,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Bench Lathe

          Machinelist: Bench Lathe


          Bench Lathe

          used Lathes Bench Lathe KAMI DKM 250V.550


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78007 · Bench Lathe

          KAMI - DKM 250V.550 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 20 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 60 mm︱metric threading 0,4 - 3,0 mm︱thread - inch 10 - 44 TPI︱thread - module 0,2 - 12,5 mm︱connected load frequency 230 V︱total power requirement 1,0 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,09 x 0,59 x 0,45 m︱
          Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 20 mm
            tailstock quill taper MT 2
            tailstock quill stroke 60 mm
            metric threading 0,4 - 3,0 mm
            thread - inch 10 - 44 TPI
            thread - module 0,2 - 12,5 mm
            connected load frequency 230 V
            total power requirement 1,0 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,09 x 0,59 x 0,45 m
            Description :
            Equipped with
            - 20 mm spindle passage
            - adjustable guideways
            - Powerful 1.0 kW motor
            - continuously variable speed
            Scope of delivery:
            - 3-jaw chuck 100 mm,
            - 4-jaw faceplate chuck 125mm
            - standing and rotating bezel
            - Splash guard
            - Feed protection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Norton Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78003 · Bench Lathe

          HBM - 250 x 550 Norton Profi - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱
          Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 125 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 1,25 x 0,6 x 0,6 m
            Description :
            Speed in 6 levels 125 - 2000rpm.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm. (Independent)
            Fixed bezel.
            Revolving bezel.
            4-fold steel holder.
            chip tray.
            back panel.
            spindle protection.
            Hardened bed rails.
            Longitudinal feed with left / right switching.
            Set of change gears.
            Associated Tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn Vario mit MFB Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78005 · Bench Lathe

          ELMAG - Superturn Vario mit MFB Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱bore capacity in steel 16 mm︱throat 169 mm︱quill stroke 50 mm︱turning speed range - drilling 50 - 2250 U/min︱spindle drive 0,5 kW︱total power requirement 0,75 kW︱weight of the machine ca. 0,175 t︱dimensions of the machine ca. 1,3 x 0,65 x 1,3 m︱
          3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            bore capacity in steel 16 mm
            throat 169 mm
            quill stroke 50 mm
            turning speed range - drilling 50 - 2250 U/min
            spindle drive 0,5 kW
            total power requirement 0,75 kW
            weight of the machine ca. 0,175 t
            dimensions of the machine ca. 1,3 x 0,65 x 1,3 m
            Description :
            3-axis LCD digital display system
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78001 · Bench Lathe

          KAMI - DKM 250L - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 27 mm spindle clearance
            - adjustable guideways
            - Powerful motor with 0.75 kW
            - High resolution of the axis spindles for exact positioning
            - Danger!! without digital display
            Scope of delivery:
            3-jaw chuck 100 mm, change gear set, splash guard.

            On request also with 230 volt connection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Profi Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78002 · Bench Lathe

          HBM - 250 x 550 Profi Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱
          Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,3 x 0,6 x 0,65 m
            Description :
            Benchtop lathe with base cabinet
            3-axis LCD digital display system fully assembled.
            Longitudinal feed.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm.
            Clamping plate.
            4-way steel holder.
            Clock for thread cutting.
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Forage protection
            Set of wheels.
            Appropriate tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L-1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78000 · Bench Lathe

          KAMI - DKM 250L-1 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 2-axis digital measuring system with position indicator
            - manufactured according to DIN 8606
            - 27 mm spindle passage
            - adjustable guideways "by adjustable strips"
            - Strong engine with 0.75 kW
            - High resolution of the axis spindles for exact positioning

            Delivery:
            3-jaw chuck 100 mm, change gear set, splash guard 3-axis
            digital measuring system fully assembled.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn 250 x 550 Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78004 · Bench Lathe

          ELMAG - Superturn 250 x 550 Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,3 x 0,65 x 0,6 m︱
          longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,3 x 0,65 x 0,6 m
            Description :
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 290 x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78006 · Bench Lathe

          HBM - 290 x 750 - - -neu- -

          Technical details
          turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱
          2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.
            turning diameter over bed 290 mm
            turning diameter over slide rest 170 mm
            turning length 750 mm
            turning speeds 75 - 2000 U/min
            centre height 145 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            tailstock quill stroke 80 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,34 t
            dimensions of the machine ca. 1,3 x 0,75 x 0,7 m
            Description :
            2-axis LCD digital display system (now new).
            Longitudinal and transverse feed.
            3-jaw chuck 160 mm.
            4-jaw chuck 160 mm.
            faceplate
            4-way steel holder with 4 pcs tool holders
            2 pcs. bezels
            Machine light
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Feed protection
            Set of wheels.
            Machine tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe SCHAUBLIN 102 N


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4180 · Bench Lathe

          SCHAUBLIN - 102 N - - -

          Technical details
          centre height 102 mm︱Distance between centres 450 mm︱turning dia. over face-slide 120 mm︱turning diameter over bed 200 mm︱spindle taper: W20 ︱spindle bore 22 mm︱number of spindle speeds 18 ︱from/to 45-2500 U/min︱tailstock quill taper MT 2 ︱diameter of quill 30 mm︱quill stroke 110 mm︱dimensions of the machine ca. 1500x800x1400 mmxmmxmm︱weight 380 kg︱accessories and equipment: ︱3-jaw-chuck diameter 100 mm︱quick change tool holder: ︱make MULTIFIX ︱boring chuck 1 ︱misc. accessories
            centre height 102 mm
            Distance between centres 450 mm
            turning dia. over face-slide 120 mm
            turning diameter over bed 200 mm
            spindle taper: W20
            spindle bore 22 mm
            number of spindle speeds 18
            from/to 45-2500 U/min
            tailstock quill taper MT 2
            diameter of quill 30 mm
            quill stroke 110 mm
            dimensions of the machine ca. 1500x800x1400 mmxmmxmm
            weight 380 kg
            3-jaw-chuck diameter 100 mm
            make MULTIFIX
            boring chuck 1


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center CMZ TA 30 Y


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03927 · CNC Turning- and Milling Center

          CMZ - TA 30 Y - - 2019 - fanuc 32 i

          Technical details
          turning diameter 460 mm︱turning length 750 mm︱control fanuc 32 i ︱swing dia. 760 mm︱rapid power traverse in X-and Z direction 18/24 m/min︱chucking diameter 250 mm︱bar material dia. 66 mm︱spindle drive 42 kW︱spindle speed: 3500 ︱max. torque on the spindle 730 ︱spindle nose ASA 8" A2 ︱turret stations / rotary tool stations 12/12 ︱RPM of rotary tools 80-4000 1/min︱tailstock quill taper MT MK4 ︱tailstock quill stroke 100 mm︱tailstock quill diameter 110 mm︱Tailstock Travel 990 mm︱bearing for center in tailstock spindle ︱total power requirement 70 kVA︱weight of the machine ca. 6.1 t︱
          VERY NICE MACHINE ONLY 1900 SPINDEL HOURS SPINDEL BORE DIA 66 MM TURNING LENG 66 MM C AXIS MOWING TOOLS Y AXIS +40/-40MM FANUC 32 I CHIP CONVOYER
            turning diameter 460 mm
            turning length 750 mm
            control fanuc 32 i
            swing dia. 760 mm
            rapid power traverse in X-and Z . 18/24 m/min
            chucking diameter 250 mm
            bar material dia. 66 mm
            spindle drive 42 kW
            spindle speed: 3500
            max. torque on the spindle 730
            spindle nose ASA 8" A2
            turret stations / rotary tool st. 12/12
            RPM of rotary tools 80-4000 1/min
            tailstock quill taper MT MK4
            tailstock quill stroke 100 mm
            tailstock quill diameter 110 mm
            Tailstock Travel 990 mm
            total power requirement 70 kVA
            weight of the machine ca. 6.1 t
            Description :
            VERY NICE MACHINE ONLY 1900 SPINDEL HOURS
            SPINDEL BORE DIA 66 MM
            TURNING LENG 66 MM
            C AXIS MOWING TOOLS
            Y AXIS +40/-40MM
            FANUC 32 I
            CHIP CONVOYER



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TA 15  15 YS 640


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03820 · CNC Turning- and Milling Center

          CMZ - TA 15 15 YS 640 - - 2019 - FANUC 32 ITB

          Technical details
          turning diameter 400 mm︱turning length 640 mm︱control FANUC 32 ITB ︱bar diameter 52 mm︱travel -x axis 310 mm︱travel -z axis 640 mm︱turning speed range - drive spindle 4500 1/min︱spindle nose JIS A2-6 ︱spindle bore 61 mm︱C-Axis 0,001° ︱spindle bearing diameter 100 mm︱turret head 12 Pos. ︱tool changing time 0,2 sec︱rapid traverse X-axis 30 m/min︱rapid traverse Z-axis 30 m/min︱drive capacity - spindle motor 15/11 kW︱total power requirement 35 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 2,7 x 2,2 x 1,9 m︱
          VERY NICE MACHINE WITH FANUC 32 IT CHIP CONVOYOR SUP SPINDEL BAR FEEDER C AXIS AND Y AXIS + LIVE TOOLS
            turning diameter 400 mm
            turning length 640 mm
            control FANUC 32 ITB
            bar diameter 52 mm
            travel -x axis 310 mm
            travel -z axis 640 mm
            turning speed range - drive spin. 4500 1/min
            spindle nose JIS A2-6
            spindle bore 61 mm
            C-Axis 0,001°
            spindle bearing diameter 100 mm
            turret head 12 Pos.
            tool changing time 0,2 sec
            rapid traverse X-axis 30 m/min
            rapid traverse Z-axis 30 m/min
            drive capacity - spindle motor 15/11 kW
            total power requirement 35 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 2,7 x 2,2 x 1,9 m
            Description :
            VERY NICE MACHINE WITH FANUC 32 IT
            CHIP CONVOYOR
            SUP SPINDEL
            BAR FEEDER
            C AXIS AND Y AXIS + LIVE TOOLS


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI CTX alpha 500


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9173 · CNC Turning- and Milling Center

          DMG MORI - CTX alpha 500 - - 2018 - Sinumerik 840 D sl Celos

          Technical details
          turning diameter 240 mm︱turning length 500 mm︱control Sinumerik 840 D sl Celos︱swing diameter max. 510 mm︱Main spindle: ︱turning speed range - main spindle max. 5.500 min/-1︱power capacity - main spindel 14 / 13 kW︱max. Torque 192 / 172 Nm︱inner draw tube diameter 66 mm︱C-Axis 0,001 °︱spindle diameter in front bearing 100 mm︱max. chucking diameter 215 mm︱spindle nose 140H5 ︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱tool taper VDI 30 ︱Spindle speed - driven tool stations max. 5.000 min -1︱power capacity - driven tool-stations 5,4 kW︱max. Torque 18 Nm︱
          CNC - Turning- and MillingCenter DMG GILDEMEISTER - CTX alpha 500 - Very good condition - only 4.400 spindle hours - incl. extensive tool package
            turning diameter 240 mm
            turning length 500 mm
            control Sinumerik 840 D sl Celos
            swing diameter max. 510 mm
            turning speed range - main spind. max. 5.500 min/-1
            power capacity - main spindel 14 / 13 kW
            max. Torque 192 / 172 Nm
            inner draw tube diameter 66 mm
            C-Axis 0,001 °
            spindle diameter in front bearin. 100 mm
            max. chucking diameter 215 mm
            spindle nose 140H5
            number of toolpositions 12 pos.
            Number of driven toolspositions 12 pos.
            tool taper VDI 30
            Spindle speed - driven tool stat. max. 5.000 min -1
            power capacity - driven tool-sta. 5,4 kW
            max. Torque 18 Nm
            Description :
            CNC - Turning- and MillingCenter
            DMG GILDEMEISTER - CTX alpha 500

            - Very good condition
            - only 4.400 spindle hours

            - incl. extensive tool package


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center TAKISAWA LA 250 YS


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03991 · CNC Turning- and Milling Center

          TAKISAWA - LA 250 YS - - 2017 - FANUC 31 ITB

          Technical details
          turning diameter 370 mm︱turning length 737 mm︱control FANUC 31 ITB ︱max. bar capacity 75 mm︱travel -y axis +50, -50 mm︱max. speed main spindle 3500 min-1︱spindle taper 1 A2-6 ︱C - Axis JA ︱no. of tools in turret 1 12 ︱drive capacity - spindle motor 26 kW︱power capacity - driven tools 6.7 kW︱total power requirement 40 kVA︱weight of the machine ca. 7 t︱dimensions of the machine ca. 53.5 X 2.1 X 2 m︱Chip conveyor ja / yes
          High Performance CNC Turning- and Milling Center with Y - Axis Chipconveyer, Counterspindle, driven tools, Y - Axis for eccentric Drilling and Milling works + - 60 mm C-Axis, screw brake, partcatcher, 3 driven tools as accessories, 10 static holder as accessories, , Toolsystem with one collet each for Main - and Subspindle, Tool Eye Measurement, Part catcher and part conveyer WHITOUT BAR LODER
            turning diameter 370 mm
            turning length 737 mm
            control FANUC 31 ITB
            max. bar capacity 75 mm
            travel -y axis +50, -50 mm
            max. speed main spindle 3500 min-1
            spindle taper 1 A2-6
            C - Axis JA
            no. of tools in turret 1 12
            drive capacity - spindle motor 26 kW
            power capacity - driven tools 6.7 kW
            total power requirement 40 kVA
            weight of the machine ca. 7 t
            dimensions of the machine ca. 53.5 X 2.1 X 2 m
            Chip conveyor ja / yes
            Description :
            High Performance CNC Turning- and Milling Center with Y - Axis
            Chipconveyer, Counterspindle, driven tools,
            Y - Axis for eccentric Drilling and Milling works + - 60 mm
            C-Axis, screw brake, partcatcher, 3 driven tools as accessories, 10 static
            holder as accessories, , Toolsystem with one collet each for
            Main - and Subspindle, Tool Eye Measurement, Part catcher and part conveyer
            WHITOUT BAR LODER


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI CTX beta 800


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-033890 · CNC Turning- and Milling Center

          DMG MORI - CTX beta 800 - - 2017 - Sinumerik 840D sl Siemens

          Technical details
          turning diameter max. 410 mm︱turning length 800 mm︱control Sinumerik 840D sl Siemens︱greates pass round over bed 700 mm︱Main spindle: ︱turning speed range - main spindle 20 - 5.000 min/-1︱power capacity - main spindel 34 / 25 kW︱max. Torque 580 Nm︱C-Axis 360 °︱spindle nose 220h5 ︱chucking diameter 250 mm︱max. bar capacity 76 mm︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱power capacity driven tool-stations 14,2 kW︱Spindle speed - driven tool stations 40 - 10.000 min -1︱tool taper VDI 40 DIN69880︱max. Torque 34 Nm︱axis stroke:
          CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 - Sinumerik Operate und ShopTurn 3G - Spindle ISM 76 - Y-Axis - WITH Tools + SUP SPINDEL
            turning diameter max. 410 mm
            turning length 800 mm
            control Sinumerik 840D sl Siemens
            greates pass round over bed 700 mm
            turning speed range - main spind. 20 - 5.000 min/-1
            power capacity - main spindel 34 / 25 kW
            max. Torque 580 Nm
            C-Axis 360 °
            spindle nose 220h5
            chucking diameter 250 mm
            max. bar capacity 76 mm
            number of toolpositions 12 pos.
            Number of driven toolspositions 12 pos.
            power capacity driven tool-stati. 14,2 kW
            Spindle speed - driven tool stat. 40 - 10.000 min -1
            tool taper VDI 40 DIN69880
            max. Torque 34 Nm
            Description :
            CNC - Turning- and Millingcenter
            DMG MORI - CTX beta 800

            - Sinumerik Operate und ShopTurn 3G
            - Spindle ISM 76
            - Y-Axis
            - WITH Tools
            + SUP SPINDEL



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NLX 2000 Y / 500


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9155 · CNC Turning- and Milling Center

          DMG MORI - NLX 2000 Y / 500 - - 2016 - ErgoLine CELOS

          Technical details
          turning diameter max. 366 mm︱turning length 510 mm︱control ErgoLine CELOS︱greates pass round over bed 923,8 mm︱Swing dia. over traverse guideway 755 mm︱standard turning dia. 275 mm︱distance between spindles 500 mm︱Main spindle: ︱turning speed range - main spindle 5.000 min/-1︱power capacity - main spindel 15 / 11 kW︱spindle nose JIS A-6 ︱spindle bearing diameter 120 mm︱spindle bore 73 mm︱max. usable bar diameter 65 mm︱C-Axis 0,001 °︱chucking diameter ( - ) mm︱axis stroke: ︱x-travel 260 mm︱z-travel 590 mm︱Y - Axis (100) +/-50 mm︱
          CNC - Turning- and MillingCenter DMG MORI - NLX 2000 Y / 500 - C-Axis - Y-Axis - Tool-Drive - WITHOUT Toolholders!
            turning diameter max. 366 mm
            turning length 510 mm
            control ErgoLine CELOS
            greates pass round over bed 923,8 mm
            Swing dia. over traverse guidewa. 755 mm
            standard turning dia. 275 mm
            distance between spindles 500 mm
            turning speed range - main spind. 5.000 min/-1
            power capacity - main spindel 15 / 11 kW
            spindle nose JIS A-6
            spindle bearing diameter 120 mm
            spindle bore 73 mm
            max. usable bar diameter 65 mm
            C-Axis 0,001 °
            chucking diameter ( - ) mm
            x-travel 260 mm
            z-travel 590 mm
            Y - Axis (100) +/-50 mm
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI - NLX 2000 Y / 500

            - C-Axis
            - Y-Axis
            - Tool-Drive
            - WITHOUT Toolholders!


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI SEIKI NT 6600 DCG / 3000 BS


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9119 · CNC Turning- and Milling Center

          DMG MORI SEIKI - NT 6600 DCG / 3000 BS - - 2015 - Fanuc 31iB5 MAPPS

          Technical details
          turning diameter max. 1.070 mm︱turning length max. 3.076 mm︱control Fanuc 31iB5 MAPPS︱max. swing diameter 1.070 mm︱Max. distance between centres 3.510 mm︱axis stroke: ︱x-axis 1.040 (1.000 + 40) mm︱y-axis +/- 330 mm︱z-axis 3.150 mm︱b-axis +/- 120 °︱z-axis 2: max. 2.440 mm︱Main spindle: ︱max. spindle speed 1.500 min/-1︱Number of speed ranges 2 ︱power capacity - main spindel 30 / 26 kW︱max. Torque 3.254 Nm︱spindle bearing diameter 260 mm︱spindle bore 185 mm︱max. usable bar diameter 164 mm︱C-Axis 0,0001 °︱
          CNC-HighPerformance-Turning- and Millingcenter DMG MORI SEIKI - NT 6600 DCG / 3000 BS - Main- and Subspindle - Tool-Spindle - 2x Three-Jaw-Chuck "SCHUNK - ROTA THW 500-128" - 1x Steady-Rest "SMW AutoBLOK - SLU 6ZS 125-460"mm - Operating-Hours: Power-On: ca. 23.000h Operating: ca. 6.400h Cutting: ca. 5.000h
            turning diameter max. 1.070 mm
            turning length max. 3.076 mm
            control Fanuc 31iB5 MAPPS
            max. swing diameter 1.070 mm
            Max. distance between centres 3.510 mm
            x-axis 1.040 (1.000 + 40) mm
            y-axis +/- 330 mm
            z-axis 3.150 mm
            b-axis +/- 120 °
            z-axis 2: max. 2.440 mm
            max. spindle speed 1.500 min/-1
            Number of speed ranges 2
            power capacity - main spindel 30 / 26 kW
            max. Torque 3.254 Nm
            spindle bearing diameter 260 mm
            spindle bore 185 mm
            max. usable bar diameter 164 mm
            C-Axis 0,0001 °
            Description :
            CNC-HighPerformance-Turning- and Millingcenter
            DMG MORI SEIKI - NT 6600 DCG / 3000 BS

            - Main- and Subspindle
            - Tool-Spindle
            - 2x Three-Jaw-Chuck "SCHUNK - ROTA THW 500-128"
            - 1x Steady-Rest "SMW AutoBLOK - SLU 6ZS 125-460"mm

            - Operating-Hours:
            Power-On: ca. 23.000h
            Operating: ca. 6.400h
            Cutting: ca. 5.000h


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX beta 500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03812 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX beta 500 - - 2014 - 840 D SL SIEMENS

          Technical details
          turning diameter 410 mm︱turning length 850 mm︱control 840 D SL SIEMENS︱greates pass round over bed 500 mm︱Main spindle: ︱turning speed range - main spindle 25 - 5.000 min/-1︱power capacity - main spindel 25 / 34 kW︱max. Torque 280 Nm︱C-Axis 0,01 °︱spindle nose 170 h5 ︱max. chucking diameter 210 mm︱chucking diameter 250 mm︱spindle diameter in front bearing 130 mm︱spindle bore 87 mm︱max. bar capacity 77 mm︱turret: ︱number of toolpositions 16 pos.︱Number of driven toolspositions 16 pos.︱power capacity driven tool-stations 11,3 kW︱Spindle speed - driven tool stations max. 4.000 min -1︱
          CNC - Turning- and Millingcenter GILDEMEISTER - CTX beta 500 - Operating-Hours: Spindle-Runtime: ca.100h NEW SPINDEL -INTER FACE FOR Bar-Feede - C-Axis - Y-Axis CHIP CONVOYER CHUCK DIA 210 MM
            turning diameter 410 mm
            turning length 850 mm
            control 840 D SL SIEMENS
            greates pass round over bed 500 mm
            turning speed range - main spind. 25 - 5.000 min/-1
            power capacity - main spindel 25 / 34 kW
            max. Torque 280 Nm
            C-Axis 0,01 °
            spindle nose 170 h5
            max. chucking diameter 210 mm
            chucking diameter 250 mm
            spindle diameter in front bearin. 130 mm
            spindle bore 87 mm
            max. bar capacity 77 mm
            number of toolpositions 16 pos.
            Number of driven toolspositions 16 pos.
            power capacity driven tool-stati. 11,3 kW
            Spindle speed - driven tool stat. max. 4.000 min -1
            Description :
            CNC - Turning- and Millingcenter
            GILDEMEISTER - CTX beta 500

            - Operating-Hours: Spindle-Runtime: ca.100h NEW SPINDEL
            -INTER FACE FOR Bar-Feede
            - C-Axis
            - Y-Axis
            CHIP CONVOYER
            CHUCK DIA 210 MM





        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG-GILDEMEISTER CTX beta 1250 TC


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03915 · CNC Turning- and Milling Center

          DMG-GILDEMEISTER - CTX beta 1250 TC - - 2014 - SIEMENS 840

          Technical details
          turning diameter 390 mm︱turning length 1250 mm︱control SIEMENS 840︱total power requirement kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. m︱
            turning diameter 390 mm
            turning length 1250 mm
            control SIEMENS 840
            weight of the machine ca. 11 t


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX IT 600


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02959 · CNC Turning- and Milling Center

          INDEX - IT 600 - - 2014 - Fanuc 32i-B

          Technical details
          turning diameter 65 mm︱turning length 150 mm︱control Fanuc 32i-B ︱Number of working hours 11028 h︱chuck diameter 250 mm︱turning speeds 4000 U/min︱turret (x-stations) 14 VDI 30︱Number of axles 3 (X-Y-Z) St.︱turret (x-stations) 7 VDI 30︱Number of axles 2 (X-Z) St.︱c-axis 0,001 °︱y-Axis min./max. +/-75 mm︱chip conveyor Knoll 400 S-1/335 Bj. 2013︱total power requirement 18,5 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 4,7 x 1,72 x 2,16 m︱Handling system FMB Unirobot M-10iA 12-7P Bj. 2017︱driven tools 7 Rev.1 Stationen︱
          CNC universal lathe INDEX IT600, year of manufacture 2014 - The following accessories would be supplied: o 2-jaw chuck Schunk ROTA 2B 200 o approx. 40 sets of clamping jaws o Approx. 45 tool holders (1x driven), but without cutting tool holder/ cutting tool o Compact handling system FMB unirobot M-10iA-12-7P o 12x 7 pallets each for various blanks Option: It would be ideal if the buyer could machine forged blanks for us in the future. We cannot define an article list in advance, but the machine utilisation would be approx. 10% of the annual capacity. Previously used for machine loading with forged blanks in the moulds Angle, cross and T-piece. Can also be used for saw cuts. However, this does not require pallets, grippers and clamping devices are available.
            turning diameter 65 mm
            turning length 150 mm
            control Fanuc 32i-B
            Number of working hours 11028 h
            chuck diameter 250 mm
            turning speeds 4000 U/min
            turret (x-stations) 14 VDI 30
            Number of axles 3 (X-Y-Z) St.
            turret (x-stations) 7 VDI 30
            Number of axles 2 (X-Z) St.
            c-axis 0,001 °
            y-Axis min./max. +/-75 mm
            chip conveyor Knoll 400 S-1/335 Bj. 2013
            total power requirement 18,5 kW
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 4,7 x 1,72 x 2,16 m
            Handling system FMB Unirobot M-10iA 12-7P Bj. 2017
            driven tools 7 Rev.1 Stationen
            Description :
            CNC universal lathe INDEX IT600, year of manufacture 2014

            - The following accessories would be supplied:
            o 2-jaw chuck Schunk ROTA 2B 200
            o approx. 40 sets of clamping jaws
            o Approx. 45 tool holders (1x driven), but without cutting tool holder/
            cutting tool
            o Compact handling system FMB unirobot M-10iA-12-7P
            o 12x 7 pallets each for various blanks

            Option:
            It would be ideal if the buyer could machine forged blanks for us in the future.
            We cannot define an article list in advance, but the machine utilisation would
            be approx. 10% of the annual capacity.

            Previously used for machine loading with forged blanks in the moulds
            Angle, cross and T-piece.
            Can also be used for saw cuts. However, this does not require
            pallets, grippers and clamping devices are available.



        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI CTX beta 1250 TC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20063 · CNC Turning- and Milling Center

          DMG MORI - CTX beta 1250 TC - - 2014 - Siemens 840D

          Technical details
          turning diameter 500 mm︱turning length 1200 mm︱control Siemens 840D ︱greates pass round over bed 700 mm︱Main spindle: ︱turning speed range - main spindle 20 - 5000 min/-1︱power capacity - main spindel 25 /34 kW︱C-Axis 0,0001 °︱spindle diameter 67 mm︱milling spindle ︱milling spindle motor 23 / 13 kW︱milling head speed 18000 U/min︱b-axis +/- 120 °︱axis stroke: ︱x-axis 490 mm︱y-axis +/- 100 mm︱z-axis 1300 mm︱feeds: ︱rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min︱feed power 5,6 / 5,6 / 7,4 kN︱
          CNC - Turning and milling center - 5 axes - CNC control Siemens 840D Ergo Line with ShopTurn - C-axis (0,0001°) - Milling head with B-axis - Y-axis - Coolant device/paper belt filter - chip conveyor - Tool changer 24-fold (HSK A63) - Direct measuring system - IKZ 25bar - Tailstock
            turning diameter 500 mm
            turning length 1200 mm
            control Siemens 840D
            greates pass round over bed 700 mm
            turning speed range - main spind. 20 - 5000 min/-1
            power capacity - main spindel 25 /34 kW
            C-Axis 0,0001 °
            spindle diameter 67 mm
            milling spindle motor 23 / 13 kW
            milling head speed 18000 U/min
            b-axis +/- 120 °
            x-axis 490 mm
            y-axis +/- 100 mm
            z-axis 1300 mm
            rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min
            feed power 5,6 / 5,6 / 7,4 kN
            Description :
            CNC - Turning and milling center - 5 axes
            - CNC control Siemens 840D Ergo Line with ShopTurn
            - C-axis (0,0001°)
            - Milling head with B-axis
            - Y-axis
            - Coolant device/paper belt filter
            - chip conveyor
            - Tool changer 24-fold (HSK A63)
            - Direct measuring system
            - IKZ 25bar
            - Tailstock


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NLX 2500 SY / 700


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9153 · CNC Turning- and Milling Center

          DMG MORI - NLX 2500 SY / 700 - - 2014 - M 730 BM MAPPS IV

          Technical details
          turning diameter max. 366 mm︱turning length 705 mm︱control M 730 BM MAPPS IV︱greates pass round over bed 920 mm︱Swing dia. over traverse guideway 742 mm︱Main spindle: ︱turning speed range - main spindle 4.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱spindle nose JIS A-8 ︱spindle bearing diameter 140 mm︱spindle bore 91 mm︱max. usable bar diameter 80 mm︱chucking diameter 250 mm︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱spindle nose JIS A2-5 ︱spindle bearing diameter 85 mm︱spindle bore 43 mm︱max. usable bar diameter ( - ) mm︱
          CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive
            turning diameter max. 366 mm
            turning length 705 mm
            control M 730 BM MAPPS IV
            greates pass round over bed 920 mm
            Swing dia. over traverse guidewa. 742 mm
            turning speed range - main spind. 4.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            spindle nose JIS A-8
            spindle bearing diameter 140 mm
            spindle bore 91 mm
            max. usable bar diameter 80 mm
            chucking diameter 250 mm
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            spindle nose JIS A2-5
            spindle bearing diameter 85 mm
            spindle bore 43 mm
            max. usable bar diameter ( - ) mm
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI - NLX 2500 SY / 700

            - Main- and Subspindle
            - C-Axis
            - Y-Axis
            - Tool-Drive


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center VICTOR V-turn X200


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-V2451 · CNC Turning- and Milling Center

          VICTOR - V-turn X200 - - 2014 - Fanuc Series 31i-A

          Technical details
          Control Fanuc Series 31i-A ︱Turning diameter 540 mm︱Turning length 1000 mm︱Spindle bore diameter 52 mm︱Spindle nose A 2-6 ︱Spindle nose sub spindle ︱Turning speed 4200 1/min︱Turning speed sub spindle 1/min︱Milling head speed 12.000 1/min︱Movement X-axis 600 mm︱Movement Y-axis +/- 80 mm︱Movement Z-axis 1100 mm︱B-Axis travel +110 / -115 °︱C-Axis indexing 360 °︱Tool Taper HSK 63 ︱Tools in tool magazine 40 ︱Length 6000 mm︱Width 2314 mm︱Height 2820 mm︱Weight 12.000 kg︱
            Control Fanuc Series 31i-A
            Turning diameter 540 mm
            Turning length 1000 mm
            Spindle bore diameter 52 mm
            Spindle nose A 2-6
            Turning speed 4200 1/min
            Milling head speed 12.000 1/min
            Movement X-axis 600 mm
            Movement Y-axis +/- 80 mm
            Movement Z-axis 1100 mm
            B-Axis travel +110 / -115 °
            C-Axis indexing 360 °
            Tool Taper HSK 63
            Tools in tool magazine 40
            Length 6000 mm
            Width 2314 mm
            Height 2820 mm
            Weight 12.000 kg
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAZAK Integrex i-100S


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20313 · CNC Turning- and Milling Center

          MAZAK - Integrex i-100S - - 2013 - Mazatrol Matrix 2

          Technical details
          turning diameter 500 mm︱turning length 854 mm︱control Mazatrol Matrix 2 ︱Main Spindle: ︱c-axis 0,0001 °︱chucking diameter 6 "︱spindle motor 11 kW︱spindle turning speed range 6000 U/min︱x-axis 450 mm︱z-axis 904 mm︱y-axis 210 mm︱w-axis 903 mm︱b-axis -30 / +210 °︱bar material dia. 51 mm︱Rapid Travel X / Y / Z-Achse 40 m/min︱2nd Spindle: ︱c-axis 0,0001 °︱power capacity 11 kW︱spindle turning speed range 6000 U/min︱milling spindle
          5-axis simultaneous machining - CNC control Mazatrol Matrix 2 - Main & counter spindle - 6" chuck (B206) - Tool changer (36-fold) HSK - Coolant system - Chip tray
            turning diameter 500 mm
            turning length 854 mm
            control Mazatrol Matrix 2
            c-axis 0,0001 °
            chucking diameter 6 "
            spindle motor 11 kW
            spindle turning speed range 6000 U/min
            x-axis 450 mm
            z-axis 904 mm
            y-axis 210 mm
            w-axis 903 mm
            b-axis -30 / +210 °
            bar material dia. 51 mm
            Rapid Travel X / Y / Z-Achse 40 m/min
            c-axis 0,0001 °
            power capacity 11 kW
            spindle turning speed range 6000 U/min
            Description :
            5-axis simultaneous machining
            - CNC control Mazatrol Matrix 2
            - Main & counter spindle
            - 6" chuck (B206)
            - Tool changer (36-fold) HSK
            - Coolant system
            - Chip tray


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN DAEWOO PUMA TT 1500 Y


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03871 · CNC Turning- and Milling Center

          DOOSAN DAEWOO - PUMA TT 1500 Y - - 2012 - FANUC 18 iTB

          Technical details
          turning diameter 500 mm︱turning length 200 mm︱control FANUC 18 iTB ︱travel -x axis 165 mm︱travel -y axis 100 +/-50 mm︱travel -z axis 470 mm︱rapid travel - longitudinal/face 24 m/min︱rapid motion - y-axis 16 m/min︱c-axis 20 min-¹︱spindle bore diameter 65 mm︱spindle drive 15 kW︱milling spindle motor 5.5 kW︱spindle speed: 5000 min-¹︱Number tool positions lower turret 12 ︱Stations which are driven 2 X 12 ︱total power requirement ca 40 kVA︱weight of the machine ca. 5.500 kg︱dimensions of the machine ca. 3.5 x 1.8 x 2 m︱
          PUMA 2500 LSY - Control Fanuc 18i TB - Spindle bore 65 - SPINDEL 1 COLLET CHUCK - The machine has 470 mm turn length - Bal screw instead of Rack and Pineon 2 X turret WITH 12 POSITION - Swarf conveyor - Interface for bar Feed - Automatic tool measuring - High preassure coolant pump 7 bar IEMCA BAR FEEDER
            turning diameter 500 mm
            turning length 200 mm
            control FANUC 18 iTB
            travel -x axis 165 mm
            travel -y axis 100 +/-50 mm
            travel -z axis 470 mm
            rapid travel - longitudinal/face 24 m/min
            rapid motion - y-axis 16 m/min
            c-axis 20 min-¹
            spindle bore diameter 65 mm
            spindle drive 15 kW
            milling spindle motor 5.5 kW
            spindle speed: 5000 min-¹
            Number tool positions lower turr. 12
            Stations which are driven 2 X 12
            total power requirement ca 40 kVA
            weight of the machine ca. 5.500 kg
            dimensions of the machine ca. 3.5 x 1.8 x 2 m
            Description :
            PUMA 2500 LSY
            - Control Fanuc 18i TB
            - Spindle bore 65
            - SPINDEL 1 COLLET CHUCK
            - The machine has 470 mm turn length
            - Bal screw instead of Rack and Pineon
            2 X turret WITH 12 POSITION
            - Swarf conveyor
            - Interface for bar Feed
            - Automatic tool measuring
            - High preassure coolant pump 7 bar
            IEMCA BAR FEEDER


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

          TOP Manufacturer:

          HBM - KAMI - ELMAG - SCHAUBLIN -