-8
            tailstock quill taper MT MK5
            tailstock quill stroke 110 mm
            tailstock quill diameter 100 mm
            Tailstock Travel 1300 mm
            total power requirement 50 kVA
            weight of the machine ca. 7 t
            dimensions of the machine ca. 4,5x1,7 m
            Description :
            Machine IN GOOD CONDITION
            SOME tool holDER INCLUD
            WITH STEADY
            AND CHIP CONVOYER


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI NTX1000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17959 · CNC Turning- and Milling Center

          MORI SEIKI - NTX1000 - - 2012 - MSX-711-IV Mori Seiki

          Technical details
          turning diameter 370 mm︱turning length 424 mm︱control MSX-711-IV Mori Seiki︱swing diameter 370 mm︱X1- Axis 380 mm︱X2- Axis 155 mm︱Z1- Axis 460+155 mm︱Z2- Axis 610 mm︱y-axis +/- 105 mm︱B - axis +/- 120 °︱bar material dia. 65 mm︱speed spindle max. S1 5.000 / S2 6.000 U/min.︱spindle bore S1/S2 65/38 mm︱ 12000 1/min︱tool taper Capto C5 ︱toolpiece magazine: chain magazine 76 Stück︱tool turret with 10 work positions ︱total power requirement 45 kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. 2,71 x 2,43 x 2,40 m︱
          MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000
            turning diameter 370 mm
            turning length 424 mm
            control MSX-711-IV Mori Seiki
            swing diameter 370 mm
            X1- Axis 380 mm
            X2- Axis 155 mm
            Z1- Axis 460+155 mm
            Z2- Axis 610 mm
            y-axis +/- 105 mm
            B - axis +/- 120 °
            bar material dia. 65 mm
            speed spindle max. S1 5.000 / S2 6.000 U/min.
            spindle bore S1/S2 65/38 mm
            12000 1/min
            tool taper Capto C5
            toolpiece magazine: chain magazi. 76 Stück
            total power requirement 45 kW
            weight of the machine ca. 10,5 t
            dimensions of the machine ca. 2,71 x 2,43 x 2,40 m
            Description :
            MAPPS control system
            Renishaw HPRA (manual tool presetter)
            Blum Laser Control
            Direct measuring system X;Y;Z;B
            Collet chuck SMW Autoblok KSZ-MB-040-Z140
            Workpiece conveyor belt
            Bar feeder Breuning Irco ILS-RBK-10012
            Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar
            Chip conveyor ConSep 2000


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX Beta 800


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2323 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX Beta 800 - - 2012 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 800 mm︱control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. 6130 kg︱dimensions of the machine ca. m︱
          CNC turning and milling center in good condition with driven tools, C and Y axis, subspindle and CNC control Siemens 840 D. Operating hours according to the attached photo from February 8, 2024 The hours may increase as the machine is currently still in use. Max. workpiece diameter 410 mm Max. workpiece length 800 mm Max. travel X-axis 300 mm Max. travel Y-axis +/- 50 mm Max. travel Z-axis 850 mm Turning diameter over cross slide 250 mm Main spindle drive power 65 kW Spindle bore 75 mm Spindle speed of the main spindle 4000 rpm. Spindle speed of the counter spindle 5000 rpm. Equipment and accessories: Chip conveyor Coolant system with paper belt filter Oil mist extraction system Electrical control cabinet with air conditioning (tropical package) 3-jaw power chuck on main and subspindle Basic equipment of tool holders Documentation/Manual
            turning diameter 250 mm
            turning length 800 mm
            control Siemens 840 D
            weight of the machine ca. 6130 kg
            Description :
            CNC turning and milling center in good condition with driven tools,
            C and Y axis, subspindle and CNC control Siemens 840 D.

            Operating hours according to the attached photo from February 8, 2024
            The hours may increase as the machine is currently still
            in use.

            Max. workpiece diameter 410 mm
            Max. workpiece length 800 mm
            Max. travel X-axis 300 mm
            Max. travel Y-axis +/- 50 mm
            Max. travel Z-axis 850 mm
            Turning diameter over cross slide 250 mm
            Main spindle drive power 65 kW
            Spindle bore 75 mm
            Spindle speed of the main spindle 4000 rpm.
            Spindle speed of the counter spindle 5000 rpm.

            Equipment and accessories:
            Chip conveyor
            Coolant system with paper belt filter
            Oil mist extraction system
            Electrical control cabinet with air conditioning (tropical package)
            3-jaw power chuck on main and subspindle
            Basic equipment of tool holders
            Documentation/Manual


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center YCM GT 300 MB


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-5000 · CNC Turning- and Milling Center

          YCM - GT 300 MB - - 2011/08 - FANUC TXP-200 FA

          Technical details
          control FANUC TXP-200 FA ︱turning diameter 360 mm︱swing over bed 600 mm︱swing diameter over bed slide 450 mm︱turning length 683 mm︱c-axis ︱indexing 0.001 °︱turning speeds -3000 U/min︱tool taper VDI 40 ︱Top turret tool hodler: 12 ︱tailstock quill taper MT 5 ︱quill travel 100 mm︱feed 1-10 m/min︱rapid traverse X-axis 20 m/min︱rapid traverse Z-axis 24 m/min︱Overall size 4450x2100x2350 mm︱weight of the machine ca. 7200 t︱
            control FANUC TXP-200 FA
            turning diameter 360 mm
            swing over bed 600 mm
            swing diameter over bed slide 450 mm
            turning length 683 mm
            indexing 0.001 °
            turning speeds -3000 U/min
            tool taper VDI 40
            Top turret tool hodler: 12
            tailstock quill taper MT 5
            quill travel 100 mm
            feed 1-10 m/min
            rapid traverse X-axis 20 m/min
            rapid traverse Z-axis 24 m/min
            Overall size 4450x2100x2350 mm
            weight of the machine ca. 7200 t


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center BENZINGER DoLittle B3


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02910 · CNC Turning- and Milling Center

          BENZINGER - DoLittle B3 - - 2011 - Sinumerik 828 D

          Technical details
          turning diameter 16 mm︱turning length 145 mm︱control Sinumerik 828 D ︱number of spindle speeds 15000 ︱gripping station 16 ︱spindle speed: 15000 ︱load magazine ILS-MUK Breuninger Irco︱high-pressure pump Knoll ︱total power requirement 15 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 2.1 x 1.1 x 1.9 +Irco ILS mm︱
          Turn-mill centre for maximum precision Benzinger DoLittle B3, built in 2011 - Dolittle B3 main and counter spindle with linear tool structure Tool stations: Main spindle 10 tools + 1 stop (2 blocks 5 tools each + 1 stop) Counter spindle 11 tools (2 blocks of 5 and 6 tools) Driven tools via the swivelling axis 6 tools There are 10 tool blocks in total. Technical data - Traverse path X1 axis 320mm - Traverse path Z1 axis 145mm - Traverse path Z2 axis 90mm - Traverse path Y-axis 80mm - 2x C-axis - Rapid traverse speeds X/Y/Z 30 m/min - Water-cooled motor spindle 16 mm, 15,000 1/min - BENZINGER linear tool carrier system - Swivelling NC axis with 6 driven tools Accessories: Knoll high-pressure pump Hydra cooling system Suction channel Tool holder, collets 10 tool blocks
            turning diameter 16 mm
            turning length 145 mm
            control Sinumerik 828 D
            number of spindle speeds 15000
            gripping station 16
            spindle speed: 15000
            load magazine ILS-MUK Breuninger Irco
            high-pressure pump Knoll
            total power requirement 15 kW
            weight of the machine ca. 2,6 t
            dimensions of the machine ca. 2.1 x 1.1 x 1.9 +Irco ILS mm
            Description :
            Turn-mill centre for maximum precision Benzinger DoLittle B3, built in 2011

            - Dolittle B3 main and counter spindle with linear tool structure

            Tool stations:
            Main spindle 10 tools + 1 stop (2 blocks 5 tools each + 1 stop)
            Counter spindle 11 tools (2 blocks of 5 and 6 tools)
            Driven tools via the swivelling axis 6 tools

            There are 10 tool blocks in total.

            Technical data
            - Traverse path X1 axis 320mm
            - Traverse path Z1 axis 145mm
            - Traverse path Z2 axis 90mm
            - Traverse path Y-axis 80mm
            - 2x C-axis
            - Rapid traverse speeds X/Y/Z 30 m/min
            - Water-cooled motor spindle 16 mm, 15,000 1/min
            - BENZINGER linear tool carrier system
            - Swivelling NC axis with 6 driven tools

            Accessories:
            Knoll high-pressure pump
            Hydra cooling system
            Suction channel
            Tool holder, collets
            10 tool blocks



        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX G400 S-1/300


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1044 · CNC Turning- and Milling Center

          INDEX - G400 S-1/300 - - 2011 - INDEX - C200-4D

          Technical details
          work travel X:320 & Z:1250 mm︱rapid traverse X:20 & Z:40 m/min︱control INDEX - C200-4D ︱--- MOTOR MILLING SPINDLE --- ------------------------- ︱tool taper HSK A63 ︱turning speeds 12000 U/min︱Power 27,5 KW︱front bearing 80 mm︱turning speeds 3000 U/min︱MAIN SPINDLE D102 direct drive ------------------------- ︱spindle diameter in front bearing 1200 mm︱spindle passage 102 mm︱forward bearing diameter 170 mm︱
          CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300
            work travel X:320 & Z:1250 mm
            rapid traverse X:20 & Z:40 m/min
            control INDEX - C200-4D
            --- MOTOR MILLING SPINDLE --- -------------------------
            tool taper HSK A63
            turning speeds 12000 U/min
            Power 27,5 KW
            front bearing 80 mm
            turning speeds 3000 U/min
            MAIN SPINDLE D102 direct drive -------------------------
            spindle diameter in front bearin. 1200 mm
            spindle passage 102 mm
            forward bearing diameter 170 mm
            Description :
            CNC Turning- and Milling Center | INDEX - G400 S-1/300

            The machine is in a very good condition
            with only 2500 H main working hours.

            + MARPOSS probe

            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: G400 | G 400 | G400 S1 300 | G400S1 300


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI NLX 2500 SY / 1250


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9064 · CNC Turning- and Milling Center

          MORI SEIKI - NLX 2500 SY / 1250 - - 2011 - M 730 BM MAPPS IV

          Technical details
          turning diameter max. 356 mm︱turning length 1.255 mm︱control M 730 BM MAPPS IV︱greates pass round over bed 920 mm︱Swing dia. over traverse guideway 742 mm︱distance between spindles 1.511 mm︱Main spindle: ︱turning speed range - main spindle 4.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱spindle nose JIS A-8 ︱spindle bore 91 mm︱max. bar capacity 80 mm︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱spindle bore 43 mm︱axis stroke: ︱x-travel 260 mm︱z-travel 1.345 mm︱Y - Axis +/-50 mm︱
          CNC - Turning- and MillingCenter DMG MORI SEIKI - NLX 2500 SY / 1250 - Subspindle - only 9.600 Spindle hours (May 2023)
            turning diameter max. 356 mm
            turning length 1.255 mm
            control M 730 BM MAPPS IV
            greates pass round over bed 920 mm
            Swing dia. over traverse guidewa. 742 mm
            distance between spindles 1.511 mm
            turning speed range - main spind. 4.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            spindle nose JIS A-8
            spindle bore 91 mm
            max. bar capacity 80 mm
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            spindle bore 43 mm
            x-travel 260 mm
            z-travel 1.345 mm
            Y - Axis +/-50 mm
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI SEIKI - NLX 2500 SY / 1250

            - Subspindle
            - only 9.600 Spindle hours (May 2023)



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

          TOP Manufacturer:

          PITTLER -