,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Lathes

          Machinelist: Lathes


          Center Lathe

          used Lathes Center Lathe COMEV CM 400 x 3000


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20443 · Center Lathe

          COMEV - CM 400 x 3000 - - 2011 -

          Technical details
          turning diameter over bed 800 mm︱turning diameter over slide rest 580 mm︱turning length 3.000 mm︱center height over bed 400 mm︱centre distance 3.000 mm︱digital readout 3-Achsen HEIDENHAIN︱bed width 400 mm︱spindle bore 110 mm︱turning speed range 25 - 1.610 U/min︱power requirement 9,2 kW︱3-jaw-chuck diameter 315 mm︱quick change toolholder MULTIFIX Typ C︱taper in tailstock-quill MK 5 ︱dia. of quill 100 mm︱quill stroke 340 mm︱coolant ︱voltage 380 V︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 4,90 x 1,60 x 2,00 m︱
          - Serial No.: 7634 - Rapid feed for Z- and X-Axis - 3-Axis DRO System HEIDENHAIN - 3-Jaw Chuck FORKARDT F+315, dia.31 5mm - Quich Change Tool Holders MULTIFIX - fixed steady rest - rotating center - Face chuck, dia. 800 mm - various tool holders - Coolant equipment Machine is in excellent condition!
            turning diameter over bed 800 mm
            turning diameter over slide rest 580 mm
            turning length 3.000 mm
            center height over bed 400 mm
            centre distance 3.000 mm
            digital readout 3-Achsen HEIDENHAIN
            bed width 400 mm
            spindle bore 110 mm
            turning speed range 25 - 1.610 U/min
            power requirement 9,2 kW
            3-jaw-chuck diameter 315 mm
            quick change toolholder MULTIFIX Typ C
            taper in tailstock-quill MK 5
            dia. of quill 100 mm
            quill stroke 340 mm
            voltage 380 V
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 4,90 x 1,60 x 2,00 m
            Description :
            - Serial No.: 7634
            - Rapid feed for Z- and X-Axis
            - 3-Axis DRO System HEIDENHAIN
            - 3-Jaw Chuck FORKARDT F+315, dia.31 5mm
            - Quich Change Tool Holders MULTIFIX
            - fixed steady rest
            - rotating center
            - Face chuck, dia. 800 mm
            - various tool holders
            - Coolant equipment

            Machine is in excellent condition!


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe BOEHRINGER VDF DUE 630


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20331 · Center Lathe

          BOEHRINGER - VDF DUE 630 - - 1989/2024 -

          Technical details
          turning diameter over bed 640 mm︱turning diameter over slide rest 385 mm︱turning length 3000 mm︱center height over bed 315 mm︱centre distance 3000 mm︱digital readout 3-Achsen HEIDENHAIN︱bed width 450 mm︱spindle taper KK 8 DIN 55022︱spindle bore 82 mm︱turning speed range 9 - 1800 U/min︱power requirement 22 kW︱3-jaw-chuck diameter 400 mm︱quick change toolholder MULTIFIX Typ C︱taper in tailstock-quill MK 6 ︱dia. of quill 100 mm︱quill stroke 280 mm︱coolant ︱voltage 400 V︱total power requirement 22 kW︱weight of the machine ca. 6,5 t︱
          - Serial-No.: 01192-01-808 - NEW Bearings on Main Spindle - Main gearbox rebuilt, all gear shaft bearings renewed - guide ways of cross slide grinded and scraped - rapid traverse for Z, Z0 and X-Axis - autom. feed in top support - 3-jaw Chuck, wedge type SMW Ø 400 mm - 3-axis digital readout Heidenhain - quick change tool holder MULTIFIX - fixed steady rest - coolant equipment - machine lamp
            turning diameter over bed 640 mm
            turning diameter over slide rest 385 mm
            turning length 3000 mm
            center height over bed 315 mm
            centre distance 3000 mm
            digital readout 3-Achsen HEIDENHAIN
            bed width 450 mm
            spindle taper KK 8 DIN 55022
            spindle bore 82 mm
            turning speed range 9 - 1800 U/min
            power requirement 22 kW
            3-jaw-chuck diameter 400 mm
            quick change toolholder MULTIFIX Typ C
            taper in tailstock-quill MK 6
            dia. of quill 100 mm
            quill stroke 280 mm
            voltage 400 V
            total power requirement 22 kW
            weight of the machine ca. 6,5 t
            Description :
            - Serial-No.: 01192-01-808
            - NEW Bearings on Main Spindle
            - Main gearbox rebuilt,
            all gear shaft bearings renewed
            - guide ways of cross slide grinded and scraped
            - rapid traverse for Z, Z0 and X-Axis
            - autom. feed in top support
            - 3-jaw Chuck, wedge type SMW Ø 400 mm
            - 3-axis digital readout Heidenhain
            - quick change tool holder MULTIFIX
            - fixed steady rest
            - coolant equipment
            - machine lamp


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 420 linear/CNC-Heidenhain


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20344 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 420 linear/CNC-Heidenhain - - 2004 - Data Pilot 4290 HEIDENHAIN

          Technical details
          turning diameter 324 mm︱turning length 600 mm︱control Data Pilot 4290 HEIDENHAIN︱bar diameter 65 mm︱swing diameter 680 mm︱travel -x axis 260 mm︱travel -z axis 635 mm︱spindle speed: 5000 1/min︱spindle bore 79 mm︱C-Axis 0,025 °︱turret head 12 Pos. / VDI 40︱Driven Tools 12 Pos. 4.500 U/min︱rapid traverse X-axis 60 m/min︱rapid traverse Z-axis 45 m/min︱taper in tailstock-quill MK 5 ︱tailstock travel 580 mm︱drive capacity - spindle motor 25 kW︱voltage 400 V︱total power requirement 50 kVA︱weight of the machine ca. 6,0 t︱
          - Serial-No.: 02260003251 - Machine ON: 19.039 h - Programm ON: 2.676 h - control: HEIDENHAIN Data Pilot 4290 - New main spindle bearings - Z-Axis ball screw reconditioned incl. new bearings - electronic hand wheel - C-Axis / driven tools - chip conveyor - coolant equipment - machine lamp
            turning diameter 324 mm
            turning length 600 mm
            control Data Pilot 4290 HEIDENHAIN
            bar diameter 65 mm
            swing diameter 680 mm
            travel -x axis 260 mm
            travel -z axis 635 mm
            spindle speed: 5000 1/min
            spindle bore 79 mm
            C-Axis 0,025 °
            turret head 12 Pos. / VDI 40
            Driven Tools 12 Pos. 4.500 U/min
            rapid traverse X-axis 60 m/min
            rapid traverse Z-axis 45 m/min
            taper in tailstock-quill MK 5
            tailstock travel 580 mm
            drive capacity - spindle motor 25 kW
            voltage 400 V
            total power requirement 50 kVA
            weight of the machine ca. 6,0 t
            Description :
            - Serial-No.: 02260003251
            - Machine ON: 19.039 h
            - Programm ON: 2.676 h
            - control: HEIDENHAIN Data Pilot 4290
            - New main spindle bearings
            - Z-Axis ball screw reconditioned incl. new bearings
            - electronic hand wheel
            - C-Axis / driven tools
            - chip conveyor
            - coolant equipment
            - machine lamp


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 420 linear V3 - Siem. 840D


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20346 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 420 linear V3 - Siem. 840D - - 2003 - SINUMERIK 840D ShopTurn

          Technical details
          turning diameter 324 mm︱turning length 600 mm︱control SINUMERIK 840D ShopTurn︱swing diameter 680 mm︱bar diameter 65 mm︱travel -x axis 260 mm︱travel -z axis 635 mm︱spindle speed: 5000 1/min︱spindle bore 79 mm︱C-Axis 0,025 °︱turret head 12 Pos. / VDI 40︱Driven Tools 12 Pos. 4.500 U/min︱rapid traverse X-axis 60 m/min︱rapid traverse Z-axis 45 m/min︱taper in tailstock-quill MK 5 ︱tailstock travel 580 mm︱drive capacity - spindle motor 25 kW︱voltage 400 V︱total power requirement 50 kVA︱weight of the machine ca. 6,0 t︱
          - Serial-No.: 02260001561 - Machine ON: 64.692 h - Programm ON: 18.296 h - control: SIEMENS 840D ShopTurn - electronic hand wheel - C-Axis / driven tools - Spindle bearings NEW - Ball screw Z-Axis incl. bearings NEW - chip conveyor - coolant equipment - machine lamp
            turning diameter 324 mm
            turning length 600 mm
            control SINUMERIK 840D ShopTurn
            swing diameter 680 mm
            bar diameter 65 mm
            travel -x axis 260 mm
            travel -z axis 635 mm
            spindle speed: 5000 1/min
            spindle bore 79 mm
            C-Axis 0,025 °
            turret head 12 Pos. / VDI 40
            Driven Tools 12 Pos. 4.500 U/min
            rapid traverse X-axis 60 m/min
            rapid traverse Z-axis 45 m/min
            taper in tailstock-quill MK 5
            tailstock travel 580 mm
            drive capacity - spindle motor 25 kW
            voltage 400 V
            total power requirement 50 kVA
            weight of the machine ca. 6,0 t
            Description :
            - Serial-No.: 02260001561
            - Machine ON: 64.692 h
            - Programm ON: 18.296 h
            - control: SIEMENS 840D ShopTurn
            - electronic hand wheel
            - C-Axis / driven tools
            - Spindle bearings NEW
            - Ball screw Z-Axis incl. bearings NEW
            - chip conveyor
            - coolant equipment
            - machine lamp


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled WAGNER WDE 500


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20401 · Lathe - cycle-controlled

          WAGNER - WDE 500 - - 2010 - Sinumerik

          Technical details
          centre height 250 mm︱centre distance 1500 mm︱turning diameter over bed 500 mm︱turning diameter over slide 280 mm︱turning length 1500 mm︱spindle taper D8 ︱control Sinumerik ︱bed width 390 mm︱spindle bore 82 mm︱turning speed range 45-2000 U/min︱rapid travel - longitudinal/face 8/4 m/min︱3-jaw-chuck diameter 250 mm︱quick change toolholder System Multifix ︱drive capacity - spindle motor 6,5 kW︱taper in tailstock-quill MK 5 ︱dia. of quill 75 mm︱quill stroke 150 mm︱coolant 3,0 ︱voltage 400 V︱total power requirement 24 kVA︱
          - Serial-No. G01262 - Control: Sinumerik 802 C
            centre height 250 mm
            centre distance 1500 mm
            turning diameter over bed 500 mm
            turning diameter over slide 280 mm
            turning length 1500 mm
            spindle taper D8
            control Sinumerik
            bed width 390 mm
            spindle bore 82 mm
            turning speed range 45-2000 U/min
            rapid travel - longitudinal/face 8/4 m/min
            3-jaw-chuck diameter 250 mm
            quick change toolholder System Multifix
            drive capacity - spindle motor 6,5 kW
            taper in tailstock-quill MK 5
            dia. of quill 75 mm
            quill stroke 150 mm
            coolant 3,0
            voltage 400 V
            total power requirement 24 kVA
            Description :
            - Serial-No. G01262
            - Control: Sinumerik 802 C


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 5 - 1000 / SIEMENS


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20337 · Lathe - cycle-controlled

          MONFORTS - KNC 5 - 1000 / SIEMENS - - 1999 - Sinumerik 810 D SIEMENS

          Technical details
          centre height 255 mm︱centre distance 1080 mm︱turning diameter over bed 500 mm︱turning diameter over slide 290 mm︱turning length 1000 mm︱spindle taper KK 8 DIN 55027︱control Sinumerik 810 D SIEMENS︱bed width 360 mm︱spindle bore 70 mm︱turning speed range 2 - 2800 U/min︱rapid travel - longitudinal/face 10 / 5 m/min︱quick change toolholder MULTIFIX Typ B / CAPTO︱drive capacity - spindle motor 11,0 kW︱taper in tailstock-quill MK 5 ︱dia. of quill 80 mm︱quill stroke 160 mm︱coolant ︱voltage 400 V︱total power requirement 16,0 kVA︱weight of the machine ca. 3,0 t︱
          - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp
            centre height 255 mm
            centre distance 1080 mm
            turning diameter over bed 500 mm
            turning diameter over slide 290 mm
            turning length 1000 mm
            spindle taper KK 8 DIN 55027
            control Sinumerik 810 D SIEMENS
            bed width 360 mm
            spindle bore 70 mm
            turning speed range 2 - 2800 U/min
            rapid travel - longitudinal/face 10 / 5 m/min
            quick change toolholder MULTIFIX Typ B / CAPTO
            drive capacity - spindle motor 11,0 kW
            taper in tailstock-quill MK 5
            dia. of quill 80 mm
            quill stroke 160 mm
            voltage 400 V
            total power requirement 16,0 kVA
            weight of the machine ca. 3,0 t
            Description :
            - Serial-No.: 346 / 03
            - control: SIEMENS Sinumerik 810 D
            - quick change tool holder MULTIFIX
            - coolant equipment
            - machine lamp


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact

          Mechanician s Lathe

          used Lathes Mechanician s Lathe WEILER


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-19236 · Mechanician s Lathe

          WEILER - - - -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 110 mm︱turning length 350 mm︱center height over bed 125 mm︱centre distance 350 mm︱bed width 170 mm︱spindle bore 24 mm︱turning speed range 440 - 3600 U/min︱voltage 380 V︱weight of the machine ca. 350 kg︱dimensions of the machine ca. 1,25 x 0,55 x 1,25 m︱
          - revolver 5-fold - Collet equipment
            turning diameter over bed 250 mm
            turning diameter over slide rest 110 mm
            turning length 350 mm
            center height over bed 125 mm
            centre distance 350 mm
            bed width 170 mm
            spindle bore 24 mm
            turning speed range 440 - 3600 U/min
            voltage 380 V
            weight of the machine ca. 350 kg
            dimensions of the machine ca. 1,25 x 0,55 x 1,25 m
            Description :
            - revolver 5-fold
            - Collet equipment


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.