,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Machines available immediately

          Machinelist: Machines available immediately


          Band Saw - Automatic

          used Machines available immediately Band Saw - Automatic AMADA HFA 530 CNC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03778 · Band Saw - Automatic

          AMADA - HFA 530 CNC - - 2008 - CNC

          Technical details
          cutting diameter 530 mm︱saw band length 6670 mm︱cutting width 530 mm︱Control CNC ︱main drive motor 7,5 kW︱roll guideway optional ︱total power requirement 13 kW︱weight of the machine ca. 6,3 t︱dimensions of the machine ca. m︱
          Fully automatic band saw roller conveyor Dimensions: 4000x700
            cutting diameter 530 mm
            saw band length 6670 mm
            cutting width 530 mm
            Control CNC
            main drive motor 7,5 kW
            roll guideway optional
            total power requirement 13 kW
            weight of the machine ca. 6,3 t
            Description :
            Fully automatic band saw roller conveyor Dimensions: 4000x700


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact

          Band Saw - Automatic - Horizontal

          used Machines available immediately Band Saw - Automatic - Horizontal AMADA A 250


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-037456 · Band Saw - Automatic - Horizontal

          AMADA - A 250 - - 1999 -

          Technical details
          cutting diameter 250 mm︱saw band length 3470 mm︱cutting width mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          FREE FOR SALE 1 X AMADA A 250 NICE MACHINE FULL AUTOMATIC
            cutting diameter 250 mm
            saw band length 3470 mm
            Description :
            FREE FOR SALE
            1 X AMADA A 250
            NICE MACHINE FULL AUTOMATIC


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact

          turret punch press

          used Machines available immediately turret punch press Amada Europe 258


          • PTF GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 93 622 83
            +49 7574 92 17 24
          • info@ptf-maschinen.de
            www.ptf-maschinen.de
          #2054-3179 · turret punch press

          Amada - Europe 258 - - 2001 -

          Technical details
          Working hours machine 36101 h︱Control Fanuc 18-P ︱Length 6190 mm︱Width 5000 mm︱Machine weight 12000 kg︱
            
            Working hours machine 36101 h
            Control Fanuc 18-P
            Length 6190 mm
            Width 5000 mm
            Machine weight 12000 kg
            Description :
              


        • PTF GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Machines available immediately Hydr. pressbrake AMADA HFE  M2 1703


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96921 · Hydr. pressbrake

          AMADA - HFE M2 1703 - - 2011 -

          Technical details
          pressure 170 t︱chamfer lenght 3170 mm︱distance between columns mm︱stroke 200 mm︱table width 180 mm︱work height max. 960 mm︱Control ︱total power requirement kW︱weight of the machine ca. 11,60 t︱dimensions of the machine ca. m︱
          • controlled axes: Y1, Y2, X, R, Z1, Z2 • 2 support arms can be moved • Fissler safety laser light barrier • Very large tool package consisting of: Sub tools V35 / 30° length = 3200mm V20/V14 length = 3x835mm V25 length = 4x835mm + 1x415mm V40 length = 835,835,620,420,150,50mm V8/V12. Length = 835, 800, 600, 250mm V20/30° length = 4 x 835mm Adapter 60mm > slot 13 length = 3 x 1040mm Upper tools Straight H130, R 1.5 length = 3300mm Heavily offset H 200, R 0.8 length = 2800mm, segmented Slightly offset H70, R 0.8 length = 3100mm, segmented Slightly offset H70, R 5.0 length = 2920mm Slightly offset H70, R 3.0 length = 3500mm And much more !
            pressure 170 t
            chamfer lenght 3170 mm
            stroke 200 mm
            table width 180 mm
            work height max. 960 mm
            weight of the machine ca. 11,60 t
            Description :
            • controlled axes: Y1, Y2, X, R, Z1, Z2
            • 2 support arms can be moved
            • Fissler safety laser light barrier
            • Very large tool package consisting of:
            Sub tools
            V35 / 30° length = 3200mm
            V20/V14 length = 3x835mm
            V25 length = 4x835mm + 1x415mm
            V40 length = 835,835,620,420,150,50mm
            V8/V12. Length = 835, 800, 600, 250mm
            V20/30° length = 4 x 835mm
            Adapter 60mm > slot 13 length = 3 x 1040mm
            Upper tools
            Straight H130, R 1.5 length = 3300mm
            Heavily offset H 200, R 0.8 length = 2800mm, segmented
            Slightly offset H70, R 0.8 length = 3100mm, segmented
            Slightly offset H70, R 5.0 length = 2920mm
            Slightly offset H70, R 3.0 length = 3500mm
            And much more !


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake AMADA Astro 100 NT HDS-1030


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7037 · Hydr. pressbrake

          AMADA - Astro 100 NT HDS-1030 - - 2004 - AMADA AMNC II-PC

          Technical details
          pressure 100 t︱chamfer lenght 3000 mm︱distance between columns 2700 mm︱Control AMADA AMNC II-PC ︱throat 415 mm︱stroke 200 mm︱dayligth 500 mm︱adjustment of the rear stops 600 mm︱table width 60 mm︱number of controlled axis 7 ︱ajustment speed 200 mm/sec︱bending speed 20 mm/sec︱total power requirement 5,3 kW︱weight of the machine ca. 6,7 t︱dimensions of the machine ca. m︱
          Includes: -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm -Status indicator light -5-axis backgauge with stop sensor system Folding robot: ASTRO-100 NT Includes: -Standard gripper -Reposition gripper on the upper press beam -Regripping support for large workpieces - pneumatically driven Technical data see PDF attachment. Handling robot: ASTRO-MP20 Includes: -Loading table with spreading magnets -Vacuum gripper "Medium" and "Large" -Combi gripper (suction/gripping) for vertical loading -Device for vertical loading of up to 120 parts Technical data see PDF attachment. Operating hours: 73000 h Miscellaneous: -Installation briefing of the entire cell -Safety equipment according to CE: safety fences with electrically interlocked doors -Transformer for the entire cell -External software AP-100 and ASTRO-CAM -DELL PC -Wila punch clamping (New Standard Clamping I) incl. hydraulic unit -2.loading station for parts up to max. 500x500mm -Side stop for loading table, manually adjustable -2500mm floor travelling track for the ASTRO-MP 20 handling robot -CCD camera system for checking the position of the blank -Conveyor belt 4000x700mm, height 750mm for finished parts -Modification of the safety device - integration of the conveyor belt and glass Glass instead of fence on the front of the system -PC for external programming -4 x grippers: IG 0725, ZG 0725, IF 0725, TF 3025 Machine is in very good condition. The technical data has been compiled to the best of our knowledge, for which we cannot accept any liability.
            pressure 100 t
            chamfer lenght 3000 mm
            distance between columns 2700 mm
            Control AMADA AMNC II-PC
            throat 415 mm
            stroke 200 mm
            dayligth 500 mm
            adjustment of the rear stops 600 mm
            table width 60 mm
            number of controlled axis 7
            ajustment speed 200 mm/sec
            bending speed 20 mm/sec
            total power requirement 5,3 kW
            weight of the machine ca. 6,7 t
            Description :
            Includes:
            -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm
            -Status indicator light
            -5-axis backgauge with stop sensor system

            Folding robot: ASTRO-100 NT
            Includes:
            -Standard gripper
            -Reposition gripper on the upper press beam
            -Regripping support for large workpieces - pneumatically driven
            Technical data see PDF attachment.

            Handling robot: ASTRO-MP20
            Includes:
            -Loading table with spreading magnets
            -Vacuum gripper "Medium" and "Large"
            -Combi gripper (suction/gripping) for vertical loading
            -Device for vertical loading of up to 120 parts
            Technical data see PDF attachment.

            Operating hours: 73000 h

            Miscellaneous:
            -Installation briefing of the entire cell
            -Safety equipment according to CE: safety fences with electrically interlocked
            doors
            -Transformer for the entire cell
            -External software AP-100 and ASTRO-CAM
            -DELL PC
            -Wila punch clamping (New Standard Clamping I) incl. hydraulic unit
            -2.loading station for parts up to max. 500x500mm
            -Side stop for loading table, manually adjustable
            -2500mm floor travelling track for the ASTRO-MP 20 handling robot
            -CCD camera system for checking the position of the blank
            -Conveyor belt 4000x700mm, height 750mm for finished parts
            -Modification of the safety device - integration of the conveyor belt and glass
            Glass instead of fence on the front of the system
            -PC for external programming
            -4 x grippers: IG 0725, ZG 0725, IF 0725, TF 3025

            Machine is in very good condition.

            The technical data has been compiled to the best of our knowledge,
            for which we cannot accept any liability.




        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake AMADA HFE 100.3


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308373 · Hydr. pressbrake

          AMADA - HFE 100.3 - - 2002 -

          Technical details
          pressure 100 t︱chamfer lenght 3140 mm︱distance between columns 2700 mm︱column arm 420 mm︱dayligth 470 mm︱stroke 200 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱table width 60.0 mm︱table height 960 mm︱oil volume 150 L︱0 300 bar︱controlled axis 8 Anzahl︱Number of working hours 47.800 h︱total power requirement 12.5 KW︱weight of the machine ca. 7150 kg︱range L-W-H 4295 x 2285 x 2635 mm︱
          ** maintained condition (!!) ** with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left * Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) * Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) * Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308373
            pressure 100 t
            chamfer lenght 3140 mm
            distance between columns 2700 mm
            column arm 420 mm
            dayligth 470 mm
            stroke 200 mm
            ajustment speed 100 mm/sec
            working feed 10.0 mm/sec
            return speed 100 mm/sec
            table width 60.0 mm
            table height 960 mm
            oil volume 150 L
            0 300 bar
            controlled axis 8 Anzahl
            Number of working hours 47.800 h
            total power requirement 12.5 KW
            weight of the machine ca. 7150 kg
            range L-W-H 4295 x 2285 x 2635 mm
            Description :
            ** maintained condition (!!)
            ** with approx. 47.800 operating hours

            Furnishing:
            - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
            * swiveling operation - front left
            * Tool & program library
            - CNC-controlled back gauge adjustment (X1+X2 axis)
            * Adjustment range .. 700 mm
            - CNC-controlled vertical adjustment of the stop fingers (R1+R2)
            * Adjustment range .. 250 mm
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - Hand control device for manual movement of the axes
            - AMADA manual upper tool clamping system
            - 1x freely movable foot switch
            - side protection device (pivoting doors)
            - rear protection device (pivoting door)
            - EMERGENCY stop button at the front
            - CE marking
            - original instruction manual

            * Special accessories included:
            - 1x brand new ROLLERI upper tool set (divided)
            * TYPE PS.135.85.R08
            - 1x brand new ROLLERI lower tool set (divided)
            * TYPE M.460.R

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308373


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake AMADA HFE 100.3


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96935 · Hydr. pressbrake

          AMADA - HFE 100.3 - - 2002 -

          Technical details
          pressure 100 t︱chamfer lenght 3140 mm︱distance between columns 2700 mm︱column arm 420 mm︱dayligth 470 mm︱stroke 200 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱table width 60.0 mm︱table height 960 mm︱oil volume 150 L︱0 300 bar︱controlled axis 8 Anzahl︱Number of working hours 47.800 h︱total power requirement 12.5 KW︱weight of the machine ca. 7150 kg︱range L-W-H 4295 x 2285 x 2635 mm︱
          ** maintained condition (!!) ** with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left * Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) * Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) * Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R
            pressure 100 t
            chamfer lenght 3140 mm
            distance between columns 2700 mm
            column arm 420 mm
            dayligth 470 mm
            stroke 200 mm
            ajustment speed 100 mm/sec
            working feed 10.0 mm/sec
            return speed 100 mm/sec
            table width 60.0 mm
            table height 960 mm
            oil volume 150 L
            0 300 bar
            controlled axis 8 Anzahl
            Number of working hours 47.800 h
            total power requirement 12.5 KW
            weight of the machine ca. 7150 kg
            range L-W-H 4295 x 2285 x 2635 mm
            Description :
            ** maintained condition (!!)
            ** with approx. 47.800 operating hours

            Furnishing:
            - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
            * swiveling operation - front left
            * Tool & program library
            - CNC-controlled back gauge adjustment (X1+X2 axis)
            * Adjustment range .. 700 mm
            - CNC-controlled vertical adjustment of the stop fingers (R1+R2)
            * Adjustment range .. 250 mm
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - Hand control device for manual movement of the axes
            - AMADA manual upper tool clamping system
            - 1x freely movable foot switch
            - side protection device (pivoting doors)
            - rear protection device (pivoting door)
            - EMERGENCY stop button at the front
            - CE marking
            - original instruction manual

            * Special accessories included:
            - 1x brand new ROLLERI upper tool set (divided)
            * TYPE PS.135.85.R08
            - 1x brand new ROLLERI lower tool set (divided)
            * TYPE M.460.R



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake AMADA HFE 50-20


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308383 · Hydr. pressbrake

          AMADA - HFE 50-20 - - 2000 -

          Technical details
          pressure 50.0 t︱chamfer lenght 2090 mm︱distance between columns 1665 mm︱column arm 400 mm︱table width 60,0 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱stroke 200 mm︱table height 910 mm︱dayligth 470 mm︱Number of working hours 27.900 h︱total power requirement 6.0 KW︱weight of the machine ca. 4850 kg︱range L-W-H 3458 x 2450 x 2450 mm︱
          ** maintained condition (!!) ** with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) * incl. SICK safety device - light barrier - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308383 * Machinevideo : https://www.youtube.com/watch?v=lzJmJ7FbpO4
            pressure 50.0 t
            chamfer lenght 2090 mm
            distance between columns 1665 mm
            column arm 400 mm
            table width 60,0 mm
            ajustment speed 100 mm/sec
            working feed 10.0 mm/sec
            return speed 100 mm/sec
            stroke 200 mm
            table height 910 mm
            dayligth 470 mm
            Number of working hours 27.900 h
            total power requirement 6.0 KW
            weight of the machine ca. 4850 kg
            range L-W-H 3458 x 2450 x 2450 mm
            Description :
            ** maintained condition (!!)
            ** with only approx. 27.900 operating hours

            Furnishing:
            - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
            * swiveling operation - front left
            - CNC-controlled back gauge adjustment (X1+X2)
            - CNC-controlled vertical adjustment of the stop fingers (R1+R2)
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - Hand control device for manual movement of the axes
            - AMADA manual upper tool clamping system
            - 1x freely movable foot switch
            - side protection device (pivoting doors)
            * incl. SICK safety device - light barrier
            - rear protection device (pivoting door)
            - EMERGENCY stop button at the front
            - CE marking
            - original instruction manual

            * Special accessories included:
            - 1x brand new ROLLERI upper tool set (divided)
            * TYPE PS.135.85.R08
            - 1x brand new ROLLERI lower tool set (divided)
            * TYPE M.460.R

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308383

            * Machinevideo :
            https://www.youtube.com/watch?v=lzJmJ7FbpO4


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake AMADA HFE 50-20


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96934 · Hydr. pressbrake

          AMADA - HFE 50-20 - - 2000 -

          Technical details
          pressure 050 t︱chamfer lenght 2090 mm︱distance between columns 1665 mm︱column arm 400 mm︱table width 60,0 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱stroke 200 mm︱table height 910 mm︱dayligth 470 mm︱Number of working hours 27.900 h︱total power requirement 6.0 KW︱weight of the machine ca. 4850 kg︱range L-W-H 3458 x 2450 x 2450 mm︱
          ** maintained condition (!!) ** with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) * incl. SICK safety device - light barrier - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R
            pressure 050 t
            chamfer lenght 2090 mm
            distance between columns 1665 mm
            column arm 400 mm
            table width 60,0 mm
            ajustment speed 100 mm/sec
            working feed 10.0 mm/sec
            return speed 100 mm/sec
            stroke 200 mm
            table height 910 mm
            dayligth 470 mm
            Number of working hours 27.900 h
            total power requirement 6.0 KW
            weight of the machine ca. 4850 kg
            range L-W-H 3458 x 2450 x 2450 mm
            Description :
            ** maintained condition (!!)
            ** with only approx. 27.900 operating hours

            Furnishing:
            - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
            * swiveling operation - front left
            - CNC-controlled back gauge adjustment (X1+X2)
            - CNC-controlled vertical adjustment of the stop fingers (R1+R2)
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - Hand control device for manual movement of the axes
            - AMADA manual upper tool clamping system
            - 1x freely movable foot switch
            - side protection device (pivoting doors)
            * incl. SICK safety device - light barrier
            - rear protection device (pivoting door)
            - EMERGENCY stop button at the front
            - CE marking
            - original instruction manual

            * Special accessories included:
            - 1x brand new ROLLERI upper tool set (divided)
            * TYPE PS.135.85.R08
            - 1x brand new ROLLERI lower tool set (divided)
            * TYPE M.460.R



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake Amada HFBO-2204


          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland

          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-0223349 · Hydr. pressbrake

          Amada - HFBO-2204 - - 1998 -

          Technical details
          pressure 220 t︱chamfer lenght 4050 mm︱distance between columns 3700 mm︱Stroke beam 200 mm︱ 470 mm︱ 350 mm︱Quick speed,inspeed 100 mm/sec︱bendingspeed 0-10 mm/sec︱opening speed 100 mm/sec︱ 600 mm︱R1 and R2 axis controlled by cnc 150 mm︱Z1+Z2 axes controlled by cnc 0-3700 mm︱Number of working hours 28500 h︱Dimensions of machine: ︱length 5500 mm︱width 2300 mm︱height 3000 mm︱weight 16000 kg︱Control ︱total power requirement 15 kW︱
            pressure 220 t
            chamfer lenght 4050 mm
            distance between columns 3700 mm
            Stroke beam 200 mm
            470 mm
            350 mm
            Quick speed,inspeed 100 mm/sec
            bendingspeed 0-10 mm/sec
            opening speed 100 mm/sec
            600 mm
            R1 and R2 axis controlled by cnc 150 mm
            Z1+Z2 axes controlled by cnc 0-3700 mm
            Number of working hours 28500 h
            length 5500 mm
            width 2300 mm
            height 3000 mm
            weight 16000 kg
            total power requirement 15 kW


        • B&R Service GmbH
        • Esslingerstr.8
        • 73776 Altbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake AMADA APX 80.25


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-165 · Hydr. pressbrake

          AMADA - APX 80.25 - - 1997 - operateur

          Technical details
          pressure 80 t︱chamfer lenght 2500 mm︱distance between columns 2050 mm︱Control operateur ︱Number of axles 7 St.︱total power requirement 7.5 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3x2.1x2.2 m︱
            pressure 80 t
            chamfer lenght 2500 mm
            distance between columns 2050 mm
            Control operateur
            Number of axles 7 St.
            total power requirement 7.5 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3x2.1x2.2 m


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake AMADA HFB 220-30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021153 · Hydr. pressbrake

          AMADA - HFB 220-30 - - 1991 -

          Technical details
          pressure 220 t︱chamfer lenght 3000 mm︱stroke max. 180 mm︱total power requirement 17 kW︱weight of the machine ca. 12.000 Kg︱dimensions 3660 x 2380 x 2800 mm︱
            pressure 220 t
            chamfer lenght 3000 mm
            stroke max. 180 mm
            total power requirement 17 kW
            weight of the machine ca. 12.000 Kg
            dimensions 3660 x 2380 x 2800 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake Amada IT 25-12


          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland

          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-0124368 · Hydr. pressbrake

          Amada - IT 25-12 - - 1991 - Cybelec DNC74

          Technical details
          pressure 25 t︱chamfer lenght 1250 mm︱distance between columns 1020 mm︱Stroke beam 100 mm︱ 370 mm︱ 100 mm︱Quick speed,inspeed 100 mm/sec︱bendingspeed 0-10 mm/sec︱opening speed 100 mm/sec︱X-axes 420 mm︱ 100 mm︱Number of working hours ca.30.000 h︱Dimensions of machine: ︱length mm︱width 1600 mm︱height 2000 mm︱weight 1500 kg︱Control Cybelec DNC74 ︱total power requirement 2,5 kW︱dimensions of the machine ca. 2x2x2 m︱
            pressure 25 t
            chamfer lenght 1250 mm
            distance between columns 1020 mm
            Stroke beam 100 mm
            370 mm
            100 mm
            Quick speed,inspeed 100 mm/sec
            bendingspeed 0-10 mm/sec
            opening speed 100 mm/sec
            X-axes 420 mm
            100 mm
            Number of working hours ca.30.000 h
            width 1600 mm
            height 2000 mm
            weight 1500 kg
            Control Cybelec DNC74
            total power requirement 2,5 kW
            dimensions of the machine ca. 2x2x2 m


        • B&R Service GmbH
        • Esslingerstr.8
        • 73776 Altbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake AMADA HFB 220


          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland

          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-1023362 · Hydr. pressbrake

          AMADA - HFB 220 - - 1991 -

          Technical details
          pressure 220 t︱chamfer lenght 4100 mm︱distance between columns 3850 mm︱Stroke beam 180 mm︱ 470 mm︱ 350 mm︱Quick speed,inspeed 100 mm/sec︱bendingspeed 0-10 mm/sec︱opening speed 100 mm/sec︱X-axes 600 mm︱R1 and R2 axis controlled by cnc 120 mm︱Dimensions of machine: ︱length 4500 mm︱width 2200 mm︱height 3100 mm︱weight 16500 kg︱Control ︱total power requirement 18 kW︱dimensions of the machine ca. 5x2,5x3,2 m︱
            pressure 220 t
            chamfer lenght 4100 mm
            distance between columns 3850 mm
            Stroke beam 180 mm
            470 mm
            350 mm
            Quick speed,inspeed 100 mm/sec
            bendingspeed 0-10 mm/sec
            opening speed 100 mm/sec
            X-axes 600 mm
            R1 and R2 axis controlled by cnc 120 mm
            length 4500 mm
            width 2200 mm
            height 3100 mm
            weight 16500 kg
            total power requirement 18 kW
            dimensions of the machine ca. 5x2,5x3,2 m


        • B&R Service GmbH
        • Esslingerstr.8
        • 73776 Altbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake Amada HFE 50-20


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100366 · Hydr. pressbrake

          Amada - HFE 50-20 - - -

          Technical details

            Description :





        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact

          Laser Cutting Machine

          used Machines available immediately Laser Cutting Machine Amada Ensis AJ 6kW


          • PTF GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 93 622 83
            +49 7574 92 17 24
          • info@ptf-maschinen.de
            www.ptf-maschinen.de
          #2054-3211 · Laser Cutting Machine

          Amada - Ensis AJ 6kW - - 2019 -

          Technical details
          Working hours machine 19744 (17.01.2024) h︱Working hours beam on 6018 (17.01.2024) h︱Laser power 6000 Watt︱Control AMNC 3i ︱Length 10136 mm︱Width 2840 mm︱Machine weight 9500 kg︱
            Working hours machine 19744 (17.01.2024) h
            Working hours beam on 6018 (17.01.2024) h
            Laser power 6000 Watt
            Control AMNC 3i
            Length 10136 mm
            Width 2840 mm
            Machine weight 9500 kg
            Description :


        • PTF GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Laser Cutting Machine AMADA FO-3015 NT II


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7032 · Laser Cutting Machine

          AMADA - FO-3015 NT II - - 2016 - AMNC Multi 3i Media

          Technical details
          table length 3.070 mm︱table width 1.550 mm︱table height 200 mm︱Control AMNC Multi 3i Media ︱laser capacity in Watt 4000 W︱material diameter structural steel 25 mm︱material diameter stainless steel 15 mm︱material diameter aluminium 12 mm︱total power requirement 72 kW︱weight of the machine ca. 9,5 + 12,7 t︱dimensions of the machine ca. 10,7 x 6,3 x 5,5 m︱
          AMNC Multi 3i media control 4000 Watt continuous laser power ASLUL 300 FO-MII loading tower 3-axis drive Cutting grid support AMADA/FANUC beam source Flying optics principle Adaptive optics WACS cutting area cooling Oil spraying device Cutting process monitoring incl. sensor cutting head incl. quick lens change system incl. quick-change nozzle system incl. 7.5" lens holder incl. 7.5" cutting lens incl. NC cutting gas pressure control incl. NC focus position control incl. Cleancut high-pressure cutting function incl. aluminium cutting function Alucut incl. travel protection according to CE incl. 8-fold nozzle changer TG 513 transformer Combi cooler - suction unit Jet path rinsing Laser water treatment kit Water demineraliser type B5 with cartridge and conductivity meter Silky-Cut option in stainless steel incl. 10" lens and holder 5.0" lens and lens holder BLANK Solution package - 1 licence AP100BM Unfold & 3D Modific. - Dr ABE BLANK + all technology modules - Production Designer - USB Dongle Operating hours: 59700 h
            table length 3.070 mm
            table width 1.550 mm
            table height 200 mm
            Control AMNC Multi 3i Media
            laser capacity in Watt 4000 W
            material diameter structural ste. 25 mm
            material diameter stainless stee. 15 mm
            material diameter aluminium 12 mm
            total power requirement 72 kW
            weight of the machine ca. 9,5 + 12,7 t
            dimensions of the machine ca. 10,7 x 6,3 x 5,5 m
            Description :
            AMNC Multi 3i media control
            4000 Watt continuous laser power
            ASLUL 300 FO-MII loading tower
            3-axis drive
            Cutting grid support
            AMADA/FANUC beam source
            Flying optics principle
            Adaptive optics
            WACS cutting area cooling
            Oil spraying device
            Cutting process monitoring
            incl. sensor cutting head
            incl. quick lens change system
            incl. quick-change nozzle system
            incl. 7.5" lens holder
            incl. 7.5" cutting lens
            incl. NC cutting gas pressure control
            incl. NC focus position control
            incl. Cleancut high-pressure cutting function
            incl. aluminium cutting function Alucut
            incl. travel protection according to CE
            incl. 8-fold nozzle changer
            TG 513 transformer
            Combi cooler - suction unit
            Jet path rinsing
            Laser water treatment kit
            Water demineraliser type B5 with cartridge and conductivity meter
            Silky-Cut option in stainless steel incl. 10" lens and holder
            5.0" lens and lens holder
            BLANK Solution package
            - 1 licence AP100BM Unfold & 3D Modific.
            - Dr ABE BLANK + all technology modules
            - Production Designer
            - USB Dongle
            Operating hours: 59700 h


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Laser Cutting Machine AMADA LCG3015


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92350 · Laser Cutting Machine

          AMADA - LCG3015 - - 2014 - AMNC-F

          Technical details
          laser capacity in Watt 3500 ︱travel -x axis 3070 mm︱travel -y axis 1550 mm︱Control AMNC-F ︱table load capacity 920 KG︱material length max. 3050 mm︱material width max. 1525 mm︱total power requirement 30 kW︱weight of the machine ca. 8,2 t︱dimensions of the machine ca. 10,00 x 2,90 x 2,20 m︱
            laser capacity in Watt 3500
            travel -x axis 3070 mm
            travel -y axis 1550 mm
            Control AMNC-F
            table load capacity 920 KG
            material length max. 3050 mm
            material width max. 1525 mm
            total power requirement 30 kW
            weight of the machine ca. 8,2 t
            dimensions of the machine ca. 10,00 x 2,90 x 2,20 m


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Laser Cutting Machine AMADA LC 2415 AIIII


          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland

          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-1223367 · Laser Cutting Machine

          AMADA - LC 2415 AIIII - - 2008 - AMNC-F

          Technical details
          table length 2550(5040) mm︱table width 1550 mm︱burner heads 1 ︱axis stroke (X,Y,Z) 2520(5040)x1550x300 mm︱laser capacity in Watt 4000 watt︱control AMNC-F ︱Number of working hours 42000 h︱Steel sheet steel 12 mm︱Thickness V2A 8 mm︱Thickness Alu 6 mm︱Cutting speed X/Y/Z 80/80/60 m/min︱max. table load 330 kg︱Laser gas consumption L/h︱Dimensions of machine: ︱length 6000 mm︱width 2600 mm︱height 2300 mm︱weight 7,7 t︱Power connection 69 kVA︱
            table length 2550(5040) mm
            table width 1550 mm
            burner heads 1
            axis stroke (X,Y,Z) 2520(5040)x1550x300 mm
            laser capacity in Watt 4000 watt
            control AMNC-F
            Number of working hours 42000 h
            Steel sheet steel 12 mm
            Thickness V2A 8 mm
            Thickness Alu 6 mm
            Cutting speed X/Y/Z 80/80/60 m/min
            max. table load 330 kg
            length 6000 mm
            width 2600 mm
            height 2300 mm
            weight 7,7 t
            Power connection 69 kVA


        • B&R Service GmbH
        • Esslingerstr.8
        • 73776 Altbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Laser Cutting Machine AMADA Quattro


          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland

          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-0621309 · Laser Cutting Machine

          AMADA - Quattro - - 2004 - Fanuc

          Technical details
          table length 1250 mm︱table width 1250 mm︱burner heads 1 ︱Control Fanuc ︱output 1000 Watt︱travel -z axis 100 mm︱travel x / y 1260/1260 mm︱traversing speed 30/30/42 mm/sec︱gas consuption 10 Liter/Std.︱total power requirement 22 kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 10 m︱
            table length 1250 mm
            table width 1250 mm
            burner heads 1
            Control Fanuc
            output 1000 Watt
            travel -z axis 100 mm
            travel x / y 1260/1260 mm
            traversing speed 30/30/42 mm/sec
            gas consuption 10 Liter/Std.
            total power requirement 22 kW
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 10 m


        • B&R Service GmbH
        • Esslingerstr.8
        • 73776 Altbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Laser Cutting Machine AMADA Alpha Laser 2415 III


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92300 · Laser Cutting Machine

          AMADA - Alpha Laser 2415 III - - 2003 -

          Technical details
          table length 5040 mm︱table width 1550 mm︱ 12 mm︱plate weight max. 330 kg︱travel -x axis 2520 mm︱travel -z axis 300 mm︱travel -y axis 1550 mm︱cutting speed 20 m/min︱feed speed X/Y/Z 80/80/60 m/min︱positioning accuracy +-0,01 mm/500 mm mm︱repeatability +/- 0,005 mm︱table height 820 mm︱size of opening 550x1550 mm︱compressed air 6/20 bar︱total power requirement 10 kW︱weight of the machine ca. ca. 6,5 t︱dimensions of the machine ca. 2,5x5,7x2,3 m︱
            table length 5040 mm
            table width 1550 mm
            12 mm
            plate weight max. 330 kg
            travel -x axis 2520 mm
            travel -z axis 300 mm
            travel -y axis 1550 mm
            cutting speed 20 m/min
            feed speed X/Y/Z 80/80/60 m/min
            positioning accuracy +-0,01 mm/500 mm mm
            repeatability +/- 0,005 mm
            table height 820 mm
            size of opening 550x1550 mm
            compressed air 6/20 bar
            total power requirement 10 kW
            weight of the machine ca. ca. 6,5 t
            dimensions of the machine ca. 2,5x5,7x2,3 m


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact

          Laser Punching Machine

          used Machines available immediately Laser Punching Machine Amada ACIES 2515T


          • PTF GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 93 622 83
            +49 7574 92 17 24
          • info@ptf-maschinen.de
            www.ptf-maschinen.de
          #2054-3212 · Laser Punching Machine

          Amada - ACIES 2515T - - 2015 -

          Technical details
          Working hours machine 31888 (17.01.2024) h︱Working hours beam on 6475 (17.01.2024) h︱Laser power 4000 Watt︱Control AMNC 3i ︱Length 7870 mm︱Width 5880 mm︱x-axis 100 m / min︱y-axis 80 m / min︱Weight of machine approx. 30000 kg︱
            Working hours machine 31888 (17.01.2024) h
            Working hours beam on 6475 (17.01.2024) h
            Laser power 4000 Watt
            Control AMNC 3i
            Length 7870 mm
            Width 5880 mm
            x-axis 100 m / min
            y-axis 80 m / min
            Weight of machine approx. 30000 kg


        • PTF GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Laser Punching Machine Amada EML 3610


          • PTF GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 93 622 83
            +49 7574 92 17 24
          • info@ptf-maschinen.de
            www.ptf-maschinen.de
          #2054-3209 · Laser Punching Machine

          Amada - EML 3610 - - 2006 -

          Technical details
          Working hours machine 61.000 h︱Laser power 4000 Watt︱Control AMNC-F ︱Length 6354 mm︱Width 5880 mm︱Machine weight 30000 kg︱x-axis 100 m / min︱y-axis 80 m / min︱
            Working hours machine 61.000 h
            Laser power 4000 Watt
            Control AMNC-F
            Length 6354 mm
            Width 5880 mm
            Machine weight 30000 kg
            x-axis 100 m / min
            y-axis 80 m / min


        • PTF GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Machines available immediately Plate Shear - Hydraulic AMADA GPX 630


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325317 · Plate Shear - Hydraulic

          AMADA - GPX 630 - - 1995 - AMADA

          Technical details
          sheet width 3050 mm︱plate thickness 6,35 mm︱thickness at "Niro-steel" 4,0 mm︱down holder 16 Stück︱table length 575 mm︱Control AMADA ︱cutting angle 40° - 2°20 °︱0 305 bar︱oil volume 100 ltr.︱total power requirement 5,5 kW︱weight of the machine ca. 6150 kg︱range L-W-H 3790 x 2090 x 1860 mm︱
          ** maintained condition (!!) Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line * Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind the machine - 1x freely movable foot switch - Clippings waste container - original instruction manual ** Special accessories: - AMADA electro-pneumatic sheet metal holding device for thin sheet metal blanks
            sheet width 3050 mm
            plate thickness 6,35 mm
            thickness at "Niro-steel" 4,0 mm
            down holder 16 Stück
            table length 575 mm
            Control AMADA
            cutting angle 40° - 2°20 °
            0 305 bar
            oil volume 100 ltr.
            total power requirement 5,5 kW
            weight of the machine ca. 6150 kg
            range L-W-H 3790 x 2090 x 1860 mm
            Description :
            ** maintained condition (!!)

            Furnishing:
            - AMADA NC control, swiveling control panel at the front left
            - Electric back stop, NC controlled
            - electrical/hydraulic cutting angle adjustment
            - electrical/hydraulic cutting gap adjustment
            - Sighting device & cutting line lighting to view the scribe line
            * Shear cutting after visual outline
            - 1x long side stop
            - 1x long support arms
            - Safety device behind the machine
            - 1x freely movable foot switch
            - Clippings waste container
            - original instruction manual

            ** Special accessories:
            - AMADA electro-pneumatic sheet metal holding device for thin sheet metal blanks


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          TOP Manufacturer: