Bench Lathe

Machinelist: Bench Lathe

Bench Lathe

WMT GmbH & Co.KG
Siemensstraße 1
46342 Velen-Ramsdorf
Deutschland

+49 2863 92477-47
+49 2863 92477-50
info@w-m-t.de
www.w-m-t.de

#1108-78007 · Bench Lathe

KAMI - DKM 250V.550 - - -neu- -

Technical details

turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 20 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 60 mm︱metric threading 0,4 - 3,0 mm︱thread - inch 10 - 44 TPI︱thread - module 0,2 - 12,5 mm︱connected load frequency 230 V︱total power requirement 1,0 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,09 x 0,59 x 0,45 m︱

Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection

turning diameter over bed 250 mm

turning diameter over slide rest 130 mm

turning length 550 mm

turning speeds 50 - 2000 U/min

centre height 125 mm

spindle bore 20 mm

tailstock quill taper MT 2

tailstock quill stroke 60 mm

metric threading 0,4 - 3,0 mm

thread - inch 10 - 44 TPI

thread - module 0,2 - 12,5 mm

connected load frequency 230 V

total power requirement 1,0 kW

weight of the machine ca. 0,12 t

dimensions of the machine ca. 1,09 x 0,59 x 0,45 m

Description :

Equipped with
- 20 mm spindle passage
- adjustable guideways
- Powerful 1.0 kW motor
- continuously variable speed
Scope of delivery:
- 3-jaw chuck 100 mm,
- 4-jaw faceplate chuck 125mm
- standing and rotating bezel
- Splash guard
- Feed protection

Datasheet

used Lathes Bench Lathe HBM 250 x 550 Norton Profi

WMT GmbH & Co.KG
Siemensstraße 1
46342 Velen-Ramsdorf
Deutschland

+49 2863 92477-47
+49 2863 92477-50
info@w-m-t.de
www.w-m-t.de

#1108-78003 · Bench Lathe

HBM - 250 x 550 Norton Profi - - -neu- -

Technical details

turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱

Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.

turning diameter over bed 250 mm

turning diameter over slide rest 140 mm

turning length 550 mm

turning speeds 125 - 2000 U/min

centre height 125 mm

spindle bore 26 mm

tailstock quill taper MT 2 MK

tailstock quill stroke 65 mm

connected load frequency 230 V

total power requirement 0,75 kW

weight of the machine ca. 0,135 t

dimensions of the machine ca. 1,25 x 0,6 x 0,6 m

Description :

Speed in 6 levels 125 - 2000rpm.
3-jaw chuck 125 mm.
4-jaw chuck 125 mm. (Independent)
Fixed bezel.
Revolving bezel.
4-fold steel holder.
chip tray.
back panel.
spindle protection.
Hardened bed rails.
Longitudinal feed with left / right switching.
Set of change gears.
Associated Tools.

Datasheet

used Lathes Bench Lathe ELMAG Superturn Vario mit MFB Vario

WMT GmbH & Co.KG
Siemensstraße 1
46342 Velen-Ramsdorf
Deutschland

+49 2863 92477-47
+49 2863 92477-50
info@w-m-t.de
www.w-m-t.de

#1108-78005 · Bench Lathe

ELMAG - Superturn Vario mit MFB Vario - - -neu- -

Technical details

turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱bore capacity in steel 16 mm︱throat 169 mm︱quill stroke 50 mm︱turning speed range - drilling 50 - 2250 U/min︱spindle drive 0,5 kW︱total power requirement 0,75 kW︱weight of the machine ca. 0,175 t︱dimensions of the machine ca. 1,3 x 0,65 x 1,3 m︱

3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.

turning diameter over bed 250 mm

turning diameter over slide rest 145 mm

turning length 550 mm

turning speeds 50 - 2000 U/min

centre height 125 mm

spindle bore 26 mm

tailstock quill taper MT 2 MK

connected load frequency 230 V

bore capacity in steel 16 mm

throat 169 mm

quill stroke 50 mm

turning speed range - drilling 50 - 2250 U/min

spindle drive 0,5 kW

total power requirement 0,75 kW

weight of the machine ca. 0,175 t

dimensions of the machine ca. 1,3 x 0,65 x 1,3 m

Description :

3-axis LCD digital display system
longitudinal feed.
3-jaw chuck 125 mm.
4-way steel holder.
chip tray, bulkhead
Hardened bed tracks.
Emergency stop switch.
lining protection
Tool box, instruction manual.

Datasheet

WMT GmbH & Co.KG
Siemensstraße 1
46342 Velen-Ramsdorf
Deutschland

+49 2863 92477-47
+49 2863 92477-50
info@w-m-t.de
www.w-m-t.de

#1108-78001 · Bench Lathe

KAMI - DKM 250L - - -neu- -

Technical details

turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱

Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection

turning diameter over bed 250 mm

turning diameter over slide rest 130 mm

turning length 700 mm

turning speeds 115 - 1620 U/min

centre height 125 mm

spindle bore 27 mm

tailstock quill taper MT 2

tailstock quill stroke 40 mm

metric threading 0,2 - 3,5 mm

thread - inch 8 - 56 inch.

thread - module 0,2 - 12,5 mm

swival range +/- Oberschlitten 45 °

connected load frequency 400 V

total power requirement 0,75 kW

weight of the machine ca. 0,15 t

dimensions of the machine ca. 1,41 x 0,61 x 0,41 m

Description :

Equipped with
- 27 mm spindle clearance
- adjustable guideways
- Powerful motor with 0.75 kW
- High resolution of the axis spindles for exact positioning
- Danger!! without digital display
Scope of delivery:
3-jaw chuck 100 mm, change gear set, splash guard.

On request also with 230 volt connection

Datasheet

used Lathes Bench Lathe HBM 250 x 550 Profi Vario

WMT GmbH & Co.KG
Siemensstraße 1
46342 Velen-Ramsdorf
Deutschland

+49 2863 92477-47
+49 2863 92477-50
info@w-m-t.de
www.w-m-t.de

#1108-78002 · Bench Lathe

HBM - 250 x 550 Profi Vario - - -neu- -

Technical details

turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱

Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.

turning diameter over bed 250 mm

turning diameter over slide rest 140 mm

turning length 550 mm

turning speeds 50 - 2000 U/min

centre height 125 mm

spindle bore 26 mm

tailstock quill taper MT 2 MK

tailstock quill stroke 65 mm

connected load frequency 230 V

total power requirement 1,1 kW

weight of the machine ca. 0,15 t

dimensions of the machine ca. 1,3 x 0,6 x 0,65 m

Description :

Benchtop lathe with base cabinet
3-axis LCD digital display system fully assembled.
Longitudinal feed.
3-jaw chuck 125 mm.
4-jaw chuck 125 mm.
Clamping plate.
4-way steel holder.
Clock for thread cutting.
Drip tray
Hardened bed tracks.
Emergency stop switch.
Forage protection
Set of wheels.
Appropriate tools.

Datasheet

WMT GmbH & Co.KG
Siemensstraße 1
46342 Velen-Ramsdorf
Deutschland

+49 2863 92477-47
+49 2863 92477-50
info@w-m-t.de
www.w-m-t.de

#1108-78000 · Bench Lathe

KAMI - DKM 250L-1 - - -neu- -

Technical details

Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.

turning diameter over bed 250 mm

turning diameter over slide rest 130 mm

turning length 700 mm

turning speeds 115 - 1620 U/min

centre height 125 mm

spindle bore 27 mm

tailstock quill taper MT 2

tailstock quill stroke 40 mm

metric threading 0,2 - 3,5 mm

thread - inch 8 - 56 inch.

thread - module 0,2 - 12,5 mm

swival range +/- Oberschlitten 45 °

connected load frequency 400 V

total power requirement 0,75 kW

weight of the machine ca. 0,15 t

dimensions of the machine ca. 1,41 x 0,61 x 0,41 m

Description :

Equipped with
- 2-axis digital measuring system with position indicator
- manufactured according to DIN 8606
- 27 mm spindle passage
- adjustable guideways "by adjustable strips"
- Strong engine with 0.75 kW
- High resolution of the axis spindles for exact positioning

Delivery:
3-jaw chuck 100 mm, change gear set, splash guard 3-axis
digital measuring system fully assembled.

Datasheet

used Lathes Bench Lathe ELMAG Superturn 250 x 550 Vario

WMT GmbH & Co.KG
Siemensstraße 1
46342 Velen-Ramsdorf
Deutschland

+49 2863 92477-47
+49 2863 92477-50
info@w-m-t.de
www.w-m-t.de

#1108-78004 · Bench Lathe

ELMAG - Superturn 250 x 550 Vario - - -neu- -

Technical details

turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,3 x 0,65 x 0,6 m︱

longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.

turning diameter over bed 250 mm

turning diameter over slide rest 145 mm

turning length 550 mm

turning speeds 50 - 2000 U/min

centre height 125 mm

spindle bore 26 mm

tailstock quill taper MT 2 MK

connected load frequency 230 V

total power requirement 0,75 kW

weight of the machine ca. 0,12 t

dimensions of the machine ca. 1,3 x 0,65 x 0,6 m

Description :

longitudinal feed.
3-jaw chuck 125 mm.
4-way steel holder.
chip tray, bulkhead
Hardened bed tracks.
Emergency stop switch.
lining protection
Tool box, instruction manual.

Datasheet

WMT GmbH & Co.KG
Siemensstraße 1
46342 Velen-Ramsdorf
Deutschland

+49 2863 92477-47
+49 2863 92477-50
info@w-m-t.de
www.w-m-t.de

#1108-78006 · Bench Lathe

HBM - 290 x 750 - - -neu- -

Technical details

turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱

2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.

turning diameter over bed 290 mm

turning diameter over slide rest 170 mm

turning length 750 mm

turning speeds 75 - 2000 U/min

centre height 145 mm

spindle bore 38 mm

tailstock quill taper MT 3 MK

tailstock quill stroke 80 mm

connected load frequency 230 V

total power requirement 1,5 kW

weight of the machine ca. 0,34 t

dimensions of the machine ca. 1,3 x 0,75 x 0,7 m

Description :

2-axis LCD digital display system (now new).
Longitudinal and transverse feed.
3-jaw chuck 160 mm.
4-jaw chuck 160 mm.
faceplate
4-way steel holder with 4 pcs tool holders
2 pcs. bezels
Machine light
Drip tray
Hardened bed tracks.
Emergency stop switch.
Feed protection
Set of wheels.
Machine tools.

Datasheet

Marcels Maschinen AG
Anthoptstrasse 11
8222 Beringen (Schaffhausen)
Schweiz

(0041) 44 872 3400
(0041) 44 872 3403
info@marcels-maschinen.ch
http://www.marcels-maschinen.ch

#1065-4180 · Bench Lathe

SCHAUBLIN - 102 N - - -

Technical details

centre height 102 mm︱Distance between centres 450 mm︱turning dia. over face-slide 120 mm︱turning diameter over bed 200 mm︱spindle taper: W20 ︱spindle bore 22 mm︱number of spindle speeds 18 ︱from/to 45-2500 U/min︱tailstock quill taper MT 2 ︱diameter of quill 30 mm︱quill stroke 110 mm︱dimensions of the machine ca. 1500x800x1400 mmxmmxmm︱weight 380 kg︱accessories and equipment: ︱3-jaw-chuck diameter 100 mm︱quick change tool holder: ︱make MULTIFIX ︱boring chuck 1 ︱misc. accessories ︱

centre height 102 mm

Distance between centres 450 mm

turning dia. over face-slide 120 mm

turning diameter over bed 200 mm

spindle taper: W20

spindle bore 22 mm

number of spindle speeds 18

from/to 45-2500 U/min

tailstock quill taper MT 2

diameter of quill 30 mm

quill stroke 110 mm

dimensions of the machine ca. 1500x800x1400 mmxmmxmm

weight 380 kg

3-jaw-chuck diameter 100 mm

make MULTIFIX

boring chuck 1

Datasheet

CNC Lathe - Inclined Bed Type

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-9020 · CNC Lathe - Inclined Bed Type

KRAFT - BML - - Fabrikneu - Siemens/Heidenhain/Fanuc

Technical details

turning diameter 600,630 mm︱turning length 549,790,1290,1475,1526 mm︱control Siemens/Heidenhain/Fanuc ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

turning diameter 600,630 mm

turning length 549,790,1290,1475,1526 mm

control Siemens/Heidenhain/Fanuc

Datasheet

used Lathes CNC Lathe - Inclined Bed Type KRAFT SS-27 | SS-31 | SS-35

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-91090 · CNC Lathe - Inclined Bed Type

KRAFT - SS-27 | SS-31 | SS-35 - - Fabrikneu - Fanuc/Siemens

Technical details

SS-27 | SS-31 | SS-35 ︱turning diameter 700|790|890 mm︱turning length 700/1200/1700/2200/3200/4 mm︱control Siemens 828D ︱spindle nose A2-11/A2-15/A2-20/A2-28/A ︱spindle bore 153/230/255/318/360/410/5 mm︱spindle speeds 20-1200/16-700/13-600/14- 1/min︱speed steps work spindle 4-stufig (automatisch sch ︱cross feed 0,001~250 mm/min︱feed in z-axis 0,001~400 mm/min︱rapid travel - longitudinal/face 8/10 m/min︱dia of ball screw 45 mm in X-Achse / 60 mm ︱tool turret 10- oder 12-fach ︱tool taper VDI 40/50 oder Schaftaufn ︱tool holder -shaft diameter 32x32 mm︱diameter tailstock quill 160 mm︱ 200 mm︱tailstock quill taper MT 5 ︱spindle drive 30/37 (37/45 opt.) kW︱servo motor X-axis 3,8 kw︱

Solid slant bed esures the lathe´s accuracy stability even in the situation of heavy cutting. Wide span rectangle sliding guides possess strong ability of anti-bending, anti-twisting and anti-overturning. Applied abrasion-proof material of low friction coefficient and cooperated with the optimum positioning accuracy even in rapid feeding. Straight line rolling guides meet the requirements of high speed and high efficiency, reduce friction resistance and thermal deformation, improve machining accuracy and ensure long period stability of machining accuracy. Due to fact that Servomotors of X-axis and Z-axis are connected directly with precision ball screws through can be obtained elastic coupling and obtained high precision.

SS-27 | SS-31 | SS-35

turning diameter 700|790|890 mm

turning length 700/1200/1700/2200/3200/4 mm

control Siemens 828D

spindle nose A2-11/A2-15/A2-20/A2-28/A

spindle bore 153/230/255/318/360/410/5 mm

spindle speeds 20-1200/16-700/13-600/14- 1/min

speed steps work spindle 4-stufig (automatisch sch

cross feed 0,001~250 mm/min

feed in z-axis 0,001~400 mm/min

rapid travel - longitudinal/face 8/10 m/min

dia of ball screw 45 mm in X-Achse / 60 mm

tool turret 10- oder 12-fach

tool taper VDI 40/50 oder Schaftaufn

tool holder -shaft diameter 32x32 mm

diameter tailstock quill 160 mm

200 mm

tailstock quill taper MT 5

spindle drive 30/37 (37/45 opt.) kW

servo motor X-axis 3,8 kw

Description :

Solid slant bed esures the lathe´s accuracy stability even in the situation of heavy cutting.
Wide span rectangle sliding guides possess strong ability of anti-bending, anti-twisting and anti-overturning.
Applied abrasion-proof material of low friction coefficient and cooperated with the optimum positioning accuracy even in rapid feeding.
Straight line rolling guides meet the requirements of high speed and high efficiency, reduce friction resistance and thermal deformation, improve machining accuracy and ensure long period stability of machining accuracy.
Due to fact that Servomotors of X-axis and Z-axis are connected directly with precision ball screws through can be obtained elastic coupling and obtained high precision.

Datasheet

used Lathes CNC Lathe - Inclined Bed Type KRAFT TC-2500L

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-35459 · CNC Lathe - Inclined Bed Type

KRAFT - TC-2500L - - Fabrikneu - Fanuc 0i TD m. MANUAL GUIDE i

Technical details

turning diameter 300 mm︱turning length 600 mm︱control Fanuc 0i TD ︱swing diameter over bed slide 320 mm︱swing over bed 520 mm︱bar material dia. 64 mm︱spindle speeds 4500 1/min.︱spindle drive 11/15 kW︱coolant system ︱chip conveyor ︱heat exchanger ︱hollow chuck ︱turret 12-fach ︱CE-design ︱Tool setter ︱hard jaws ︱soft jaw ︱part catcher ︱Tool setter manuell ︱bar feeder interface ︱

brand new CNC turning center with Contains: 1 CONTROL SYSTEM FANUC 0i-T (10.4" DISPLAY) 2 X/Z AXIS STROKE 170/600 MM 3 X/Z AXIS RAPID TRAVERSE 30/30 M/MIN 4 SPINDLE MOTOR 11/15 KW 5 SPINDLE SPEED 3,500 RPM (BELT-DRIVEN TYPE) 6 SPINDLE BEARING DIA. F 120 MM 7 BAR CAPACITY DIA. F 64 MM 8 HYD. HOLLOW CHUCK 10" X 3 JAWS 9 HYD. UNIT FOR CHUCK WITH AIR COOLER 10 SERVO-DRIVEN TURRET SYSTEM 12 STATIONS 11 MANUAL TAILSTOCK STROKE 500 MM + QUILL STROKE 100 MM 12 ELECTRICAL CABINET WITH HEAT EXCHANGER 13 STANDARD SPLASH GUARD 14 COOLANT UNIT 15 TRANSFORMER (POWER SOURCE 380V) 16 CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) 17 MACHINE COLOR TONGTAI WHITE/DRAK GREY 18 TRICOLOR LAMP 19 FANUC WARRANTY STANDARD ACCESSORIES: 1 FACING TOOL HOLDER × 2 PCS 2 O.D. TOOL GASKET × 8 PCS 3 I.D. TOOL HOLDER (?32 MM) × 4 PCS 4 BORING SLEEVE × 6 PCS (DIA.?8, 10, 12, 16, 20, 25 MM) 5 DRILLING SLEEVE × 3 PCS (MT#1, 2, 3) 6 SOFT JAWS × 1 SET 7 ROTATING CENTER × 1 PC (MT#5) OPTIONS: 1 CE MARK 2 MANUAL GUIDE i 3 TOOL PRESETTER (MANUAL) 4 PART CATCHER 5 BAR FEEDER CONNECTION INTERFACE 6 WORK-PIECE CONVEYOR (BELT TYPE)

turning diameter 300 mm

turning length 600 mm

control Fanuc 0i TD

swing diameter over bed slide 320 mm

swing over bed 520 mm

bar material dia. 64 mm

spindle speeds 4500 1/min.

spindle drive 11/15 kW

turret 12-fach

Tool setter manuell

Description :

brand new CNC turning center with

Contains:
1 CONTROL SYSTEM FANUC 0i-T (10.4" DISPLAY)
2 X/Z AXIS STROKE 170/600 MM
3 X/Z AXIS RAPID TRAVERSE 30/30 M/MIN
4 SPINDLE MOTOR 11/15 KW
5 SPINDLE SPEED 3,500 RPM (BELT-DRIVEN TYPE)
6 SPINDLE BEARING DIA. F 120 MM
7 BAR CAPACITY DIA. F 64 MM
8 HYD. HOLLOW CHUCK 10" X 3 JAWS
9 HYD. UNIT FOR CHUCK WITH AIR COOLER
10 SERVO-DRIVEN TURRET SYSTEM 12 STATIONS
11 MANUAL TAILSTOCK STROKE 500 MM + QUILL STROKE 100 MM
12 ELECTRICAL CABINET WITH HEAT EXCHANGER
13 STANDARD SPLASH GUARD
14 COOLANT UNIT
15 TRANSFORMER (POWER SOURCE 380V)
16 CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE)
17 MACHINE COLOR TONGTAI WHITE/DRAK GREY
18 TRICOLOR LAMP
19 FANUC WARRANTY

STANDARD ACCESSORIES:

1 FACING TOOL HOLDER × 2 PCS
2 O.D. TOOL GASKET × 8 PCS
3 I.D. TOOL HOLDER (?32 MM) × 4 PCS
4 BORING SLEEVE × 6 PCS (DIA.?8, 10, 12, 16, 20, 25 MM)
5 DRILLING SLEEVE × 3 PCS (MT#1, 2, 3)
6 SOFT JAWS × 1 SET
7 ROTATING CENTER × 1 PC (MT#5)

OPTIONS:

1 CE MARK
2 MANUAL GUIDE i
3 TOOL PRESETTER (MANUAL)
4 PART CATCHER
5 BAR FEEDER CONNECTION INTERFACE
6 WORK-PIECE CONVEYOR (BELT TYPE)

Datasheet

used Lathes CNC Lathe - Inclined Bed Type KRAFT SA-35 | SA-40 | SA-45

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-91095 · CNC Lathe - Inclined Bed Type

KRAFT - SA-35 | SA-40 | SA-45 - - Fabrikneu - Fanuc/Siemens

Technical details

SA-35 | SA-40 | SA-45 ︱turning diameter 890|1020|1145 mm︱turning length 700/1200/1700/2200/3200/4 mm︱control Siemens 828D ︱spindle nose A2-11/A2-15/A2-20/A2-28/A ︱spindle bore 153/230/255/318/360/410/5 mm︱spindle speeds 20-1200/16-700/13-600/14- 1/min︱rapid travel - longitudinal/face 8/10 m/min︱cross feed 0,001~250 mm/min.︱feed in z-axis 0,001~400 mm/min︱dia of ball screw 50 mm in X-Achse / 80 mm ︱tool turret 10-/12-fach ︱tool taper VDI 40/50 oder Schaft ︱tool holder -shaft diameter 32x32 mm︱diameter tailstock quill 235 mm︱ 200 mm︱tailstock quill taper MT 6 ︱spindle drive 37/45 (50/60 opt.) kW︱servo motor X-axis 4,5 (6 opt.) ︱servo motor Z-axis 4,5 (6 opt.) kw︱

SA-35 | SA-40 | SA-45

turning diameter 890|1020|1145 mm

turning length 700/1200/1700/2200/3200/4 mm

control Siemens 828D

spindle nose A2-11/A2-15/A2-20/A2-28/A

spindle bore 153/230/255/318/360/410/5 mm

spindle speeds 20-1200/16-700/13-600/14- 1/min

rapid travel - longitudinal/face 8/10 m/min

cross feed 0,001~250 mm/min.

feed in z-axis 0,001~400 mm/min

dia of ball screw 50 mm in X-Achse / 80 mm

tool turret 10-/12-fach

tool taper VDI 40/50 oder Schaft

tool holder -shaft diameter 32x32 mm

diameter tailstock quill 235 mm

200 mm

tailstock quill taper MT 6

spindle drive 37/45 (50/60 opt.) kW

servo motor X-axis 4,5 (6 opt.)

servo motor Z-axis 4,5 (6 opt.) kw

Description :

Solid slant bed esures the lathe´s accuracy stability even in the situation of heavy cutting.
Wide span rectangle sliding guides possess strong ability of anti-bending, anti-twisting and anti-overturning.
Applied abrasion-proof material of low friction coefficient and cooperated with the optimum positioning accuracy even in rapid feeding.
Straight line rolling guides meet the requirements of high speed and high efficiency, reduce friction resistance and thermal deformation, improve machining accuracy and ensure long period stability of machining accuracy.
Due to fact that Servomotors of X-axis and Z-axis are connected directly with precision ball screws through can be obtained elastic coupling and obtained high precision.

Datasheet

used Lathes CNC Lathe - Inclined Bed Type Tongtai HS-22 mit Stangenlader 1200 (o

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-29999 · CNC Lathe - Inclined Bed Type

Tongtai - HS-22 mit Stangenlader 1200 (o - - 2020 - Fanuc 0i-TF Manual Guide (Werk

Technical details

turning diameter 220 mm︱turning length 200 mm︱control Fanuc 0i-TF Manual Guide ︱bar material dia. 26 mm︱spindle speeds 6000 1/min.︱spindle drive 7,5/11 kW︱rapid speed 20 m/min︱travel -x axis 155 mm︱travel - z 200 mm︱CNC controller Fanuc 0i-TF Manual Guide ︱turret 12 (hydr.) fach︱heat exchanger for electr. cabinet ︱hydraulic unit mit Lufkühlung ︱hollow chuck hydraulisch, 150 mm︱transformator ︱coolant system ︱signal lamp ︱tool holder 4 Stück Innen (Ø32mm), 6 ︱CE-design ︱part catcher ︱

Contains: 1.Control system Fanuc 0i-TD (8.4"COLOR LCD) 2.Spindle motor 7.5/11KW Fanuc â8/8000i 3.Spindle speed 6.000 RPM (Bar capacity: Dia 26mm) 4.X/Z-Axis stroke 155/220 mm 5.X/Z Axis rapid traverse 20/20 m/min 6.Hyd.hollow chuck 6" x 3 jaws 7.Hydraulic turret system 12 stations 8.Hyd. Unit for chuck with air cooler 9.Without tailstock 10.Standard splash guard 11.Electrical cabinet with heat exchanger 12.Coolant unit 13.Transformer 14.Chip conveyor with trolley (chain type) 15.Machine color TongTai grey/blue 16.Fanuc warranty Standard accessories: 1.O.D. tool holder x 2 pcs 2.O.D. tool gasket x 6 pcs 3.I.D. tool holder x 4 pcs 4.ID tool holder dia 32mm x 4 pcs 5.Boring sleeve x 6 pcs (Dia 10,12,16,20,25,32) 6.Drilling sleeve x 3 pcs (MT#1,2,3) 7.Soft Jaws x 1 set Options: 1.CE Mark 2.Balance of spindle dia 85 mm with bar capacity die 44 mm Spindle speed 4800 RPM & Hyd. hollow chuck 8" x 3 jaws 3.Tool presetter (by manual) 4.Add soft jaws x 5 sets for 8"chuck 5.Hard jaws x 1 set (for 8"chuck use) 6. Dynamic graphic display function

turning diameter 220 mm

turning length 200 mm

control Fanuc 0i-TF Manual Guide

bar material dia. 26 mm

spindle speeds 6000 1/min.

spindle drive 7,5/11 kW

rapid speed 20 m/min

travel -x axis 155 mm

travel - z 200 mm

CNC controller Fanuc 0i-TF Manual Guide

turret 12 (hydr.) fach

hydraulic unit mit Lufkühlung

hollow chuck hydraulisch, 150 mm

tool holder 4 Stück Innen (Ø32mm), 6

Description :

Contains:

1.Control system Fanuc 0i-TD (8.4"COLOR LCD)
2.Spindle motor 7.5/11KW Fanuc â8/8000i
3.Spindle speed 6.000 RPM (Bar capacity: Dia 26mm)
4.X/Z-Axis stroke 155/220 mm
5.X/Z Axis rapid traverse 20/20 m/min
6.Hyd.hollow chuck 6" x 3 jaws
7.Hydraulic turret system 12 stations
8.Hyd. Unit for chuck with air cooler
9.Without tailstock
10.Standard splash guard
11.Electrical cabinet with heat exchanger
12.Coolant unit
13.Transformer
14.Chip conveyor with trolley (chain type)
15.Machine color TongTai grey/blue
16.Fanuc warranty

Standard accessories:

1.O.D. tool holder x 2 pcs
2.O.D. tool gasket x 6 pcs
3.I.D. tool holder x 4 pcs
4.ID tool holder dia 32mm x 4 pcs
5.Boring sleeve x 6 pcs (Dia 10,12,16,20,25,32)
6.Drilling sleeve x 3 pcs (MT#1,2,3)
7.Soft Jaws x 1 set

Options:

1.CE Mark
2.Balance of spindle dia 85 mm with bar capacity die 44 mm Spindle speed 4800 RPM & Hyd. hollow chuck 8" x 3 jaws
3.Tool presetter (by manual)
4.Add soft jaws x 5 sets for 8"chuck
5.Hard jaws x 1 set (for 8"chuck use)
6. Dynamic graphic display function

Datasheet

used Lathes CNC Lathe - Inclined Bed Type KRAFT TC-1500

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-35457 · CNC Lathe - Inclined Bed Type

KRAFT - TC-1500 - - 2020 - Fanuc 0i TF mit Manual Guide

Technical details

turning diameter 300 mm︱turning length 320 mm︱control Fanuc 0i TD MG ︱max. swing diameter 520 mm︱spindle speeds 4800 1/min.︱spindle passage 44 mm︱spindle drive 7,5/9 kW︱

brand new CNC slant bed lathe with 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 170/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 4500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 100 mm 7. Bar capacity Ø dia 51 mm) 8. Hydraulic Hollow chuck 8" x 3 jaws 9. Hyd. unit for chuck with air cooler 10. Servo driven turret system 12 stations 11. Manual tailstock stroke 500 mm + quill stroke 100 mm 12. Electrical cabinet with heat exchanger 13. Standard splash guide 14. Coolant unit 15. Transformer (power source 380V) 16. Chip conveyor H=1100 MM with trolley (chain type) 17. Machine color Tongtai white/Dark grey 18. Safety foot switch 19. Tricolor lamp 20. Fanuc warranty (western Europe) Standard accessories 1. Facing tool holders x 2 pcs 2. O.D. tool gaskets x 8 pcs 3. I.D. tool holder (dia 32 mm) x 4 pcs 4. Boring sleeve x 6 pcs (dia 8, 10, 12, 16, 20, 25 mm) 5. Drilling sleeve x 3 pcs (mt#1, 2, 3) 6. Soft jaws x 1 set 7. Rotating center x 1 pc (MT#4) installed Options: 1. CE mark 2. Tool presetter (manual) 3. Parts catcher 4. Workpiece conveyor 5. Bar feeder interface 6. Hard jaws x 1 set 7. Soft jaws x 5 sets 8. Manual guide I function + 10.4" screen warranty: 12 months on parts Machine is made by the biggest maker of machine tools in Taiwan, also builiding for wellknown japanese makers.

turning diameter 300 mm

turning length 320 mm

control Fanuc 0i TD MG

max. swing diameter 520 mm

spindle speeds 4800 1/min.

spindle passage 44 mm

spindle drive 7,5/9 kW

Description :

brand new CNC slant bed lathe with

1. Control system Fanuc Oi-TD (8,4" LCD monitor)
2. X/Z-axis stroke 170/600 mm
3. X/Z-axis rapid traverse 30/30 M/MIN
4. Spindle motor 11 / 15 Kw
5. Spindle speed 4500 rpm (Belt driven type)
6. Spindle bearing dia. Ø 100 mm
7. Bar capacity Ø dia 51 mm)
8. Hydraulic Hollow chuck 8" x 3 jaws
9. Hyd. unit for chuck with air cooler
10. Servo driven turret system 12 stations
11. Manual tailstock stroke 500 mm + quill stroke 100 mm
12. Electrical cabinet with heat exchanger
13. Standard splash guide
14. Coolant unit
15. Transformer (power source 380V)
16. Chip conveyor H=1100 MM with trolley (chain type)
17. Machine color Tongtai white/Dark grey
18. Safety foot switch
19. Tricolor lamp
20. Fanuc warranty (western Europe)

Standard accessories
1. Facing tool holders x 2 pcs
2. O.D. tool gaskets x 8 pcs
3. I.D. tool holder (dia 32 mm) x 4 pcs
4. Boring sleeve x 6 pcs (dia 8, 10, 12, 16, 20, 25 mm)
5. Drilling sleeve x 3 pcs (mt#1, 2, 3)
6. Soft jaws x 1 set
7. Rotating center x 1 pc (MT#4)

installed Options:
1. CE mark
2. Tool presetter (manual)
3. Parts catcher
4. Workpiece conveyor
5. Bar feeder interface
6. Hard jaws x 1 set
7. Soft jaws x 5 sets
8. Manual guide I function + 10.4" screen

warranty: 12 months on parts

Machine is made by the biggest maker of machine tools in Taiwan, also builiding for wellknown japanese makers.

Datasheet

used Lathes CNC Lathe - Inclined Bed Type HAAS SL 30

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03588 · CNC Lathe - Inclined Bed Type

HAAS - SL 30 - - 2018 - Haas

Technical details

turning diameter 762 mm︱turning length 864 mm︱control Haas ︱chucking diameter 254 mm︱hollow 76 mm︱swing diameter 762 mm︱turning speeds 3400 U/min︱output 407 Nm︱Power 22 KW︱Tool changer 12 VDI 40 ︱transmission ratio 2 ︱hydraulic tailstock ︱total power requirement kW︱weight of the machine ca. 7.3 T t︱dimensions of the machine ca. 3.3 X 2 X 1.9 H m︱

with manual guide (HAAS control) WIT C AXIS AND LIVE TOOLS CHIP CONVOYER TAILSTOCK

turning diameter 762 mm

turning length 864 mm

control Haas

chucking diameter 254 mm

hollow 76 mm

swing diameter 762 mm

turning speeds 3400 U/min

output 407 Nm

Power 22 KW

Tool changer 12 VDI 40

transmission ratio 2

weight of the machine ca. 7.3 T t

dimensions of the machine ca. 3.3 X 2 X 1.9 H m

Description :

with manual guide (HAAS control)
WIT C AXIS AND LIVE TOOLS
CHIP CONVOYER TAILSTOCK

Datasheet

used Lathes CNC Lathe - Inclined Bed Type TSUGAMI MO8 DE

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03932 · CNC Lathe - Inclined Bed Type

TSUGAMI - MO8 DE - - 2017 - FANUC Oi TD

Technical details

turning diameter 260 mm︱turning length 400 mm︱control FANUC Oi TD ︱Spindle Bore: 66 mm︱turning speed range - spindle 4500 U/min︱feed range - turret / stepless 1 - 12000 mm/min︱rapid traverse 24/27 m/min︱ 1 Stück︱ 12 Stationen︱tool taper Direktaufnahme ︱total power requirement 30 kW︱weight of the machine ca. 5.6 t︱dimensions of the machine ca. 2500 C 1850 X 1750 mm︱ JA ︱ JA ︱ JA ︱ JA ︱ JA ︱

CNC FANUC C AXIS AND MOOWING TOOLS VERY NICE tailstol chip convoyeur turret 12 positions

turning diameter 260 mm

turning length 400 mm

control FANUC Oi TD

Spindle Bore: 66 mm

turning speed range - spindle 4500 U/min

feed range - turret / stepless 1 - 12000 mm/min

rapid traverse 24/27 m/min

1 Stück

12 Stationen

tool taper Direktaufnahme

total power requirement 30 kW

weight of the machine ca. 5.6 t

dimensions of the machine ca. 2500 C 1850 X 1750 mm

Description :

CNC FANUC C AXIS AND MOOWING TOOLS VERY NICE
tailstol
chip convoyeur
turret 12 positions

Datasheet

used Lathes CNC Lathe - Inclined Bed Type LEADWELL F 1

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03996 · CNC Lathe - Inclined Bed Type

LEADWELL - F 1 - - 2016 - FANUC O I TC

Technical details

turning diameter 440 mm︱turning length 420 mm︱control FANUC O I TC ︱travel -x axis 140 mm︱ 460 mm︱Spindle Bore: 62 mm︱Number of Turrets: 1 Stück︱no. of tools in turret 1 12 Stück︱ 4000 U/min︱power capacity 11 kW︱spindle nose A2-5 ︱feed range 1 - 15000 mm/min︱rapid traverse 30 m/min︱

CNC FANUC OI TB 2 AXIS WITH CHUCK AND TAILSTOCK

turning diameter 440 mm

turning length 420 mm

control FANUC O I TC

travel -x axis 140 mm

460 mm

Spindle Bore: 62 mm

Number of Turrets: 1 Stück

no. of tools in turret 1 12 Stück

4000 U/min

power capacity 11 kW

spindle nose A2-5

feed range 1 - 15000 mm/min

rapid traverse 30 m/min

Description :

CNC FANUC OI TB
2 AXIS
WITH CHUCK AND TAILSTOCK

Datasheet

used Lathes CNC Lathe - Inclined Bed Type WAGNER WDC 480

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03885 · CNC Lathe - Inclined Bed Type

WAGNER - WDC 480 - - 2014 - SIEMENS 828 D

Technical details

turning diameter 295 mm︱turning length 1250 mm︱control SIEMENS 828 D ︱max. swing diameter 460 mm︱spindle head KK6 DIN 55026 ︱bar material dia. 52 mm︱turning speed range 3500 U/min︱spindle drive 7 kW︱Torque 151 Nm︱tool diameter 32 mm︱rapid traverse 30/15 m/min︱total power requirement 18 kW︱weight of the machine ca. 3.4 t︱dimensions of the machine ca. 2,5 x 1,7 x 1,8 m︱power chuck 210 mm ︱

CNC SIEMENS 828 D TURRET VDI 30 with REITSTOCK CHIP CONVOYER

turning diameter 295 mm

turning length 1250 mm

control SIEMENS 828 D

max. swing diameter 460 mm

spindle head KK6 DIN 55026

bar material dia. 52 mm

turning speed range 3500 U/min

spindle drive 7 kW

Torque 151 Nm

tool diameter 32 mm

rapid traverse 30/15 m/min

total power requirement 18 kW

weight of the machine ca. 3.4 t

dimensions of the machine ca. 2,5 x 1,7 x 1,8 m

Description :

CNC SIEMENS 828 D
TURRET VDI 30
with REITSTOCK
CHIP CONVOYER

Datasheet

used Lathes CNC Lathe - Inclined Bed Type DMG MORI NLX 2500 / 700

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03786 · CNC Lathe - Inclined Bed Type

DMG MORI - NLX 2500 / 700 - - 2014 - CELOS

Technical details

turning diameter max. 356 mm︱turning length max. 705 mm︱control CELOS ︱greates pass round over bed 920 mm︱ 742 mm︱ 330 mm︱︱ 4.000 min/-1︱ 18,5 / 15 kW︱spindle nose JIS A-8 ︱spindle bearing diameter 140 mm︱spindle bore 91 mm︱ 80 mm︱ ( - ) mm︱chucking diameter 250 mm︱︱x-travel 260 mm︱z-travel 795 mm︱ 30 / 10 / 30 m/min︱︱

CNC - Turning LATHE 2 AXIS DMG MORI - NLX 2500 / 700 WITH TAILSTOC 3JAW CHUCK CHIP CONVOYER

turning diameter max. 356 mm

turning length max. 705 mm

control CELOS

greates pass round over bed 920 mm

742 mm

330 mm

4.000 min/-1

18,5 / 15 kW

spindle nose JIS A-8

spindle bearing diameter 140 mm

spindle bore 91 mm

80 mm

( - ) mm

chucking diameter 250 mm

x-travel 260 mm

z-travel 795 mm

30 / 10 / 30 m/min

Description :

CNC - Turning LATHE 2 AXIS
DMG MORI - NLX 2500 / 700
WITH TAILSTOC
3JAW CHUCK
CHIP CONVOYER

Datasheet

used Lathes CNC Lathe - Inclined Bed Type HEMBRUG Mikroturn Twin Spindle

Bema Werkzeugmaschinen
Hegelstr. 28
73230 Kirchheim
Deutschland

+49 702171799
+49 7021978711
bema@gebrauchtmaschine.de
www.gebrauchtmaschine.de

#1056-8239 · CNC Lathe - Inclined Bed Type

HEMBRUG - Mikroturn Twin Spindle - - 2013 - Siemens 840D

Technical details

turning diameter 100 mm︱turning length siehe Datenblatt mm︱control Siemens 840D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

Almost new machine Ultra precision hard lathe for hardened workpieces up to 70 HRC Hydrostatic spindles Direct-drive axles in X and Z !!! Hydrostatic guideways -2 spindle 10.000 rpm 8.000 rpm -Sauter tool turret 6 tools "fixed" / 6 tools driven axial/radial machining with Benz tool systems (engraving, drilling, milling) -Hainbuch clamping system -Schaublin clamping system -jaw chuck -tool measuring system / probe for component measurement -Preparation for automation cell -Chip conveyor -suction system -cooling unit -Fire extinguishing system for applications with oil-KSS Translated with www.DeepL.com/Translator (free version)

turning diameter 100 mm

turning length siehe Datenblatt mm

control Siemens 840D

Description :

Almost new machine

Ultra precision hard lathe
for hardened workpieces up to 70 HRC

Hydrostatic spindles
Direct-drive axles in X and Z !!!
Hydrostatic guideways

-2 spindle 10.000 rpm 8.000 rpm
-Sauter tool turret 6 tools "fixed" / 6 tools driven
axial/radial machining with Benz tool systems (engraving, drilling, milling)
-Hainbuch clamping system
-Schaublin clamping system
-jaw chuck
-tool measuring system / probe for component measurement
-Preparation for automation cell
-Chip conveyor
-suction system
-cooling unit
-Fire extinguishing system for applications with oil-KSS

Translated with www.DeepL.com/Translator (free version)

Datasheet

used Lathes CNC Lathe - Inclined Bed Type WEMAS Turn 210-52

Gustav Schönberger GmbH
Hünderstr. 14
74080 Heilbronn
Deutschland

(0049)7131 46060
(0049)7131 460620
schoenberger@gsh-maschinen.de
www.gsh-maschinen.de

#1036-032983 · CNC Lathe - Inclined Bed Type

WEMAS - Turn 210-52 - - 2013 - Fanuc Oi-TD

Technical details

turning diameter 303 mm︱turning length 334 mm︱control Fanuc Oi-TD ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

Fanuc Oi-TD CNC control 12-fold turret head (VDI 30 taper) collet chuck device C-axis driven tools tailstock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser über Bett / max rotary diameter over bed 460 mm max. Umlaufdurchmesser über Schlitten / max rotary diameter over sledge 328 mm max. Drehdurchmesser / max. turning diameter 303 mm max. Drehlänge / max. turning lenght 334 mm Planweg (x) / cross way (x) 181 mm Längsweg (z) / longitudinal way (z) 390 mm max. Stangendurchmesser / max bar diameter 52 mm Drehzahlbereich / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang x,z / rapid feed x,z 30,30 m/min Antriebsleistung Spindel / drive capacity spindle 9/11 kW Gewicht der Maschine ca. / weight 3000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

turning diameter 303 mm

turning length 334 mm

control Fanuc Oi-TD

Description :

Fanuc Oi-TD CNC control
12-fold turret head (VDI 30 taper)
collet chuck device
C-axis
driven tools
tailstock
coolant device
chip conveyor

Technische Daten / technical details:
max. Umlaufdurchmesser über Bett / max rotary diameter over bed 460 mm
max. Umlaufdurchmesser über Schlitten / max rotary diameter over sledge 328
mm
max. Drehdurchmesser / max. turning diameter 303 mm
max. Drehlänge / max. turning lenght 334 mm
Planweg (x) / cross way (x) 181 mm
Längsweg (z) / longitudinal way (z) 390 mm
max. Stangendurchmesser / max bar diameter 52 mm
Drehzahlbereich / spindle speed 4500 UpM /rpm
Werkzeugrevolver / turret head 12 fach /holes
Eilgang x,z / rapid feed x,z 30,30 m/min
Antriebsleistung Spindel / drive capacity spindle 9/11 kW
Gewicht der Maschine ca. / weight 3000 kg
Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
Technical data, accessories and description of the machine are not binding.

Datasheet

used Lathes CNC Lathe - Inclined Bed Type CMZ TX 66 QUATRO

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03970 · CNC Lathe - Inclined Bed Type

CMZ - TX 66 QUATRO - - 2012 - FANUC 31 I TB

Technical details

turning diameter 270 mm︱turning length 640 mm︱control FANUC 31 I TB ︱swing diameter over bed slide 270 mm︱spindle turning speed - stepless 4000 U/min︱spindle bore 66 mm︱power capacity 15 kW︱total power requirement 20 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3, x 2.2 x 2 m︱Manual Guide ︱Powered Tooling ︱12 - tool turret ︱C - axis 0.001° ︱part catcher with ejector ︱Chip-conveyor ︱

NICE MACHINE 6 AXIS WITH SUP SPINDEL 2 TURRET 2 X C AXIS Y AXIS LIVE TOOLS WITH LNS BAR FEEDER AND CONVOYER SOMME LIVE TOOLS

turning diameter 270 mm

turning length 640 mm

control FANUC 31 I TB

swing diameter over bed slide 270 mm

spindle turning speed - stepless 4000 U/min

spindle bore 66 mm

power capacity 15 kW

total power requirement 20 kW

weight of the machine ca. 9 t

dimensions of the machine ca. 3, x 2.2 x 2 m

Description :

NICE MACHINE 6 AXIS
WITH SUP SPINDEL
2 TURRET
2 X C AXIS
Y AXIS LIVE TOOLS
WITH LNS BAR FEEDER
AND CONVOYER
SOMME LIVE TOOLS

Datasheet

used Lathes CNC Lathe - Inclined Bed Type MAZAK QT Smart 200M

Gustav Schönberger GmbH
Hünderstr. 14
74080 Heilbronn
Deutschland

(0049)7131 46060
(0049)7131 460620
schoenberger@gsh-maschinen.de
www.gsh-maschinen.de

#1036-032921 · CNC Lathe - Inclined Bed Type

MAZAK - QT Smart 200M - - 2012 - Mazatrol Smart

Technical details

turning diameter 350 mm︱turning length 532 mm︱control Mazatrol Smart ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

turning diameter 350 mm

turning length 532 mm

control Mazatrol Smart

Description :

Mazatrol Smart CNC control
3-jaw chuck
C-axis
driven tools
12-fold revolver
Tool Eye
tail stock
coolant device
chip conveyor

Technische Daten / technical details:
max. Umlaufdurchmesser / max. swing diameter 660 mm
max. Drehdurchmesser/ max. turning diameter 350 mm
max. Drehlänge / max. turning length 532 mm
Planweg (x) / cross way (x) 225 mm
Längsweg (z) / longitudinal way (z) 560 mm
Drehzahlbereich / spindle speed 5000 UpM /rpm
Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm
Werkzeugrevolver / turret head 12 fach /holes
Eilgang X/Z / rapid feed X/Z 30/33 m/min
Antriebsleistung Spindel / drive capacity spindle 15 kW
Gewicht der Maschine ca. / weight 4500 kg
Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
Technical data, accessories and description of the machine are not binding.

Datasheet

TOP Manufacturer:

HBM - KAMI - ELMAG - SCHAUBLIN -