,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          SCHMITT REINHOLD GMBH Maschinen und Anlagen für BÄNDER - Stockist for used machines

          Machinelist:


          Roll Grinder

          used  Roll Grinder HERKULES WS 180


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0909 · Roll Grinder

          HERKULES - WS 180 - - 1987 -

          Technical details
          Center Height 180 mm︱Grinding Diameter 375/325 mm︱Grinding Length 1750 mm︱Grinding Length mm︱Workpiece Weight 0,75 t︱Dimension of Grinding Wheel 450x50x203 mm︱Required Space app. 5,5x4,0 m︱Machine Weight app. 10,70 t︱
          in accordance to the technical description pos. 09.09
            Center Height 180 mm
            Grinding Diameter 375/325 mm
            Grinding Length 1750 mm
            Workpiece Weight 0,75 t
            Dimension of Grinding Wheel 450x50x203 mm
            Required Space app. 5,5x4,0 m
            Machine Weight app. 10,70 t
            Description :
            in accordance to the technical description pos. 09.09
          Datasheet
          Request / Contact

          Coil lifting carriage

          used  Coil lifting carriage RTK 8221


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0762 · Coil lifting carriage

          RTK - 8221 - - 2007 -

          Technical details
          Capacity 3,00 t︱Dimension - Prism - Support (L x W) 770x740 mm︱Required Space app. 2,90x1,45x2,25 m︱Machine Weight app. t︱
          COIL TRANSFER CAR - over floor technical details: capacity 3,0 to. construction prism dimension – prism (support surface – l x w) 770 x 740 mm coil outside – diameter max. 2.000 mm dimension – lower edge wheel - upper edge – prism-support surface 280 mm axle base (middle - middle wheel) 1.300 mm wheel base (outer edge wheel / wheel) 1.300 mm required space (l x w x h) 2.900 x 1.450 x 2.250 mm weight kg accessories: coil-transfer car – movable motor driven (by chain), power 3,0 kW driving speed app. 4,5 m/min. press arm hydraulically hydraulic unit mounted at frame construction, power 2,2 kW control box / control unit mounted at frame construction cable drum (cable refeeding) mounted at frame construction
            Capacity 3,00 t
            Dimension - Prism - Support (L x. 770x740 mm
            Required Space app. 2,90x1,45x2,25 m
            Description :
            COIL TRANSFER CAR - over floor

            technical details:
            capacity 3,0 to.
            construction prism
            dimension – prism (support surface – l x w) 770 x 740 mm
            coil outside – diameter max. 2.000 mm
            dimension – lower edge wheel - upper edge – prism-support surface 280 mm
            axle base (middle - middle wheel) 1.300 mm
            wheel base (outer edge wheel / wheel) 1.300 mm
            required space (l x w x h) 2.900 x 1.450 x 2.250 mm
            weight kg

            accessories:
            coil-transfer car – movable motor driven (by chain), power 3,0 kW
            driving speed app. 4,5 m/min.
            press arm hydraulically
            hydraulic unit mounted at frame construction, power 2,2 kW
            control box / control unit mounted at frame construction
            cable drum (cable refeeding) mounted at frame construction
          Datasheet
          Request / Contact
          used  Coil lifting carriage NN


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-07582 · Coil lifting carriage

          NN - - - -

          Technical details
          Capacity 3,50 t︱Dimension - Prism - Support (L x W) 530 x 775 mm︱Required Space app. 1,44x1,25x1,58 m︱Machine Weight app. 1,92 t︱
          COIL CAR (L-design) - over floor design (construction) prism / counter-plate dimension – prism (support area – L x B) 530 x 775 mm dimension – counter-plate (h x w) 950 x 800 mm prism – lifting / lowering hydraulically lifting height 400 mm dimension – under edge wheel - prism support area 145 mm axle-base 1.000 mm wheel-base (outer edge wheel / wheel) 1100 mm accessories: coil car – movable motor driven (via chain) power 1,5 / 2,2 kW prism equipped with holes for coil-protection segments (rod) no. – coil-protection segments (rod) 2 pc. hydraulic – unit mounted on frame construction control box mounted on frame construction control unit mounted on frame construction
            Capacity 3,50 t
            Dimension - Prism - Support (L x. 530 x 775 mm
            Required Space app. 1,44x1,25x1,58 m
            Machine Weight app. 1,92 t
            Description :
            COIL CAR (L-design) - over floor

            design (construction) prism / counter-plate
            dimension – prism (support area – L x B) 530 x 775 mm
            dimension – counter-plate (h x w) 950 x 800 mm
            prism – lifting / lowering hydraulically
            lifting height 400 mm
            dimension – under edge wheel - prism support area 145 mm
            axle-base 1.000 mm
            wheel-base (outer edge wheel / wheel) 1100 mm

            accessories:
            coil car – movable motor driven (via chain) power 1,5 / 2,2 kW
            prism equipped with holes for coil-protection segments (rod)
            no. – coil-protection segments (rod) 2 pc.
            hydraulic – unit mounted on frame construction
            control box mounted on frame construction
            control unit mounted on frame construction
          Datasheet
          Request / Contact

          COIL OPENER- DRIVER

          used  COIL OPENER- DRIVER RDB


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-01998 · COIL OPENER- DRIVER

          RDB - - - 1989 -

          Technical details
          passage width 1.850 mm︱Power 7,9 KW︱required space app. 4,2 x 0,93 x 1,58 m︱machine weight app. 3,0 t︱
          INFEED DRIVER UNIT working direction previously left - right material dimensionen previously 1.650 x 0,50 – 3,00 mm roll – arrangement 1 x above / 1 x below no. – driver rolls (infeed rolls) 2 driver rolls (infeed rolls) motor driven, power 7,9 kW driver rolls (infeed rolls) – width 1.750 mm driver rolls (infeed rolls) – diameter 180 mm lower driver roll (infeed roll) pneumatically adjustable coating – driver rolls (infeed rolls) FEBO-PREN infeed-driver-unit consisting of: driver unit mounted on frame construction feeding roll unit (strip feeding) 2 x (1 x infeed side/1 x run out side) adjustment – feeding roll unit (strip feeding) motor driven conveyor rolls 2 x (1 x infeed side/1 x run out side) roll width 1.770 mm roll – diameter 111 mm
            passage width 1.850 mm
            Power 7,9 KW
            required space app. 4,2 x 0,93 x 1,58 m
            machine weight app. 3,0 t
            Description :
            INFEED DRIVER UNIT

            working direction previously left - right
            material dimensionen previously 1.650 x 0,50 – 3,00 mm

            roll – arrangement 1 x above / 1 x below
            no. – driver rolls (infeed rolls) 2
            driver rolls (infeed rolls) motor driven, power 7,9 kW
            driver rolls (infeed rolls) – width 1.750 mm
            driver rolls (infeed rolls) – diameter 180 mm
            lower driver roll (infeed roll) pneumatically adjustable
            coating – driver rolls (infeed rolls) FEBO-PREN

            infeed-driver-unit consisting of:
            driver unit mounted on frame construction
            feeding roll unit (strip feeding) 2 x (1 x infeed side/1 x run out side)
            adjustment – feeding roll unit (strip feeding) motor driven
            conveyor rolls 2 x (1 x infeed side/1 x run out side)
            roll width 1.770 mm
            roll – diameter 111 mm


          Datasheet
          Request / Contact

          Cut-to-length-lines

          used  Cut-to-length-lines VIGANO/RIVA


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056810 · Cut-to-length-lines

          VIGANO/RIVA - - - 2000/2001 -

          Technical details
          Material Width 2.000 mm︱Material Thickness 1,50 - (5,00)6,00 mm︱Coil Weight max. 30,0 t︱Coil Inside Diameter 580 mm︱Coil Outside Diameter 1.250/1.500 mm︱
          sheet length 580 - 6.000 mm working direction left - right otherwise according to technical specification 05.68-1.0
            Material Width 2.000 mm
            Material Thickness 1,50 - (5,00)6,00 mm
            Coil Weight max. 30,0 t
            Coil Inside Diameter 580 mm
            Coil Outside Diameter 1.250/1.500 mm
            Description :
            sheet length 580 - 6.000 mm
            working direction left - right

            otherwise according to technical specification 05.68-1.0
          Datasheet
          Request / Contact
          used  Cut-to-length-lines WILHELMSBURGER


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056410 · Cut-to-length-lines

          WILHELMSBURGER - - - 1975 -

          Technical details
          Material Width 1.800 mm︱Material Thickness 0,50-1,50 mm︱Coil Weight 30,0 t︱Required Space app. m︱Machine Weight app. t︱
          length tolerance ± 0,5 mm width tolerance ± 0,5 mm diagonal tolerance ± 1,0 mm line consisting of: double side decoiler leveler no. of leveling rolls 21 leveling roll diameter 35 mm flying shear magnetic conveyor table - length 10 m 2 output tables electric pneumatic hydraulic
            Material Width 1.800 mm
            Material Thickness 0,50-1,50 mm
            Coil Weight 30,0 t
            Description :
            length tolerance ± 0,5 mm
            width tolerance ± 0,5 mm
            diagonal tolerance ± 1,0 mm

            line consisting of:
            double side decoiler
            leveler
            no. of leveling rolls 21
            leveling roll diameter 35 mm
            flying shear
            magnetic conveyor table - length 10 m
            2 output tables
            electric
            pneumatic
            hydraulic
          Datasheet
          Request / Contact

          Cut-to-Length-Shear

          used  Cut-to-Length-Shear FIMI 1205


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05987 · Cut-to-Length-Shear

          FIMI - 1205 - - 2002 -

          Technical details
          Material Width 1250 mm︱Material Thickness 0,20-0,80 mm︱Blade Length 1300 mm︱Tensile Strength 500 N/mm²︱Speed 120 m/min︱Required Space app. m︱Machine Weight app. 10,33 t︱
          construction CUTTING SHEAR (DRUM SHEAR - rotary shear) infeed driving unit (driven) with measuring unit no. – infeed rolls (coating – rubberized) 2 adjustment – upper roll pneumatically adjustment – measuring roll (upper) pneumatically power (SIEMENS) 3,15 kW main motor unit 3-phase-current-motor, manufacturer Ansoldo Sistemi Industriali type SN 250 P4, power 83 kW circular lubrication system electric system manufacturer DIGITEC hydraulic unit spare parts 2 pc. blades – NEW, manufacturer NEUENKAMP
            Material Width 1250 mm
            Material Thickness 0,20-0,80 mm
            Blade Length 1300 mm
            Tensile Strength 500 N/mm²
            Speed 120 m/min
            Machine Weight app. 10,33 t
            Description :
            construction CUTTING SHEAR (DRUM SHEAR - rotary shear)

            infeed driving unit (driven) with measuring unit
            no. – infeed rolls (coating – rubberized) 2
            adjustment – upper roll pneumatically
            adjustment – measuring roll (upper) pneumatically
            power (SIEMENS) 3,15 kW
            main motor unit 3-phase-current-motor, manufacturer Ansoldo Sistemi Industriali
            type SN 250 P4, power 83 kW
            circular lubrication system
            electric system manufacturer DIGITEC
            hydraulic unit
            spare parts 2 pc. blades – NEW, manufacturer NEUENKAMP
          Datasheet
          Request / Contact
          used  Cut-to-Length-Shear HEILBRONN QTSH 3/1600


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-059840 · Cut-to-Length-Shear

          HEILBRONN - QTSH 3/1600 - - 1989 -

          Technical details
          Material Width 1.600 mm︱Material Thickness 0,50 - 3,00 mm︱Required Space app. m︱Machine Weight app. t︱
          execution: FLYING SHEAR power 11 kW working direction (previously) left - right consisting of: - conveyor table - mounted - band feeding unit at infeed side - accelerator belt at run out side - automatic clearance adjustment
            Material Width 1.600 mm
            Material Thickness 0,50 - 3,00 mm
            Description :
            execution: FLYING SHEAR

            power 11 kW
            working direction (previously) left - right

            consisting of:
            - conveyor table - mounted
            - band feeding unit at infeed side
            - accelerator belt at run out side
            - automatic clearance adjustment
          Datasheet
          Request / Contact
          used  Cut-to-Length-Shear RDB


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05984 · Cut-to-Length-Shear

          RDB - - - 1989 -

          Technical details
          Material Width 1650 mm︱Material Thickness 0,50-3,00 mm︱Blade Length 1770 mm︱Tensile Strength 450/750 N/mm²︱Speed 50 m/min︱Required Space app. m︱Machine Weight app. 6,60 t︱
          construction HEAVY DUTY – CUTTING SHEAR (hydraulically) no. of strokes / tensile strength max. 60 strokes / 450 Nmm² no. of strokes / tensile strength max. 30 strokes / 750 Nmm² cutting speed / tensile strength 0,25 sec. / 450 Nmm² cutting speed / tensile strength 0,50 sec. / 750 Nmm² working direction (previously) left- right accessories: cutting process high dynamic special cylinder and toggle lever blade construction 2 x transverse grinded plastic reinforced deflector (infeed side) automatic adjustable hold-down device pressure adjustable kerf adjustment mechanically conveyor table (upwards of the lower blade) mounted heavy duty – hydraulic unit manufacturer MANNESMANN REXROTH, power 75 kW dimension (l x w x h) / weight: cutting shear 3.600 x 1.150 x 2.200 mm 4.270 kg hydraulic unit 2.150 x 1.900 x 2.100 mm 2.285 kg
            Material Width 1650 mm
            Material Thickness 0,50-3,00 mm
            Blade Length 1770 mm
            Tensile Strength 450/750 N/mm²
            Speed 50 m/min
            Machine Weight app. 6,60 t
            Description :
            construction HEAVY DUTY – CUTTING SHEAR (hydraulically)

            no. of strokes / tensile strength max. 60 strokes / 450 Nmm²
            no. of strokes / tensile strength max. 30 strokes / 750 Nmm²
            cutting speed / tensile strength 0,25 sec. / 450 Nmm²
            cutting speed / tensile strength 0,50 sec. / 750 Nmm²
            working direction (previously) left- right

            accessories:
            cutting process high dynamic special cylinder and toggle lever
            blade construction 2 x transverse grinded
            plastic reinforced deflector (infeed side)
            automatic adjustable hold-down device pressure adjustable
            kerf adjustment mechanically
            conveyor table (upwards of the lower blade) mounted
            heavy duty – hydraulic unit manufacturer MANNESMANN REXROTH, power 75 kW

            dimension (l x w x h) / weight:
            cutting shear 3.600 x 1.150 x 2.200 mm 4.270 kg
            hydraulic unit 2.150 x 1.900 x 2.100 mm 2.285 kg
          Datasheet
          Request / Contact

          Decoilers for Coils

          used  Decoilers for Coils GERMANY ABH 1,0/400


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0107 · Decoilers for Coils

          GERMANY - ABH 1,0/400 - - 2023 -

          Technical details
          coil weight 1,00 t︱material width 340 mm︱coil internal dia. 265-565 mm︱machine weight app. 0,25 t︱required space app. 1,40x1,20x1,80 m︱
          construction: support segment – system no. - support segments 3 length – suppert segments 400 mm working direction left-right / right-left counter ring – Ø 1.600 mm shaft – Ø 70 mm height floor - middle of shaft 840 mm accessories: construction - pedestal construction - rectangular tube positioned under decoiler construction, to proceed the relocation by forklift or similar expanding process manually by bevel gear wheel brake system disc brake brake caliper pneumatically, manufacturer TWIFLEX counter ring 2 pc. option: decoiler equipped with shifting frame (by linear guiding)
            coil weight 1,00 t
            material width 340 mm
            coil internal dia. 265-565 mm
            machine weight app. 0,25 t
            required space app. 1,40x1,20x1,80 m
            Description :
            construction: support segment – system

            no. - support segments 3
            length – suppert segments 400 mm
            working direction left-right / right-left
            counter ring – Ø 1.600 mm
            shaft – Ø 70 mm
            height floor - middle of shaft 840 mm

            accessories:
            construction - pedestal construction - rectangular tube positioned under
            decoiler construction, to proceed the relocation by forklift or similar
            expanding process manually by bevel gear wheel
            brake system disc brake
            brake caliper pneumatically, manufacturer TWIFLEX
            counter ring 2 pc.

            option:
            decoiler equipped with shifting frame (by linear guiding)
          Datasheet
          Request / Contact
          used  Decoilers for Coils ARKU AH 3000-400-MSG-4Q


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-01090 · Decoilers for Coils

          ARKU - AH 3000-400-MSG-4Q - - 1997 -

          Technical details
          coil weight 3,00 t︱material width 600 mm︱coil internal dia. 465-530 mm︱machine weight app. 2,45 t︱required space app. 2,72x1,70x2,40 m︱
          material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available
            coil weight 3,00 t
            material width 600 mm
            coil internal dia. 465-530 mm
            machine weight app. 2,45 t
            required space app. 2,72x1,70x2,40 m
            Description :
            material width (previously) 400 mm
            mandrel length 630 (655) mm
            mandrel – Ø (expanding range) 465 – 530 mm
            height floor - middle of mandrel 1.450 mm
            height upper edge decoiler construction - middle of mandrel 1.050 mm
            working direction (previously) right - left

            accessories:
            construction 3-segment-construction
            decoiler movable on base frame hydraulically
            press arm hydraulically
            press roll not driven
            expanding process mechanically
            decoiler motor driven (via chain) power 3,0 kW
            no. – limiting arms 6
            dimension – limiting arms (l x h) 410 x 180 mm
            valve components mounted at decoiler construction
            control unit (breaker unit) with cable

            hydraulic unit not available
          Datasheet
          Request / Contact
          used  Decoilers for Coils SCHLEICHER HE-100-500


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0109 · Decoilers for Coils

          SCHLEICHER - HE-100-500 - - 1988 -

          Technical details
          coil weight 3,00 t︱material width 500 mm︱coil internal dia. 370-510 mm︱machine weight app. 0,54 t︱required space app. 1,25x1,08x1,67 m︱
          material width (previously) 300 mm mandrel length 500 (510) mm mandrel – Ø (expandig range) 370 – 410 mm dto. with segments 470 – 510 mm height floor - middle of mandrel 1.050 mm height upper edge decoiler construction - middle of mandrel 860 mm accessories: construction 3-segment-construction expanding process mechanically no. – limiting arms 5 dimension – limiting arms (l x h) 400 x 60 mm brake unit mechanically (via star grip) no. – segments 9
            coil weight 3,00 t
            material width 500 mm
            coil internal dia. 370-510 mm
            machine weight app. 0,54 t
            required space app. 1,25x1,08x1,67 m
            Description :
            material width (previously) 300 mm
            mandrel length 500 (510) mm
            mandrel – Ø (expandig range) 370 – 410 mm
            dto. with segments 470 – 510 mm
            height floor - middle of mandrel 1.050 mm
            height upper edge decoiler construction - middle of mandrel 860 mm

            accessories:
            construction 3-segment-construction
            expanding process mechanically
            no. – limiting arms 5
            dimension – limiting arms (l x h) 400 x 60 mm
            brake unit mechanically (via star grip)
            no. – segments 9
          Datasheet
          Request / Contact
          used  Decoilers for Coils HEILBRONN HAEMH 5000/1600


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0138 · Decoilers for Coils

          HEILBRONN - HAEMH 5000/1600 - - 1986 -

          Technical details
          Coil Weight 5,0 t︱Mandrel Length 1.600 mm︱Mandrel Diameter 508 mm︱coil outside diameter 1.400 mm︱Height Floor up to Middle of Mandrel 1.220 mm︱Required Space app. 8,0 x 2,5 x 2,2 m︱Machine Weight app. 8,10 t︱
          DECOILER (with coil lifting unit) expanding range 460 - 530 mm working direction (previously) left - right otherwise according to technical specification 01.38
            Coil Weight 5,0 t
            Mandrel Length 1.600 mm
            Mandrel Diameter 508 mm
            coil outside diameter 1.400 mm
            Height Floor up to Middle of Man. 1.220 mm
            Required Space app. 8,0 x 2,5 x 2,2 m
            Machine Weight app. 8,10 t
            Description :
            DECOILER (with coil lifting unit)

            expanding range 460 - 530 mm
            working direction (previously) left - right

            otherwise according to technical specification 01.38

          Datasheet
          Request / Contact
          used  Decoilers for Coils PSM HH5000/6504


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-01584 · Decoilers for Coils

          PSM - HH5000/6504 - - 1983 -

          Technical details
          Coil Weight 5,0 t︱Mandrel Length 650 mm︱Mandrel Diameter 400/508 mm︱coil diameter ca./app. 1.720 mm︱Height Floor - Middle of Mandrel app. 850 mm︱speed app. 100 m/min︱Machine Weight app. t︱Required Space app. m︱
          power 20 kW accessories: expanding process - hydraulically type of brake - motor driven press arm press roll paper winder decoiler - movable working direction right - left hydraulic
            Coil Weight 5,0 t
            Mandrel Length 650 mm
            Mandrel Diameter 400/508 mm
            coil diameter ca./app. 1.720 mm
            Height Floor - Middle of Mandrel. 850 mm
            speed app. 100 m/min
            Description :
            power 20 kW

            accessories:
            expanding process - hydraulically
            type of brake - motor driven
            press arm
            press roll
            paper winder
            decoiler - movable

            working direction right - left

            hydraulic
          Datasheet
          Request / Contact
          used  Decoilers for Coils UNGERER HSSHy 1600/490/5,5


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-01583 · Decoilers for Coils

          UNGERER - HSSHy 1600/490/5,5 - - 1982/überh./rev.2006 -

          Technical details
          Coil Weight 5,5 t︱Mandrel Length 1.600 (1.780) mm︱coil inside diameter 508 mm︱clamping range 465 - 510 mm︱Height Floor - Middle of Mandrel app. 1.150 mm︱Machine Weight app. 5,5 t︱Required Space app. m︱
          accessories base frame expanding process - hydraulically press arm - hydraulically press roll - motor driven brake disc brake – hydraulically hydraulic unit not available dimensions (l x w x h): decoiler: app. 3.740 x 1.470 x 1.520 mm base frame: app. 1.760 x 960 x 600 mm
            Coil Weight 5,5 t
            Mandrel Length 1.600 (1.780) mm
            coil inside diameter 508 mm
            clamping range 465 - 510 mm
            Height Floor - Middle of Mandrel. 1.150 mm
            Machine Weight app. 5,5 t
            Description :
            accessories
            base frame
            expanding process - hydraulically
            press arm - hydraulically
            press roll - motor driven
            brake disc brake – hydraulically

            hydraulic unit not available

            dimensions (l x w x h):
            decoiler: app. 3.740 x 1.470 x 1.520 mm
            base frame: app. 1.760 x 960 x 600 mm
          Datasheet
          Request / Contact
          used  Decoilers for Coils TILGERT


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0167 · Decoilers for Coils

          TILGERT - - - 1976 -

          Technical details
          Coil Weight 20,0 t︱Mandrel Length 1770/1850 mm︱Mandrel Diameter 508 mm︱Required Space app. 5,00x1,55x1,55 m︱Machine Weight app. t︱
          dimension – machine corpus (without mandrel) l x w 2.500 x 1.450 mm working direction – previously right - left working speed – previously 100 / 200 m/min. accessories: expanding process hydraulically gear box manufacturer KESTERMANN, power 80 kW / speed N1 = 370 2 x counter plate (movement – base plate) 1 x cylinder tube – new (expanding) circular lubrication kind of brake system disc brake brake disc available brake caliper 1 x available / 1 x not available motor not available (power previously 65 kW) base plate not available press arm not available hydraulic unit not available
            Coil Weight 20,0 t
            Mandrel Length 1770/1850 mm
            Mandrel Diameter 508 mm
            Required Space app. 5,00x1,55x1,55 m
            Description :
            dimension – machine corpus (without mandrel) l x w 2.500 x 1.450 mm
            working direction – previously right - left
            working speed – previously 100 / 200 m/min.

            accessories:
            expanding process hydraulically
            gear box manufacturer KESTERMANN, power 80 kW / speed N1 = 370
            2 x counter plate (movement – base plate)
            1 x cylinder tube – new (expanding)
            circular lubrication
            kind of brake system disc brake
            brake disc available
            brake caliper 1 x available / 1 x not available
            motor not available (power previously 65 kW)
            base plate not available
            press arm not available
            hydraulic unit not available


          Datasheet
          Request / Contact
          used  Decoilers for Coils HILLE


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-01085 · Decoilers for Coils

          HILLE - - - -

          Technical details
          coil weight 2,00 t︱material width 500 mm︱coil internal dia. 355-420 mm︱machine weight app. 0,93 t︱required space app. 2,0x0,95x1,75 m︱
          accessories: construction 4-segment-construction expanding process hydraulically expanding process tested (function flawless) disc brake unit manually (by stargrip) hydraulic unit mounted at decoiler construction hand valve mounted (via tubes) at decoiler construction U-profile mounted under decoiler construction (for mobile operation of the decoiler) height floor - middle of mandrel 900 mm
            coil weight 2,00 t
            material width 500 mm
            coil internal dia. 355-420 mm
            machine weight app. 0,93 t
            required space app. 2,0x0,95x1,75 m
            Description :
            accessories:
            construction 4-segment-construction
            expanding process hydraulically
            expanding process tested (function flawless)
            disc brake unit manually (by stargrip)
            hydraulic unit mounted at decoiler construction
            hand valve mounted (via tubes) at decoiler construction
            U-profile mounted under decoiler construction
            (for mobile operation of the decoiler)
            height floor - middle of mandrel 900 mm



          Datasheet
          Request / Contact
          used  Decoilers for Coils BAUHAMMER


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-01073 · Decoilers for Coils

          BAUHAMMER - - - -

          Technical details
          coil weight 1,00 t︱material width 400 mm︱coil internal dia. 345-415 mm︱machine weight app. x t︱required space app. x m︱
          height floor - middle of mandrel 800 mm accessories: construction - 3-segment-construction expanding process manually brake system - disc brake manually (hand wheel)
            coil weight 1,00 t
            material width 400 mm
            coil internal dia. 345-415 mm
            machine weight app. x t
            required space app. x m
            Description :
            height floor - middle of mandrel 800 mm

            accessories:
            construction - 3-segment-construction
            expanding process manually
            brake system - disc brake manually (hand wheel)
          Datasheet
          Request / Contact
          used  Decoilers for Coils NN


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-01074 · Decoilers for Coils

          NN - - - -

          Technical details
          coil weight 2,50 t︱material width 180 mm︱coil internal dia. 465-635 mm︱machine weight app. x t︱required space app. x m︱
          expanding range 465 – 535 mm dto. with segments 565 – 635 mm height floor - middle of mandrel 995 mm accessories: decoiler mounted on frame construction construction 4-segment-construcion expanding process hydraulically brake system disc brake – manually shaft equipped with chain wheel - preparation for motor unit counter plate hydraulic unit not available
            coil weight 2,50 t
            material width 180 mm
            coil internal dia. 465-635 mm
            machine weight app. x t
            required space app. x m
            Description :
            expanding range 465 – 535 mm
            dto. with segments 565 – 635 mm
            height floor - middle of mandrel 995 mm

            accessories:
            decoiler mounted on frame construction
            construction 4-segment-construcion
            expanding process hydraulically
            brake system disc brake – manually
            shaft equipped with chain wheel - preparation for motor unit
            counter plate

            hydraulic unit not available
          Datasheet
          Request / Contact

          Double side trimming shear

          used  Double side trimming shear FIMI


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05801 · Double side trimming shear

          FIMI - - - -

          Technical details
          Material Thickness - 4,00 mm︱passage width 1.900 mm︱Shaft Diameter 150 mm︱Speed max. 30 m/min︱Required Space app. m︱Machine Weight app. t︱
          execution: TRIMMING SHEAR with CHOPPER trimming width 40 mm at 4 mm motor power shear: 22,6 kW motor power chopper: 5,5 kW accessories: spare blades
            Material Thickness - 4,00 mm
            passage width 1.900 mm
            Shaft Diameter 150 mm
            Speed max. 30 m/min
            Description :
            execution: TRIMMING SHEAR with CHOPPER

            trimming width 40 mm at 4 mm
            motor power shear: 22,6 kW
            motor power chopper: 5,5 kW

            accessories:
            spare blades
          Datasheet
          Request / Contact

          Paper Coiling Unit

          used  Paper Coiling Unit  PW 980/1010/68-73


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0210 · Paper Coiling Unit

          - PW 980/1010/68-73 - - 2023 -

          Technical details
          Expansion Range 68 - 73 mm︱Shaft Diameter 68 mm︱Expansion Length 980 mm︱Main Pipe Length 1.010 mm︱Total length 1.295 mm︱Height up to Middle of Shaft app. 400 mm︱Required Space app. 1,45x0,53x0,73 m︱Machine Weight app. 0,16 t︱
          paper coiling unit without motor optional: paper coiling unit motor driven optional: paper coiling unit with fender for motor max. capacity 40 kg
            Expansion Range 68 - 73 mm
            Shaft Diameter 68 mm
            Expansion Length 980 mm
            Main Pipe Length 1.010 mm
            Total length 1.295 mm
            Height up to Middle of Shaft app. 400 mm
            Required Space app. 1,45x0,53x0,73 m
            Machine Weight app. 0,16 t
            Description :
            paper coiling unit without motor

            optional:
            paper coiling unit motor driven
            optional:
            paper coiling unit with fender for motor

            max. capacity 40 kg
          Datasheet
          Request / Contact

          Recoilers for Coils

          used  Recoilers for Coils PSM AHG 3000/650


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-03361 · Recoilers for Coils

          PSM - AHG 3000/650 - - 1982/2001 -

          Technical details
          coil weight 6,0 t︱mandrel length 730/880 mm︱Mandrel Diameter 400 mm︱Height Floor - Middle of Mandrel app. 1000 mm︱speed app. 70 m/min︱required space app. 3,2x2,1x2,2 m︱machine weight app. 4,7 t︱
          previously working direction right - left previously processed material dimension 600 x 0,30 - 3,00 mm motor power 40 kW mandel diameter with segments 500 + 600 mm coil outside diameter 2.000 mm accessories: expanding process / clamping process - hydraulically separator arm / shifting plate - hydraulically diameter - shifting plate 2.000 mm brake system - disc brake - pneumatically hydraulic valves and hydraulic unit not available tools for separator arm not available
            coil weight 6,0 t
            mandrel length 730/880 mm
            Mandrel Diameter 400 mm
            Height Floor - Middle of Mandrel. 1000 mm
            speed app. 70 m/min
            required space app. 3,2x2,1x2,2 m
            machine weight app. 4,7 t
            Description :
            previously working direction right - left
            previously processed material dimension 600 x 0,30 - 3,00 mm
            motor power 40 kW
            mandel diameter with segments 500 + 600 mm
            coil outside diameter 2.000 mm

            accessories:
            expanding process / clamping process - hydraulically
            separator arm / shifting plate - hydraulically
            diameter - shifting plate 2.000 mm
            brake system - disc brake - pneumatically

            hydraulic valves and hydraulic unit not available
            tools for separator arm not available
          Datasheet
          Request / Contact

          Rewinding Line

          used  Rewinding Line RDB / PELMA


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-2505 · Rewinding Line

          RDB / PELMA - - - überarb./rev. 2006 -

          Technical details
          material width 500 - 1.550 mm︱material thickness 0,40 - 3,00 mm︱coil weight app. 16,0/6,0 t︱required space app. 15 x 6 m︱machine weight app. t︱
          working direction right - left speed 25 / 40 / 60 m/min. otherwise according to technical specification 25.05
            material width 500 - 1.550 mm
            material thickness 0,40 - 3,00 mm
            coil weight app. 16,0/6,0 t
            required space app. 15 x 6 m
            Description :
            working direction right - left
            speed 25 / 40 / 60 m/min.

            otherwise according to technical specification 25.05
          Datasheet
          Request / Contact

          Roll forming Lines

          used  Roll forming Lines GASPARINI


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-1089 · Roll forming Lines

          GASPARINI - - - 1992 -

          Technical details
          Coil Weight 2 x 5,0 t︱Material Width max. 250 mm︱Material Thickness max. 3,0 mm︱Required Space app. m︱Machine Weight app. t︱
          execution: TWIN4 DOUBLE HEAD ROLL FORMING LINE speed 30 m/min. working direction left - right otherwise according to technical specification 10.89
            Coil Weight 2 x 5,0 t
            Material Width max. 250 mm
            Material Thickness max. 3,0 mm
            Description :
            execution: TWIN4 DOUBLE HEAD ROLL FORMING LINE

            speed 30 m/min.
            working direction left - right

            otherwise according to technical specification 10.89
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Perfil del comerciante: Schmitt Reinhold GmbH
          Maschinen und anlagen für bander,
          Bleche, Rohre y perfil

          Contactar con el comerciante



            Schmitt Reinhold GmbH
          Maschinen und anlagen für bander,
          Bleche, Rohre y perfil

           Obernahmerstr. 74
            58119 - Hagen-Hohenlimburg
            Alemania
            + 49 (0) 2334 4847 "> + 49 (0) 2334 4847
            49 0 2334
            info@reinhold-schmitt.de
            www.reinhold-schmitt.de

          Perfil del comerciante

          Somos una empresa comercial establecida en 1969 y tenemos un espacio de almacenamiento de aproximadamente 3.200 m² y nuestro negocio es vender maquinaria usada y nueva para el procesamiento de metales.


          Nos ocupamos de la compra y venta de maquinaria usada y nueva, así como de las instalaciones de fabricación para la producción y manipulación de BOBINAS, LAMINAS, TUBOS y PERFILES de acero, acero inoxidable, cobre, latón y aluminio, por ejemplo MOLINOS DE LAMINACIÓN EN CALIENTE, LAVADORAS EN FRÍO, LÍNEAS DE CORTE, LÍNEAS DE CORTE A LONGITUD, DEBOBINADORA, RETROCESO, LÍNEAS DE SOLDADURA DE TUBOS, LÍNEAS DE PERFILADO, NIVELADORA, ENTRADIZADORA, PLANTAS DE RECOCIDO y DUREZA, así como componentes de la maquinaria mencionada.

          Si es necesario, gestionamos el proceso de desmontaje, carga, logística, importación, exportación y reensamblado de las instalaciones, así como la modernización o el cambio del modo de control. Le aseguramos en todo momento una colaboración profesional y calificada para satisfacer sus expectativas.


          Tenemos casi 50 años de experiencia en el negocio del comercio de maquinarias usadas y nuevas, así como instalaciones de fabricación para la producción y el manejo de bobinas, hojas de metal, tubos y perfiles.




          Contáctanos

          REINHOLD SCHMITT GMBH


          Personas de contacto:

            Roland Becker

            Holger Suberg

            Giovanna Isopp


            Obernahmerstrasse 74, D - 58119 Hagen (Alemania)

            02334 4847

            02334 4840

            info@reinhold-schmitt.de




          Schmitt Reinhold GmbH Maschinen Und Anlagen Für Bänder, Bleche, Rohre Und Profile 58119 - Hagen-Hohenlimburg Obernahmerstr. 74 Deutschland
          Schmitt Reinhold GmbH Maschinen Und Anlagen Für Bänder, Bleche, Rohre Und Profile

          Obernahmerstr. 74



          Contact Trader


            Schmitt Reinhold GmbH Maschinen Und Anlagen Für Bänder, Bleche, Rohre Und Profile
           Obernahmerstr. 74
            58119 - Hagen-Hohenlimburg
            Deutschland
            +49 (0)2334 4847
            +49 (0)2334 4840
            info@reinhold-schmitt.de
            www.reinhold-schmitt.de
            Contact person:

           




          Machine category


          Abwickelhaspel · Aufwickelhaspel · Besäumschere · Bundhubwagen · Bundöffner - Treiber · Drehkreuz · Duo - Walzwerk · Längsteilanlage · Motor · Papierwickler · Profilieranlage · Querteilanlage · Querteilschere · Richtmaschine · Schrottschneider · Umwickelanlage · Walzenschleifmaschine ·