,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Frech GmbH - Stockist for used machines

          Machinelist:


          Punching Press

          used  Punching Press PEDDINGHAUS HYDRAULIK 500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34177 · Punching Press

          PEDDINGHAUS - HYDRAULIK 500 - - -

          Technical details
          pressure 050 t︱punching cross-cut in cmm 31 in 12 mm︱stroke max. 32,0 mm︱column arm 510 mm︱work height max. 1070 mm︱stroke - stepless adjustable 10 - 32 mm︱no. of strokes max. 45 Hub/min︱oil volume 45,0 l︱total power requirement 4,0 kW︱weight of the machine ca. 1120 kg.︱range L-W-H 1118 x 650 x 1680 mm︱
          ** good condition (!!) ** from a maintenance workshop Furnishing: - hydraulic punch, with large overhang - Sheet metal wipers with wiper plates - stepless stroke adjustment - Various application tools - Die base - free-moving footswitch - Operation manual
            pressure 050 t
            punching cross-cut in cmm 31 in 12 mm
            stroke max. 32,0 mm
            column arm 510 mm
            work height max. 1070 mm
            stroke - stepless adjustable 10 - 32 mm
            no. of strokes max. 45 Hub/min
            oil volume 45,0 l
            total power requirement 4,0 kW
            weight of the machine ca. 1120 kg.
            range L-W-H 1118 x 650 x 1680 mm
            Description :
            ** good condition (!!)
            ** from a maintenance workshop

            Furnishing:
            - hydraulic punch, with large overhang
            - Sheet metal wipers with wiper plates
            - stepless stroke adjustment
            - Various application tools
            - Die base
            - free-moving footswitch
            - Operation manual
          Datasheet
          Request / Contact

          Coil Line

          used  Coil Line HS-AUTOMATION MS 4000 / MR 58


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60165 · Coil Line

          HS-AUTOMATION - MS 4000 / MR 58 - - 2009 -

          Technical details
          sheet width 0600 mm︱coil outside dia. 1500 mm︱weight max. in kg 4000 kg︱width of sheet max. ca. 3,60 mm︱sheet thickness - min. 0,80 mm︱diam. of the rolls ca. 80 mm︱nomb. of straightening rolls 7 ︱feed rolls 2 ︱speed 5-30 m/min︱range of expansion ca. 475-535 mm︱expansion hydraulisch ︱pinch roll hydraulisch ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Decoiler type MS 4000 - Hydraulic spreading - Hydraulic pressure roller from above - Swivel-in limit roller at the front, contact disc at the rear - Auxiliary drive - Reel movable - Coil lifting table Straightening machine type MR 58 Rollers hardened and ground. - Pneumatically ventilated feed roller - Straightening rollers adjustable as a block - Lateral belt guidance at the inlet - Hydraulic band insertion aid - Straightening head can be opened - Large roll basket and transfer table at the outlet - Ultrasonic transmitter for loop control - Swivel control panel - Control Siemens S7
            sheet width 0600 mm
            coil outside dia. 1500 mm
            weight max. in kg 4000 kg
            width of sheet max. ca. 3,60 mm
            sheet thickness - min. 0,80 mm
            diam. of the rolls ca. 80 mm
            nomb. of straightening rolls 7
            feed rolls 2
            speed 5-30 m/min
            range of expansion ca. 475-535 mm
            expansion hydraulisch
            pinch roll hydraulisch
            Description :
            Decoiler type MS 4000
            - Hydraulic spreading
            - Hydraulic pressure roller from above
            - Swivel-in limit roller at the front, contact disc at the rear
            - Auxiliary drive
            - Reel movable
            - Coil lifting table

            Straightening machine type MR 58

            Rollers hardened and ground.
            - Pneumatically ventilated feed roller
            - Straightening rollers adjustable as a block
            - Lateral belt guidance at the inlet
            - Hydraulic band insertion aid
            - Straightening head can be opened
            - Large roll basket and transfer table at the outlet
            - Ultrasonic transmitter for loop control
            - Swivel control panel
            - Control Siemens S7
          Datasheet
          Request / Contact
          used  Coil Line ARKU AH 3000/2/250/ST / RM 3025.4/2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60174 · Coil Line

          ARKU - AH 3000/2/250/ST / RM 3025.4/2 - - 2004 -

          Technical details
          sheet width 0250 mm︱coil outside dia. 1800 mm︱weight max. in kg 2 x 3000 kg︱ 3,80 mm︱ 470 - 530 mm︱ 2130 mm︱ 418,0 kW︱speed 20 m/min︱power capacity 18 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm
            sheet width 0250 mm
            coil outside dia. 1800 mm
            weight max. in kg 2 x 3000 kg
            3,80 mm
            470 - 530 mm
            21
            30 mm
            4
            18,0 kW
            speed 20 m/min
            power capacity 18 kW
            Description :
            Decoiler AH 3000/2/250/ST
            with continuously variable drive, hydraulic central spread,
            Automatic post-spreading system, hydraulic pressure device, hydraulic swivel,

            Straightening machine RM 3025.4/21
            with continuously variable drive, driven straightening rollers, manual
            Roller mill adjustment, quick-change device for the straightening rollers
            Belt loop control via ultrasound
            Material thickness / with material width 3.80 / 250 mm
            Material thickness / with material width 6.00 / 100 mm
          Datasheet
          Request / Contact
          used  Coil Line DREHER 1676D-FQ/2380 D-FPS


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60157 · Coil Line

          DREHER - 1676D-FQ/2380 D-FPS - - 1999/97/2012 Umbau -

          Technical details
          sheet width 0500 mm︱coil outside dia. 1400 mm︱weight max. in kg 4000 kg︱plate thickness 0,80 - 3,60 mm︱diam. of the rolls ca. 80 mm︱feed rolls 2 ︱nomb. of straightening rolls 7 ︱exit pinch rolls 2 ︱speed 5-30 m/min︱range of expansion ca. 445 - 530 mm︱expansion manuell ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket
            sheet width 0500 mm
            coil outside dia. 1400 mm
            weight max. in kg 4000 kg
            plate thickness 0,80 - 3,60 mm
            diam. of the rolls ca. 80 mm
            feed rolls 2
            nomb. of straightening rolls 7
            exit pinch rolls 2
            speed 5-30 m/min
            range of expansion ca. 445 - 530 mm
            expansion manuell
            Description :
            Control conversion to SIEMENS S7 in 2012

            - pneumatic pressure roller on the side
            - pneumatically ventilated feed roller
            - Straightening rollers manually adjustable
            - lateral belt guide at the inlet
            - Large roller basket at the outlet
            - Ultrasonic transmitter for loop control
            - Roller feed type 1125 D
            - Bandwidth max. 510 mm
            - Band thickness max. 6 mm with full width 5.50 mm
            - Roll diameter 125mm
            - Feed speed: max. 100 m/min.
            - pneumatically ventilated top roller
            - Lateral tape guide with digital display
            - Inlet roller basket
          Datasheet
          Request / Contact
          used  Coil Line KOHLER 30.400/9-2000.2H


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60167 · Coil Line

          KOHLER - 30.400/9-2000.2H - - 1995 -

          Technical details
          sheet width 0400 mm︱coil outside dia. 460 - 530 mm︱weight max. in kg 2 x 2000 kg︱plate thickness 0,40 - 3,00 mm︱coil outside - diam. ca. 1500 mm︱nomb. of straightening rolls 9 ︱diam. of the rolls ca. 30 mm︱speed 0-40 m/min︱total power requirement 15 kW︱weight of the machine ca. 5,20 t︱dimensions of the machine ca. m︱
          - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound
            sheet width 0400 mm
            coil outside dia. 460 - 530 mm
            weight max. in kg 2 x 2000 kg
            plate thickness 0,40 - 3,00 mm
            coil outside - diam. ca. 1500 mm
            nomb. of straightening rolls 9
            diam. of the rolls ca. 30 mm
            speed 0-40 m/min
            total power requirement 15 kW
            weight of the machine ca. 5,20 t
            Description :
            - straightening machine type KRE 30.400/9
            with infinitely variable drive, motoric adjustment of the roller cassette,
            rapid clamping device
            - double decoiler type 2000.2 H
            with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll
            - coil loop control via ultrasound
          Datasheet
          Request / Contact
          used  Coil Line COVEMA/SCHWABE VRMA32/96-MHM 2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60173 · Coil Line

          COVEMA/SCHWABE - VRMA32/96-MHM 2 - - 1994 -

          Technical details
          sheet width 0320 mm︱coil outside dia. 1650 mm︱weight max. in kg 2000 kg︱width of the decoiler 400 mm︱coil inside-diam. ca. 350 - 460 mm︱diam. of the rolls ca. 40 mm︱nomb. of straightening rolls 7 ︱sheet thickness - max. 2,00 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          COVEMA-SCHWABE belt system consisting of: Reel MHM 2 - hydraulic expansion (motor 1.5kW/1500 U) - hydraulic pressure roller - with drive Feed leveling machine VRMA 32/96 The straightening head can be opened using hydraulics Intermediate ventilation with operating instructions with control panel
            sheet width 0320 mm
            coil outside dia. 1650 mm
            weight max. in kg 2000 kg
            width of the decoiler 400 mm
            coil inside-diam. ca. 350 - 460 mm
            diam. of the rolls ca. 40 mm
            nomb. of straightening rolls 7
            sheet thickness - max. 2,00 mm
            Description :
            COVEMA-SCHWABE belt system consisting of:

            Reel MHM 2
            - hydraulic expansion (motor 1.5kW/1500 U)
            - hydraulic pressure roller
            - with drive

            Feed leveling machine VRMA 32/96

            The straightening head can be opened using hydraulics
            Intermediate ventilation

            with operating instructions
            with control panel
          Datasheet
          Request / Contact
          used  Coil Line KOHLER 18.260.19-1000.2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60163 · Coil Line

          KOHLER - 18.260.19-1000.2 - - 1991/2023CHECK -

          Technical details
          sheet width 0260 mm︱coil outside dia. 1200 mm︱weight max. in kg 2 x 1000 kg︱sheet thickness - max. 2,00 mm︱nomb. of straightening rolls 19 ︱diam. of the rolls ca. 18 mm︱speed 0-60 m/min︱run-in height 1200-1400 mm︱sheet thickness - min. 0,30 mm︱working direction left - right ja/yes ︱range of expansion ca. 360 - 430 + 460 - 530 mm︱total power requirement 13 kW︱weight of the machine ca. 2,50 t︱dimensions of the machine ca. 5,50 x 1,80 x 2,10 m︱
          - Speed control ultrasonic via belt loop - Digital measuring device - Motorized roller mill adjustment - Drive motor 8 kW - Hydraulic reel expansion - Pneumatic reel brake - Quick change device for the straightening rollers and support rollers - SIEMENS S5 control - Press inlet height 1200-1400 mm - Electrical plans in the control cabinet - Instruction manual available Dimensions: - Straightener with reel 3.00 x 1.80 x 2.10 m - Tape guide 1.50 x 0.50 x 1.40 m - Control cabinet 0.90 x 0.60 x 2.10 m The system is energized and can be tested with material.
            sheet width 0260 mm
            coil outside dia. 1200 mm
            weight max. in kg 2 x 1000 kg
            sheet thickness - max. 2,00 mm
            nomb. of straightening rolls 19
            diam. of the rolls ca. 18 mm
            speed 0-60 m/min
            run-in height 1200-1400 mm
            sheet thickness - min. 0,30 mm
            working direction left - right ja/yes
            range of expansion ca. 360 - 430 + 460 - 530 mm
            total power requirement 13 kW
            weight of the machine ca. 2,50 t
            dimensions of the machine ca. 5,50 x 1,80 x 2,10 m
            Description :
            - Speed control ultrasonic via belt loop
            - Digital measuring device
            - Motorized roller mill adjustment
            - Drive motor 8 kW
            - Hydraulic reel expansion
            - Pneumatic reel brake
            - Quick change device for the straightening rollers and support rollers
            - SIEMENS S5 control
            - Press inlet height 1200-1400 mm
            - Electrical plans in the control cabinet
            - Instruction manual available

            Dimensions:
            - Straightener with reel 3.00 x 1.80 x 2.10 m
            - Tape guide 1.50 x 0.50 x 1.40 m
            - Control cabinet 0.90 x 0.60 x 2.10 m

            The system is energized and can be tested with material.
          Datasheet
          Request / Contact
          used  Coil Line KOHLER 10 120 - 300.2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60159 · Coil Line

          KOHLER - 10 120 - 300.2 - - 1979 -

          Technical details
          sheet width 0120 mm︱coil outside dia. 1200 mm︱weight max. in kg 300 kg︱sheet thickness - max. 1,00 mm︱diam. of the rolls ca. 10 mm︱nomb. of straightening rolls 16 ︱ diameter of the mandrel 350 - 530 mm︱total power requirement 5,50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Manually adjustable hold-down roller at the inlet - Large roller basket with cover on the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank
            sheet width 0120 mm
            coil outside dia. 1200 mm
            weight max. in kg 300 kg
            sheet thickness - max. 1,00 mm
            diam. of the rolls ca. 10 mm
            nomb. of straightening rolls 16
            diameter of the mandrel 350 - 530 mm
            total power requirement 5,50 kW
            Description :
            - Reel and straightener as a combination with a common frame
            - Manually adjustable reel brake
            - Coil limiting ring at the front, fixed washer at the rear
            - Reel can be moved manually laterally
            - manual reel spreading
            - side belt – guide rollers with central adjustment at the inlet
            - manual block adjustment of the straightening mechanism, display via dial
            gauges
            - Oil - central lubrication
            - Loop control via sensor
            - Speed adjustable via potentiometer
            - Manually adjustable hold-down roller at the inlet
            - Large roller basket with cover on the outlet
            - Free-standing control panel
            - Lateral adjustment of the reel using a hand crank
          Datasheet
          Request / Contact
          used  Coil Line KOHLER 12 120 -150.2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60158 · Coil Line

          KOHLER - 12 120 -150.2 - - 1979 -

          Technical details
          sheet width 0120 mm︱coil outside dia. 800 mm︱weight max. in kg 150 kg︱plate thickness 1,50 mm︱diam. of the rolls ca. 12 mm︱nomb. of straightening rolls 16 ︱ diameter of the mandrel 180 - 550 mm︱total power requirement 5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Belt support at the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank - Belt support at the outlet
            sheet width 0120 mm
            coil outside dia. 800 mm
            weight max. in kg 150 kg
            plate thickness 1,50 mm
            diam. of the rolls ca. 12 mm
            nomb. of straightening rolls 16
            diameter of the mandrel 180 - 550 mm
            total power requirement 5 kW
            Description :
            - Reel and straightener as a combination with a common frame
            - Manually adjustable reel brake
            - Coil limiting ring at the front, fixed washer at the rear
            - Reel can be moved manually laterally
            - manual reel spreading
            - side belt – guide rollers with central adjustment at the inlet
            - manual block adjustment of the straightening mechanism, display via dial
            gauges
            - Oil - central lubrication
            - Loop control via sensor
            - Speed adjustable via potentiometer
            - Belt support at the outlet
            - Free-standing control panel
            - Lateral adjustment of the reel using a hand crank
            - Belt support at the outlet
          Datasheet
          Request / Contact

          Decoiler - Double

          used  Decoiler - Double AMT AHDR 500/1600


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7807 · Decoiler - Double

          AMT - AHDR 500/1600 - - 2018 -

          Technical details
          sheet width 0150 mm︱coil weight 2 x 0,50 t︱coil internal dia. 250 - 650 mm︱coil inside-diam. ca. 1600 mm︱0 1 - 10 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was never in production - it is like a new one !
            sheet width 0150 mm
            coil weight 2 x 0,50 t
            coil internal dia. 250 - 650 mm
            coil inside-diam. ca. 1600 mm
            0 1 - 10 U/min
            Description :
            - Spreading manually via hand crank
            - Separate control panel
            - Drive infinitely variable via SEW motors and converters
            - Rear contact washer, front limiting ring
            - Loop control via ultrasonic transmitter loops
            Side guide including loop tensioning switch
            - Reel can be moved transversely +/- 50mm via ratchet
            - 4 protective bars for securing the coil

            Machine was never in production - it is like a new one !
          Datasheet
          Request / Contact
          used  Decoiler - Double AMT AHDR 500/1600


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7806 · Decoiler - Double

          AMT - AHDR 500/1600 - - 2018 -

          Technical details
          sheet width 0150 mm︱coil weight 2 x 0,50 t︱coil internal dia. 250 - 650 mm︱coil outside - diam. ca. 1600 mm︱0 1-10 U/min︱engine output 2 x 0,75 kW, insgesamt 2 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was only in operation for a short time!!
            sheet width 0150 mm
            coil weight 2 x 0,50 t
            coil internal dia. 250 - 650 mm
            coil outside - diam. ca. 1600 mm
            0 1-10 U/min
            engine output 2 x 0,75 kW, insgesamt 2 kW
            Description :
            - Spreading manually via hand crank
            - Separate control panel
            - Drive infinitely variable via SEW motors and converters
            - Rear contact washer, front limiting ring
            - Loop control via ultrasonic transmitter loops
            Side guide including loop tensioning switch
            - Reel can be moved transversely +/- 50mm via ratchet
            - 4 protective bars for securing the coil
            Machine was only in operation for a short time!!
          Datasheet
          Request / Contact
          used  Decoiler - Double CAMU SCD 615 M


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7808 · Decoiler - Double

          CAMU - SCD 615 M - - 2008 -

          Technical details
          sheet width 0600 mm︱coil weight 2 x 1,50 t︱coil internal dia. 370 - 630 mm︱coil outside - diam. ca. 1560 mm︱0 12 U/min︱power capacity 1,1 kW︱total power requirement kW︱weight of the machine ca. 1,55 t︱dimensions of the machine ca. 2,60 x 1,20 x 1,90 m︱
          double decoiler with motor, manual expansion, coil loop control
            sheet width 0600 mm
            coil weight 2 x 1,50 t
            coil internal dia. 370 - 630 mm
            coil outside - diam. ca. 1560 mm
            0 12 U/min
            power capacity 1,1 kW
            weight of the machine ca. 1,55 t
            dimensions of the machine ca. 2,60 x 1,20 x 1,90 m
            Description :
            double decoiler
            with motor, manual expansion, coil loop control

          Datasheet
          Request / Contact
          used  Decoiler - Double CORNO ITALY AFDC 150


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7816 · Decoiler - Double

          CORNO ITALY - AFDC 150 - - 1993 -

          Technical details
          sheet width 0350 mm︱coil weight 2 x 1,50 t︱coil internal dia. 360 - 530 mm︱coil outside - diam. ca. 1600 mm︱pinch roll pneumatisch ︱total power requirement kW︱weight of the machine ca. 1,00 t︱dimensions of the machine ca. 2,00 x 2,00 x 2,20 m︱
          - without drive - mech. Spreading with hydraulic. Hand pump
            sheet width 0350 mm
            coil weight 2 x 1,50 t
            coil internal dia. 360 - 530 mm
            coil outside - diam. ca. 1600 mm
            pinch roll pneumatisch
            weight of the machine ca. 1,00 t
            dimensions of the machine ca. 2,00 x 2,00 x 2,20 m
            Description :
            - without drive
            - mech. Spreading with hydraulic. Hand pump
          Datasheet
          Request / Contact

          Decoilers for Coils

          used  Decoilers for Coils UNGERER HSSH y 16/490


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7696 · Decoilers for Coils

          UNGERER - HSSH y 16/490 - - überh./rev. 2006 -

          Technical details
          sheet width - max. 1600/1780 mm︱coil weight 5,00 t︱coil internal dia. 508 mm︱height of the drum over the floor ca. 1150 mm︱total power requirement kW︱weight of the machine ca. 5,50 t︱dimensions of the machine ca. m︱
          Equipment: - Substructure frame - hydraulic - Hydraulic spread - Pressure arm hydraulic - Pressing roller driven - Brake / disc brake - hydraulic Hydraulics not available Dimensions (L x W x H): reel: approx. 3,740 x 1,470 x 1,520 mm Substructure frame: approx. 1,760 x 960 x 600 mm
            sheet width - max. 1600/1780 mm
            coil weight 5,00 t
            coil internal dia. 508 mm
            height of the drum over the floo. 1150 mm
            weight of the machine ca. 5,50 t
            Description :
            Equipment:
            - Substructure frame - hydraulic
            - Hydraulic spread
            - Pressure arm hydraulic
            - Pressing roller driven
            - Brake / disc brake - hydraulic

            Hydraulics not available

            Dimensions (L x W x H): reel: approx. 3,740 x 1,470 x 1,520 mm
            Substructure frame: approx. 1,760 x 960 x 600 mm
          Datasheet
          Request / Contact
          used  Decoilers for Coils NN


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7800 · Decoilers for Coils

          NN - - - 2024 CHECK -

          Technical details
          sheet width - max. 0300/450 mm︱coil weight 2,00 t︱coil internal dia. 360 - 410 mm︱coil outside - diam. ca. 1000 mm︱expansion mechanisch ︱brake mechanisch ︱total power requirement 1,10 kW︱weight of the machine ca. 0,530 t︱dimensions of the machine ca. 1,40 x 1,00 x 1,40 m︱
          - with coil application arms, sheet metal width 300 mm - without front collar contact arms, sheet metal width 450 mm - Jaw length 450 mm - Belt running direction left-right - Bane loop control via dancer roller (start/stop) - Hand crank - 6 arms
            sheet width - max. 0300/450 mm
            coil weight 2,00 t
            coil internal dia. 360 - 410 mm
            coil outside - diam. ca. 1000 mm
            expansion mechanisch
            brake mechanisch
            total power requirement 1,10 kW
            weight of the machine ca. 0,530 t
            dimensions of the machine ca. 1,40 x 1,00 x 1,40 m
            Description :
            - with coil application arms, sheet metal width 300 mm
            - without front collar contact arms, sheet metal width 450 mm
            - Jaw length 450 mm
            - Belt running direction left-right
            - Bane loop control via dancer roller (start/stop)
            - Hand crank
            - 6 arms
          Datasheet
          Request / Contact
          used  Decoilers for Coils GERMANY ABH 1,0/400


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7797 · Decoilers for Coils

          GERMANY - ABH 1,0/400 - - 2023 -

          Technical details
          sheet width - max. 0340 mm︱coil weight 1,00 t︱coil internal dia. 265 - 565 mm︱total power requirement kW︱weight of the machine ca. 0,25 t︱dimensions of the machine ca. 1,40 x 1,20 x 1,80 m︱
          construction: support segment – system no. - support segments 3 length – suppert segments 400 mm working direction left-right / right-left counter ring – Ø 1.600 mm shaft – Ø 70 mm height floor - middle of shaft 840 mm accessories: construction - pedestal construction - rectangular tube positioned under decoiler construction, to proceed the relocation by forklift or similar expanding process manually by bevel gear wheel brake system disc brake brake caliper pneumatically, manufacturer TWIFLEX counter ring 2 pc. option: decoiler equipped with shifting frame (by linear guiding)
            sheet width - max. 0340 mm
            coil weight 1,00 t
            coil internal dia. 265 - 565 mm
            weight of the machine ca. 0,25 t
            dimensions of the machine ca. 1,40 x 1,20 x 1,80 m
            Description :
            construction: support segment – system
            no. - support segments 3
            length – suppert segments 400 mm
            working direction left-right / right-left
            counter ring – Ø 1.600 mm
            shaft – Ø 70 mm
            height floor - middle of shaft 840 mm
            accessories:
            construction - pedestal construction - rectangular tube positioned under
            decoiler construction, to proceed the relocation by forklift or similar
            expanding process manually by bevel gear wheel
            brake system disc brake
            brake caliper pneumatically, manufacturer TWIFLEX
            counter ring 2 pc.
            option:
            decoiler equipped with shifting frame (by linear guiding)
          Datasheet
          Request / Contact
          used  Decoilers for Coils HS-AUTOMATION MS 21 OL


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7812 · Decoilers for Coils

          HS-AUTOMATION - MS 21 OL - - 2011 -

          Technical details
          sheet width - max. 0350 mm︱coil weight 1,00 t︱coil internal dia. 5570 - 750 mm︱coil outside - diam. ca. 1200 mm︱Pay-off Speed 30 m/min︱expansion hydraulisch ︱Drive regelbar ︱total power requirement kW︱weight of the machine ca. 0,650 t︱dimensions of the machine ca. m︱
            sheet width - max. 0350 mm
            coil weight 1,00 t
            coil internal dia. 5570 - 750 mm
            coil outside - diam. ca. 1200 mm
            Pay-off Speed 30 m/min
            expansion hydraulisch
            Drive regelbar
            weight of the machine ca. 0,650 t
          Datasheet
          Request / Contact
          used  Decoilers for Coils MILLUTENSIL SLM 1500.1


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7811 · Decoilers for Coils

          MILLUTENSIL - SLM 1500.1 - - 2009 -

          Technical details
          sheet width - max. 0400 mm︱coil weight 1,50 t︱coil internal dia. 470 - 630 mm︱coil outside - diam. ca. 1600 mm︱0 12 U/min︱total power requirement kW︱weight of the machine ca. 0,850 t︱dimensions of the machine ca. 1,70 x 1,40 x 1,70 m︱
          frequency converter
            sheet width - max. 0400 mm
            coil weight 1,50 t
            coil internal dia. 470 - 630 mm
            coil outside - diam. ca. 1600 mm
            0 12 U/min
            weight of the machine ca. 0,850 t
            dimensions of the machine ca. 1,70 x 1,40 x 1,70 m
            Description :
            frequency converter
          Datasheet
          Request / Contact
          used  Decoilers for Coils HS-AUTOMATION RCA 181


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7805 · Decoilers for Coils

          HS-AUTOMATION - RCA 181 - - 2006 -

          Technical details
          sheet width - max. 0500 mm︱coil weight 2,00 t︱coil internal dia. 350 - 550 mm︱coil outside - diam. ca. 1400 mm︱expansion hydraulisch ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Hydraulic spreading - 6 pieces of clip-on arms for lateral band limitation - Frequency-controlled drive - Loop control via ultrasonic transmitter - Free-standing control cabinet - Pneumatic pressure roller from above, can be moved laterally - Engine brake - Swivel hand control panel - Reel can be moved hydraulically - Loading chair can be swiveled 90°
            sheet width - max. 0500 mm
            coil weight 2,00 t
            coil internal dia. 350 - 550 mm
            coil outside - diam. ca. 1400 mm
            expansion hydraulisch
            Description :
            - Hydraulic spreading
            - 6 pieces of clip-on arms for lateral band limitation
            - Frequency-controlled drive
            - Loop control via ultrasonic transmitter
            - Free-standing control cabinet
            - Pneumatic pressure roller from above, can be moved laterally
            - Engine brake
            - Swivel hand control panel
            - Reel can be moved hydraulically
            - Loading chair can be swiveled 90°
          Datasheet
          Request / Contact
          used  Decoilers for Coils CAMU SC 515/M


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7815 · Decoilers for Coils

          CAMU - SC 515/M - - 2005 -

          Technical details
          sheet width - max. 0500 mm︱coil weight 1,50 t︱coil internal dia. 370 - 630 mm︱coil external diameter 1450 mm︱total power requirement 1,1 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            sheet width - max. 0500 mm
            coil weight 1,50 t
            coil internal dia. 370 - 630 mm
            coil external diameter 1450 mm
            total power requirement 1,1 kW
          Datasheet
          Request / Contact
          used  Decoilers for Coils KEMMERICH V150S


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7787 · Decoilers for Coils

          KEMMERICH - V150S - - 1999 -

          Technical details
          sheet width - max. 0100 mm︱coil weight 0,150 t︱coil internal dia. 320 - 520 mm︱coil outside - diam. ca. 1200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - manually adjustable brake - Rear handguard - Restriction ring in front - Movable on frame
            sheet width - max. 0100 mm
            coil weight 0,150 t
            coil internal dia. 320 - 520 mm
            coil outside - diam. ca. 1200 mm
            Description :
            - manually adjustable brake
            - Rear handguard
            - Restriction ring in front
            - Movable on frame
          Datasheet
          Request / Contact
          used  Decoilers for Coils ARKU AH 3000-400-MSG-4Q


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7781 · Decoilers for Coils

          ARKU - AH 3000-400-MSG-4Q - - 1997 -

          Technical details
          sheet width - max. 0600 mm︱coil weight 3,00 t︱coil internal dia. 465 - 530 mm︱total power requirement kW︱weight of the machine ca. 2,45 t︱dimensions of the machine ca. 2,72 x 1,70 x 2,40 m︱
          material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available
            sheet width - max. 0600 mm
            coil weight 3,00 t
            coil internal dia. 465 - 530 mm
            weight of the machine ca. 2,45 t
            dimensions of the machine ca. 2,72 x 1,70 x 2,40 m
            Description :
            material width (previously) 400 mm
            mandrel length 630 (655) mm
            mandrel – Ø (expanding range) 465 – 530 mm
            height floor - middle of mandrel 1.450 mm
            height upper edge decoiler construction - middle of mandrel 1.050 mm
            working direction (previously) right - left
            accessories:
            construction 3-segment-construction
            decoiler movable on base frame hydraulically
            press arm hydraulically
            press roll not driven
            expanding process mechanically
            decoiler motor driven (via chain) power 3,0 kW
            no. – limiting arms 6
            dimension – limiting arms (l x h) 410 x 180 mm
            valve components mounted at decoiler construction
            control unit (breaker unit) with cable
            hydraulic unit not available
          Datasheet
          Request / Contact
          used  Decoilers for Coils DIMECO 2330 / M


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7814 · Decoilers for Coils

          DIMECO - 2330 / M - - 1991 -

          Technical details
          sheet width - max. 0250 mm︱coil weight 0,500 t︱coil internal dia. 250 - 550 mm︱coil outside - diam. ca. 1150 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            sheet width - max. 0250 mm
            coil weight 0,500 t
            coil internal dia. 250 - 550 mm
            coil outside - diam. ca. 1150 mm
          Datasheet
          Request / Contact
          used  Decoilers for Coils SCHLEICHER HE-100-500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7780 · Decoilers for Coils

          SCHLEICHER - HE-100-500 - - 1988 -

          Technical details
          sheet width - max. 0500 mm︱coil weight 3,00 t︱coil internal dia. 370 - 510 mm︱total power requirement kW︱weight of the machine ca. 0,54 t︱dimensions of the machine ca. 1,25 x 1,08 x 1,67 m︱
          material width (previously) 300 mm mandrel length 500 (510) mm mandrel – Ø (expandig range) 370 – 410 mm dto. with segments 470 – 510 mm height floor - middle of mandrel 1.050 mm height upper edge decoiler construction - middle of mandrel 860 mm accessories: construction 3-segment-construction expanding process mechanically no. – limiting arms 5 dimension – limiting arms (l x h) 400 x 60 mm brake unit mechanically (via star grip) no. – segments 9
            sheet width - max. 0500 mm
            coil weight 3,00 t
            coil internal dia. 370 - 510 mm
            weight of the machine ca. 0,54 t
            dimensions of the machine ca. 1,25 x 1,08 x 1,67 m
            Description :
            material width (previously) 300 mm
            mandrel length 500 (510) mm
            mandrel – Ø (expandig range) 370 – 410 mm
            dto. with segments 470 – 510 mm
            height floor - middle of mandrel 1.050 mm
            height upper edge decoiler construction - middle of mandrel 860 mm
            accessories:
            construction 3-segment-construction
            expanding process mechanically
            no. – limiting arms 5
            dimension – limiting arms (l x h) 400 x 60 mm
            brake unit mechanically (via star grip)
            no. – segments 9
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Perfil del comerciante: Frech GmbH

          Contactar con el comerciante



            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Alemania
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Perfil del comerciante

          Karl Frech, fundada en 1945 por Karl Frech y teniendo a la Sra. Nicole Frech como su gerente de generación de 3rd, puede recordar los años de tradición comercial de 60 en la ciudad de Sinsheim, cerca de Heidelberg, en la región alemana de Baden. 

          Sinsheim se encuentra en la autopista A6, a una distancia de una hora en automóvil desde los aeropuertos de Frankfurt / Main y Stuttgart. FRECH GmbH está especializada en el tratamiento de equipos usados ​​(desbobinadores, rebobinadores, niveladores de rodillos, líneas de bobinas, líneas de perfilado, líneas de corte longitudinal, líneas de laminado en frío, laminadores en frío y amoladoras de rodillos). 

          Además, el equipo de FRECH actúa como agente en los siguientes campos de la maquinaria usada: bobinas, plegadoras, rectificadoras, prensas de frenos, prensas, bobinadoras de chatarra y cizallas. Contáctenos por favor !!! - Te ayudaremos también en otras áreas. En un área de aproximadamente 1000 metros cuadrados de salas y espacios de venta minorista, exhibimos una gama de maquinaria de segunda mano que varía constantemente y están en buenas condiciones de funcionamiento y, en su mayor parte, aptas para la demostración. 

          ¿Por qué maquinaria de segunda mano? 

          La mayoría de las máquinas de segunda mano están disponibles de inmediato y están listas para funcionar. Frech es su primera dirección cuando desea reducir sus costos de capital y aumentar la eficiencia económica de su maquinaria. 

          Comprar y vender maquinaria de segunda mano es una cuestión de confianza. Frech es su mejor contacto.

          NUESTROS CONTACTOS




          Frech GmbH   74889 - Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Abwickelhaspel - Doppel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Lochstanze · Längsteilanlage · Profilstahlschere · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch ·